Jump to content

Ski Bum

Regulars
  • Posts

    1131
  • Joined

  • Last visited

Profile Information

  • Gender
    Not Telling

Recent Profile Visitors

6593 profile views

Ski Bum's Achievements

Forum Veteran

Forum Veteran (4/9)

381

Reputation

  1. The higher end Yamahas lack the variable loudness control that a few of their lower tier still has. I've always found it to be quite useful, particularly for Heritage models, which seem to be voiced at loud levels, where my preferred listening levels are considerably lower, where lower sensitivity to extreme frequencies come into play. When the fancy, expensive AVR decided to bake it's hdmi board to a dysfunctional crisp, I threw in an old Yamaha stereo receiver so we at least had music and sound for the boob tube. Had been using Audyssey DynamicEQ, their version of variable loudness eq. I immediately came to appreciate the relative simplicity, versatility, and effectiveness of Yamaha's old fashioned approach.
  2. Get something with tone controls perhaps? Yamaha stereo gear has useful tone and variable loudness controls. Prolly more reliable than the boutique stuff too.
  3. Ideally, your L, C, and R should be identical. The KEF center, by virtue of it's coax design, is more of an ideal match to your mains and less of a compromise than a horizontal two way Klipsch center. Maybe try goosing the center channel a few db before spending big bucks on a speaker upgrade. Unless the KEFs are distorting, increasing the center channel should help increase speech intelligibility. Could also be diffraction from poor placement. You don't have the center recessed into a cubby in an entertainment center, do you?
  4. It's not "just" a room thing (DaveA makes a valid point re vintage kit, ), but it is the most influential thing and something you can manipulate. The biggest practical difference between your speakers is sensitivity, so for a valid comparison you would have to set the volume about 3db higher with the fortes. Under such circumstances, the fortes may sound equally forward as the chorus. Both chorus II and fII rely on boundary reinforcement for balanced tonal response, so play with how deeply into corners and/or close to walls you can place them. Doing so with the chorus could restore the bottom end to balance with the mids. You'll be surprised by how dramatic a difference a few inches make, particularly as proximity to corners increases. So my suggestion is play around with placement, including toe-in (just as you can tune the bass with placement, the narrow controlled pattern of the mids/tweets can be taken advantage of, e.g. don't place speakers so the main listening position is directly on axis, don't spray high frequencies on walls adjacent to the speakers, expand the sweet spot by taking advantage of time-intensity trading...).
  5. Yes, the fII dig slightly deeper. They're a tad less sensitive as well, but with your room and close proximity that doesn't matter. Each speaker/room pairing is it's own idiosyncratic acoustic thing, and from your description the fortes are the more copacetic match.
  6. 1) On the right track, but I'm with the others suggestions re Jubs/Khorns, which are >>>Rf7. If it's for a behind a screen install where looks don't matter (or if looks simply don't matter), the KI-396 >> RF7. Heck, CW and Forte > RF7 IMO, but that's more debatable. 2) Focals are quite nice. Different approach than Klipsch, similar to what you have with the Dynaudios. (Think room interaction...which approach would suit your situation the best, a speaker with broad dispersion or one with more controlled, narrower dispersion?) 3) What the...? I would never personally spend what you are suggesting for your budget on some odd-ball idiosyncratic design out of left field.
  7. Left eye shooter, that's a bit of a false equivalency, but nice try. Consumer staples are not the same as niche luxury goods. FWIW, half my neighbors brew their own beer (more power to them, it's a messy, smelly hobby) and use soda streams to make their own pop (far cheaper, less waste for the landfills). And, perhaps ironically, that MicroXOTL thingie is in a black metal box, hardly the pinnacle of artisan creativity. My latest build is a plain black box too. As for your suggested design inferiority, that comes from Nelson Pass, whose pedigree and design chops are far from inferior. The impedance matching tech is interesting, but the cost is a still a huge turn off. Maybe when they sell the boards at the DIY sites like Pass does with his niche kit then I'll find it more compelling. But as it is, the thing would have to be made of solid gold to justify $8K/pair pricing.
  8. Erik, if it makes you feel better, I consider pretty much all commercial tube kit to be a rip off. My sense of value has been forged in the DIY realm, which was at least partially inspired by YOU a decade or so ago. So really, it's all your fault!😛
  9. Thanks, Erik, I was hoping to spur some discussion, not misrepresent anybody or anything negatively. Some of us participating in this very thread actually do know what OTL means, have familiarity with parafeed output, etc. If there is merit to the approach, any approach, it should be touted in a way as to not insult our intelligence. Links to the patents may be more useful than links to product pages that are devoid of technical information. Ok, having read the patents at the link you provided, it's still a shockingly poor value proposition IMO.
  10. Initial impression? A shockingly poor value proposition. Erik, any more specific details about this amp's "thinking and design" you care to share? The product page was long on non-technical postmodernism, short on specifics.
  11. It's some chewy food for thought, for sure. Anyone offering a shallow slope, "phase focused" passive two way networks for Jubs yet? Could it be done without the complexity that Danley came up with? I've been toying with the idea of doing some Chris style 402 based MEH, but would probably be more inclined if it could be done passively. Until the budget allows, I'll just have to get my phase correct listening via TB full rangers, or suffer through that horrid phase distortion with my fortes (to their credit, Klipsch heritage three ways push the troublesome crossover frequencies outside our hearing's most sensitive band, which has gotta help somewhat).
  12. On cue, one of the postmodernists chimes in with a rather bizarre contribution to the thread.
  13. Don't fall for the kooky magic wire postmodernism. Doing so will cost ya. Save your ducats.
  14. More often than not, speakers with dual woofers have them wired in parallel and thus tend to present a low-ish load. To be on the safe side, @emmvette, you should probably limit your choice of amps to those rated into 4 ohm loads. There should be plenty of viable options to choose from on the used market in Chicago.
×
×
  • Create New...