Jump to content

My HT RF system


USparc

Recommended Posts

The DV-525 does the job very nice. It plays everything.

Indeed the remote sucks, but I don't use it. All the functionality is programmed in the remote of my onkyo.

There are still some "minor" things that will forse me to upgrade soon or later: Display can not be dimmed (who taught I would need that but still it can be handy) The transfo can be noisy at times (just a pitch tone my ears are sensitive to.)

The tray when opening/closing could also be smoother.

Don't mind this, it still is a good player. I like it's simplisity.

Indeed the RF-3 are certainly not small.

When I got my first pair they looked so huge in the room. In the store they seemed a lot smaller.

Later I got a second pair. Smile.gif

------------------

-------------------------

Receiver: Onkyo 676

DVD: Pioneer DV-525

Screen: Thomson 46" RetroProjection

Front: RF-3 tFTP

Rear: RF-3 tFTP

Center: RC-3 tFTP

Link to comment
Share on other sites

Nice! Must sound great! Smile.gif

------------------

Will be getting the following in December.

Home Theater:

TV: Sony KV-ES38M91 (38" FD Trinitron WEGA)

Receiver: Denon AVC-A11SR (230V version of Denon AVR-4802)

DVD player: Sony DVP-S9000ES

VCR: Sony SLV-ED100 (HiFi VCR)

Center: Klipsch RC-7

Mains: Klipsch RF-7

Surrounds: Klipsch RS-7

Subwoofer: SVS CS-Ultra w/Samson S1000 amplifier

Link to comment
Share on other sites

nice, very nice. how does that ceiling effect the accoustics? friend has a dome HT room... sounds pretty cool.

how much did that TV cost? how is its pic? looking ofr one... looked at a 43", 55" and 61" today... 1799-2399

------------------

-justin

I am an amateur, if it is professional;

ProMedia help you want email Amy or call her @ 1-888-554-5665

Klipsch Home Audio help you want, email support@klipsch.com or call @ 1-800-KLIPSCH

RA# Fax Number=317-860-9140 / Parts Department Fax Number=317-860-9150

Link to comment
Share on other sites

The ceiling reflects the sound in another direction to prevent standing waves. Standing waves amplifies or attenuate certain frequencies. So in my case the frequency response is more flat. The music sounds more natural because of this "more" flat frequency response.

And indeed a dome would be perfect because nothing is symetric so no standing waves can occure.

The list price of the Thomson here in Belgium is 100.000 BEF(2180$). I got it for 85.000 BEF (1853$).

The picture quality is very good. I wouldn't go back to a normal TV. This is the one peace in my system I won't upgrade untill it fails to do what it is supposed to do. Smile.gif

------------------

-------------------------

Receiver: Onkyo 676

DVD: Pioneer DV-525

Screen: Thomson 46" RetroProjection

Front: RF-3 tFTP

Rear: RF-3 tFTP

Center: RC-3 tFTP

Link to comment
Share on other sites

Hey Wes!

I was just up your way over the weekend in Flint. We went to the girlfriend's parents' house for a third Thanksgiving dinner in four days. I checked out a couple hi-end stores in the area. The most promising one had a sign on the door saying that appointments are being accepted and look for the new store soon, this note put up some time in July!! I'm not sure what street it was on but it was near Miller Road (we stayed at the Motel-6) and the other was about 5 miles south off Route 23.

Boy, coming home on 23 and 75 South was pretty rough yesterday. The wind was blowing from right to left on the highway about 40mph or so. Spent nearly four hours just trying to keep the car straight and the SUV's off my butt. Is it just me or does everyone up there drive crazy? cwm20.gif I mean, the speed limit is 70mph, o.k. that means I may be able to push it to 85 if I'm lucky. But these people were passing me at what had to be 90+!cwm1.gif

------------------

Tom

KLF-20 Mahogany (Cornell Hotwired)

McIntosh C33 Preamp

McIntosh MVP-841 CD/DVD

Rotel RB-1080 Amp

Yamaha PF-800 Turntable/ Sure V15 Type V Cartridge

Ortofon VMS-30 mkII Cartridge

Stanton 999SS Cartridge

Yamaha K-1020 Cassette

dbx 1231 EQ

H.H. Scott 830z Analyzer

Monster Interlink 400mk II

Monster Interlink 300mk II

Monster Video 2 (DVD to TV)

Studio Tech U-48RW Cabinet

Monster Power HTS-5000 Power Conditioner/Surge Protector

Original 12ga. Monster Cable (But MIT Terminator 2 Bi-Wire is coming!)

Enough empty boxes for a fire hazard!

Link to comment
Share on other sites

Hey tblasing - Glad you had a safe trip. Yes, locals do tend to drive a bit too fast. But I find it is their lack of patience and courtesy for other motorist that is the cause of most of their accidents. Do hope you both had a wonderful holiday.

Wes

------------------

"KLIPSCH IS MUSIC"f>

This message has been edited by ShapeShifter on 11-26-2001 at 03:07 PM

Link to comment
Share on other sites

quote:

Originally posted by Mike Lindsey:

Sparc,

Very nice setup! Is your equipment cabinet located behind your TV? Very clean and simple...

Mike


Yep it is. I like symmetry, so no racks between the speakers! It was convenient because I had to move the TV forward to get the center on top of it. So the space behind the TV is there, why not use it. Smile.gif

------------------

-------------------------

Receiver: Onkyo 676

DVD: Pioneer DV-525

Screen: Thomson 46" RetroProjection

Front: RF-3 tFTP

Rear: RF-3 tFTP

Center: RC-3 tFTP

Link to comment
Share on other sites

Thx for all the replies.

See also my RF tweaked post. Any reaction?? Opinion??

------------------

-------------------------

Receiver: Onkyo 676

DVD: Pioneer DV-525

Screen: Thomson 46" RetroProjection

Front: RF-3 tFTP

Rear: RF-3 tFTP

Center: RC-3 tFTP

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...