chuckears Posted September 26, 2001 Share Posted September 26, 2001 I have been the proud owner of a pair of oiled oak Klipsch Fortes for over twelve years now. For most of that time I have used Formby's Lemon Oil. Is there a better wood oil\product available, something to set off the wood better, or to add lustre to the finish? Thanks... Quote Link to comment Share on other sites More sharing options...
Ray Garrison Posted September 26, 2001 Share Posted September 26, 2001 I used Fromby's Tung Oil. It's a mess to apply, and you have to make sure you get a bottle that hasn't been sitting on the shelf in the store for months and months, otherwise it's about the consistency of silly putty, but it protects the wood and shines up the surface like gangbusters. I did this with my KG4 (oak finish) back in 1985, and they STILL look brand spanking new. ------------------ Music is art Audio is engineering Quote Link to comment Share on other sites More sharing options...
dougdrake2 Posted September 26, 2001 Share Posted September 26, 2001 Quaker State - 10W40. The 10W30 is too thin to stand up to the summer heat in Arizona, and the heat the speakers produce when pounding out the Matrix at 200wpc. Actually, I've used Watco Rejuvenating oil (from Home Depot) at the suggestion of SteveP on my walnut Forte's and KG4s, and my oak KG3s, and it gives them a nice, warm glow. DD2 Quote Link to comment Share on other sites More sharing options...
t-man Posted September 26, 2001 Share Posted September 26, 2001 I use the lemon oil myself, with much satisfaction. Looks great. ------------------ KG 5.5 (mains) KG 2.2v (center) KLF-C7 (center in storage) KG 1 (rears) KSW-12 (sub) Denon AVR 681/1601 Toshiba SD-3109 DVD Kenwood LVD700 LD Sony CD changer Sony 27" Trinitron Sony PLX I Quote Link to comment Share on other sites More sharing options...
J M O N Posted September 26, 2001 Share Posted September 26, 2001 I have also used Formby's. It worked well for me. Quote Link to comment Share on other sites More sharing options...
Mike Lindsey Posted September 26, 2001 Share Posted September 26, 2001 I use Howard's Feed-N-Wax and am pretty happy with the results... Mike Quote Link to comment Share on other sites More sharing options...
John Warren Posted September 26, 2001 Share Posted September 26, 2001 I use two parts boiled linseed oil to one part terpentine. mix, set in sun, apply with brush, let stand and wipe clean, repeat. apply every year or so thereafter. your house will smell like an artist studio (nice oil smell) Quote Link to comment Share on other sites More sharing options...
ShapeShifter Posted September 26, 2001 Share Posted September 26, 2001 I use Scott's Liquid Gold on a regular basis for cleaning & dusting the Walnut Oil & Lacquer finishes, and once a quarter I use Formby's Lemon Oil Treatment. Use Guardsman, Concentrate Cream Furniture Polish w/Wood Sent on the black finishes. Guardsman gives a nice low luster sheen to the black finishes. The added Wood Sent smells good too. Wes This message has been edited by ShapeShifter on 09-26-2001 at 07:25 PM Quote Link to comment Share on other sites More sharing options...
Allan Songer Posted September 27, 2001 Share Posted September 27, 2001 I use gunstock oil and then top it off with carnuba wax. Superb results--very cheap. Quote Link to comment Share on other sites More sharing options...
Jim Cornell Posted September 27, 2001 Share Posted September 27, 2001 Yea i use K-Y jelly on mine!! LOL!!! Be carefull using lemon oil, that will turn the wood yellow over years!! What i did was ,,, i cleaned up the wood on my KG series then applied a clear coat of acrylic, scince then, the always had a fantastic shine!! And it also kept the lamination from chipping off!! Also, dont oil the cabinets to often, the lamination will chip off, i oiled mine once a year!! Once the oil sets in, the glue on the lamination looses its strengh!! well, have fun and enjoy!! Regards Jim Quote Link to comment Share on other sites More sharing options...
ShapeShifter Posted September 27, 2001 Share Posted September 27, 2001 Jim, An interesting cautionary note that Lemon Oil may cause yellowing after prolonged use. My once a quarter use sounds like too much. Another poster on a similar thread mentioned a Watco product available at HD. I've heard good reports about their products. I tried find their stains at my local Lowes Hardware, was told they no longer carried them. Think I'll check out HD. Did you refresh your stain before applying the clear coat? Wes 7 Quote Link to comment Share on other sites More sharing options...
chuckears Posted September 27, 2001 Author Share Posted September 27, 2001 Hmmm, so now I understand why the finish has been looking sickly yellow... so any idea how to clean that old oil out, and will re-staining be required? (Thanks for the previous replies, BTW). Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.