CECAA850 Posted February 9, 2021 Author Posted February 9, 2021 1 minute ago, MookieStl said: These dry Januarys lead to long wet Februarys. I have read that several times. Still no idea what you said. Dang, let me tried again. sounds like you need another cup of coffee. Take 2 subs. Turn the first one upside down and place it on the floor with the mouth on top as opposed to the bottom. Place another one on top of it in the normal orientation. The 2 mouths will be next to each other and should couple. You capisce or need pictures? Quote
rockhound Posted February 9, 2021 Posted February 9, 2021 1 hour ago, CECAA850 said: While you're playing put one upside down and another right side up onto of it with the mouths next to each other. One pair in each ft corner. I did this with a pair and thought it sounded good but looked funny. Quote
MookieStl Posted February 9, 2021 Posted February 9, 2021 1 minute ago, CECAA850 said: Dang, let me tried again. sounds like you need another cup of coffee. Take 2 subs. Turn the first one upside down and place it on the floor with the mouth on top as opposed to the bottom. Place another one on top of it in the normal orientation. The 2 mouths will be next to each other and should couple. You capisce or need pictures? I got it the first time, just reading what you actually wrote was amusing (to me). Quote
rockhound Posted February 9, 2021 Posted February 9, 2021 2 minutes ago, CECAA850 said: Dang, let me tried again. sounds like you need another cup of coffee. Take 2 subs. Turn the first one upside down and place it on the floor with the mouth on top as opposed to the bottom. Place another one on top of it in the normal orientation. The 2 mouths will be next to each other and should couple. You capisce or need pictures? My need to draw it out with crayons so @MookieStl will understand lol. Quote
rockhound Posted February 9, 2021 Posted February 9, 2021 Diz - What do you have the subs crossed at? Quote
MookieStl Posted February 9, 2021 Posted February 9, 2021 Just now, rockhound said: I did this with a pair and thought it sounded good but looked funny. I lay them on their side and put the mains on top of them. I think you did something similar at one point with Heresy's. Quote
MookieStl Posted February 9, 2021 Posted February 9, 2021 3 minutes ago, rockhound said: My need to draw it out with crayons so @MookieStl will understand lol. I am partially color blind, so don't use the fancy 64 pack, it would be wasted on me. But circles and arrows help. Quote
rockhound Posted February 9, 2021 Posted February 9, 2021 36 minutes ago, MookieStl said: I lay them on their side and put the mains on top of them. I think you did something similar at one point with Heresy's. Yes I found this to be the best way to have them in my room. 1 Quote
NBPK402 Posted February 9, 2021 Posted February 9, 2021 Yes I found this to be the best way to have them in my room.What sub Is that under the belle?Sent from my SM-T830 using Tapatalk Quote
CECAA850 Posted February 9, 2021 Author Posted February 9, 2021 11 minutes ago, NBPK402 said: What sub Is that under the belle? Sent from my SM-T830 using Tapatalk This whole thread is about the Exodus Anarchy 25hz tapped horn. 1 Quote
NBPK402 Posted February 9, 2021 Posted February 9, 2021 This whole thread is about the Exodus Anarchy 25hz tapped horn.That is what I need for my MEHs. I wish I could get a flatpack still or some plans... I know where I can get some CNC work done if I had the plans.Sent from my SM-T830 using Tapatalk Quote
CECAA850 Posted February 9, 2021 Author Posted February 9, 2021 Just now, NBPK402 said: That is what I need for my MEHs. I wish I could get a flatpack still or some plans... I know where I can get some CNC work done if I had the plans. Sent from my SM-T830 using Tapatalk Contact @MookieStl , I believe he CNC'd his and may have plans still. Be sure to use crayon, arrows and circles to illustrate what you want or it will be a long conversation. Eventually he'll say that he understood you the first time though. 2 Quote
Vince1966 Posted February 13, 2021 Posted February 13, 2021 I'm building 2 of these subs now, plan on using the Anarchy 708 Mid woofer from DIYsoundgroup but I am still up in the air on a decent amp to drive them with my pioneer sx1050. any recommendations that will not kill the bank? thanks Quote
rockhound Posted February 13, 2021 Posted February 13, 2021 6 minutes ago, Vince1966 said: I'm building 2 of these subs now, plan on using the Anarchy 708 Mid woofer from DIYsoundgroup but I am still up in the air on a decent amp to drive them with my pioneer sx1050. any recommendations that will not kill the bank? thanks I used a bash 300 plate amp with my dual's has high level inputs. Quote
MookieStl Posted February 13, 2021 Posted February 13, 2021 11 minutes ago, Vince1966 said: I'm building 2 of these subs now, plan on using the Anarchy 708 Mid woofer from DIYsoundgroup but I am still up in the air on a decent amp to drive them with my pioneer sx1050. any recommendations that will not kill the bank? thanks Not sure what the "best" is, but I use the Dayton SA230. Since you bought 8 ohm speakers, it can drive both of your subs with it. I like the outboard amps so no crawling around to adjust crossover, phase, gain, etc. Your receiver has pre outs so you can loop the signal through the sub amp and back to your receiver. Fairly simple set up. About the right amount of power for those drivers. Many good options. Quote
DizRotus Posted February 13, 2021 Posted February 13, 2021 I use a pair of Behringer iNuke1000dsp amps. The low price (one was an “open box” from Parts Express), class D operation, balanced inputs, and dsp to set the crossover make them nearly perfect for my needs. Even though iNukes are notoriously overrated as to power, each amp is able to easily drive a pair of 8 ohm TH subs. I removed the noisy fans and never turn them off. There have been ZERO problems now for several years. 1 Quote
Vince1966 Posted February 13, 2021 Posted February 13, 2021 thank you, i like the idea of one plate amp, i have a nice old speaker cab i can fit it into to dress it up. Quote
DizRotus Posted February 13, 2021 Posted February 13, 2021 10 minutes ago, Vince1966 said: thank you, i like the idea of one plate amp, i have a nice old speaker cab i can fit it into to dress it up. My son uses a Dayton plate amp to drive one with good results. There is no way to build a plate amp into the design without substantially altering the internal dimensions, or having it look like a goiter. Some sort of external case is the best solution. Quote
DizRotus Posted February 13, 2021 Posted February 13, 2021 On 2/9/2021 at 9:17 AM, rockhound said: Diz - What do you have the subs crossed at? 80 Hz, or possibly lower, I’d have to connect a laptop to the iNukes to be certain. The “Supered” HIPs roll off naturally. The dsp in the iNukes control the slope and frequency range of the crossovers to the subs. It’s interesting to add or subtract the subs or the mains during playback. For instance, during the opening of DSOTM, turning off the iNukes greatly diminishes the heartbeats, but turning off the mains has very little effect on the heartbeats. Quote
CECAA850 Posted February 14, 2021 Author Posted February 14, 2021 13 hours ago, Vince1966 said: thank you, i like the idea of one plate amp, i have a nice old speaker cab i can fit it into to dress it up. Parts express has metal enclosures for their plate amps or at least they used to. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.