Jump to content

Light Oak KLF20's & Cherry RC-7 for sale in Minneapolis


patmcnevi

Recommended Posts

I am selling my good condition KLF-20's for $600

 

The Specs are

FREQUENCY RESPONSE:34Hz-20kHz(+-)3dB
SENSITIVITY:100dB @ 1watt/1meter
POWER HANDLING:200 watts maximum continuous (800 watts peak)
NOMINAL IMPEDANCE:8 ohms
TWEETER:K-79-K 1" (2.54cm) Compression Driver
HIGH FREQUENCY HORN:90(o)x40(o) Exponential Horn
MIDRANGE:K-52 1.5" (3.81cm) Compression Driver
MID FREQUENCY HORN:90(o)x60(o) Tractrix Horn
WOOFER:Two K-1036-K 10" (25.4cm) Poly Carbon Graphite Cones
CROSSOVER FREQUENCY:HF 7,000 Hz
LF 750 Hz
ENCLOSURE MATERIAL:Medium density fiberboard construction (MDF)
ENCLOSURE TYPE:Bass reflex via dual rear-mounted ports
DIMENSIONS:40.75" (103.51cm) x 12" (30.48cm) x 16" (40.64cm)
WEIGHT:86.5 lbs. (39.27kg)
FINISH:Oak

 

I am selling my Cherry RC-7 with cosmetic blemishes that are cabinet only for 300 - SOLD!!!!!!

 

The specs are 

FREQUENCY RESPONSE: 45Hz-20kHz¿3dB 

SENSITIVITY: 98dB @ 1watt/1meter 
POWER HANDLING: 200 watts maximum continuous (800 watts peak) 
NOMINAL IMPEDANCE: 8 ohms 
ENCLOSURE TYPE: Bass reflex via dual rear-mounted ports 
TWEETER: K-67-DV 1.75" (4.45cm) Titanium dome compression driver 
HIGH FREQUENCY HORN: 8" square 90¿x60¿ Tractrix¿ Horn 
HIGH FREQUENCY CROSSOVER: 550Hz and 1950Hz 
WOOFER: Two K-1083-SB 8" (20.32cm) Cerametallic¿ cone / cast polymer frame 
DIMENSIONS: 9" (23cm) x 26" (66.5cm) x 12" (30.7cm) 
WEIGHT: 42 lbs. (19kg) 
ENCLOSURE MATERIAL: Medium density fiberboard construction (MDF)

 

They can be shipped via ups.

post-17289-0-93220000-1452653025_thumb.j

post-17289-0-81260000-1452653051_thumb.j

post-17289-0-41580000-1452653065_thumb.j

Edited by patmcnevi
Link to comment
Share on other sites

 

How much for shipping on the RC-7 to

 

539 East, 5th St.
Neche, ND, USA
58265
 
Thanks!

 

 

 

@Noobzilla if you also pay $30.00 for shipping it is yours

Get insurance, quite a few instances of shipping damage on the RC-7 even when shipping the drivers separately.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...