510 on top of the La Scala help dialing this in

[Heritage_Head]

4 minutes ago, babadono said:

Levels can be adjusted with the crossover but it is not automatic if that's what you mean.

Level matching the two drivers easier than I’m thinking, or is there a lot that goes into it? Seems like it could be a lot of work if it’s all done by ear (one being all bass and one being all the other).

[MMurg]

@Heritage house - Here is some info from @Chris A that might be helpful.

 

Am I doing this right? comment:  https://community.klipsch.com/index.php?/topic/181099-am-i-doing-this-right/&do=findComment&comment=2340776

 

How to use Room EQ Wizard to set up DSP crossovers:

https://community.klipsch.com/index.php?/topic/167089-using-rew-to-find-parametric-equalizer-peq-settings/

https://community.klipsch.com/index.php?/topic/182892-using-rew-to-determine-time-delays-between-drivers/

 

Active Bi-Amping/Tri-Amping FAQ (DSP crossover FAQ): https://community.klipsch.com/index.php?topic/117543-active-bi-ampingtri-amping-faq/

 

 

[babadono]

A definite pleasing and acceptable adjustment can be made by ear but........to go really deep down this rabbit hole you will need a UMIK(from the miniDSP folks) and REW running on a laptop or PC. Or some equivalent measuring system. Do the amps your going to use have gain controls?

[Heritage_Head]

On 11/23/2022 at 1:19 PM, babadono said:

A definite pleasing and acceptable adjustment can be made by ear but........to go really deep down this rabbit hole you will need a UMIK(from the miniDSP folks) and REW running on a laptop or PC. Or some equivalent measuring system. Do the amps your going to use have gain controls?

Yep they both do.