CECAA850

Also remember that a crossover is not a brick wall. If your crossover is 80 hz, there will still be information sent to the speaker below that frequency. I've heard a "rule of thumb" that you want your speakers to be able to go 1/2 to 1 octave below your crossover point.

Can you re-veneer? http://community.klipsch.com/forums/t/119832.aspx

So the sub will be for music only, not movies?

That's an awesome price for a great center channel. It's not timber matched to the rest of your speakers however. I might be tempted to pick it up anyways and scout out some deals on some matching Reference speakers for a future upgrade of your front soundstage.

How did THAT username not get used before? Edit, he's from '06. I just looked at the post count.

Agreed. What other subs have you owned?

???? Hope all is well in your personal life. Carl

X2. Do some surfing and check them out. Great price/performance ratios.

I think the speakers are bookshelf type 2 ways. Do they work? Can he send you pics? I don't know about the rest of the stuff.

JB, don't turn this into a political discussion and get the thread locked. Kindly take the pic of Obama down.

Yeah, that kit looks pretty neat. If I'd have known about that site when I built my system, I'm sure I would have shopped there instead of fabricating everything from scratch.

If so, you'll be in the same boat as joesporster in trying to change your username[].

I doubt he's got a USB on his receiver but THIS kit (at the same site) looked like it had everything he needed.

I use 3 of THESE to exhaust hot air out of my equipment area. I've also changed out the 4 fans in my QSC's with Panasonic units. With all 7 fans running, it's still virtually silent. All you hear is the faintest sound of air moving but only if the volume is completely off.

I just looked up the specs on the fan you are thinking about ordering. 47.5 dBa. I think that it may be a little loud for your application. I'd be looking at fans rated 15 dBa or less.

Job well done. You should be proud. X2 on the feet comment.

I didn't see a dB reading on that fan. You want to make sure the fan you're using isn't too loud otherwise it will be a distraction. I mounted 2 extremely quiet 12v fans on the back of my entertainment center. I ran a 12v trigger to a switched outlet of my surge protector and plugged in a 12v converter to run the fans with. It keeps things nice and cool. I've got 4 pro amps and an Anthem D2 making heat in a very small area and never have heat build up. This is a pic with my old Crown amps. You can barely see the top of one of the fans on the left side over the D2. I also put a fan on top of the D2 (black box on the right) to help pull heat off of it. Click on the pic to make it larger.

Welcome to the forum. Great first post! What type gear will go along with your speakers?

Looks like he got his wish.

The $2.00 resistor mod that Dean talked me through really was an improvement on taming the top end. If you can solder, you might contact him for info.

ONCE you get your room issues taken care of, the QSC PLX2's sound great with RF-7's. Not harsh at all.

I'm about 50 posts behind you!

If your receiver comes with a mic and calibration software then all you do is follow the manual. If not, buy a disc like AVIA and an SPL meter from Radio Shack. The disc will walk you through the calibration process.

Sent. I hope your bad times are very brief. Carl

ive heard the term overkill mentioned once or twice in the past Headroom is my middle name[]