Jump to content
The Klipsch Audio Community
DizRotus

WANT TO BUY HIP expanded metal woofer grilles.

Recommended Posts

The attached photo was stolen from Google to illustrate the type of metal grilles I’m looking to buy to use with a pair of HIPs I’m refurbishing.  I’m aware of the typical waffle grilles available from PartsExpress (PE), Amazon, etc., but I want the look of the Klipsch expanded metal grilles.

 

Please PM me if you have a pair to sell. 

 

73E0C77E-0EE8-43FA-A454-0CE934D08907.jpeg

Share this post


Link to post
Share on other sites

I've always said those grills look like the metal grating of a wrought iron patio chair.

IMG_20200130_193252.jpg

  • Like 2

Share this post


Link to post
Share on other sites
5 hours ago, Mighty Favog said:

I've always said those grills look like the metal grating of a wrought iron patio chair.

IMG_20200130_193252.jpg

sold

Share this post


Link to post
Share on other sites
8 hours ago, DizRotus said:

The attached photo was stolen from Google to illustrate the type of metal grilles I’m looking to buy to use with a pair of HIPs I’m refurbishing.  I’m aware of the typical waffle grilles available from PE, Amazon, etc., but I want the look of the Klipsch expanded metal grilles.

 

Please PM me if you have a pair to sell. 

 

CHECK  with  longdrive03,

 

HIP REDO WITH VENEER

By longdrive03, December 16, 2019 in Technical/Modifications

  • Thanks 1

Share this post


Link to post
Share on other sites

There was a guy selling a pair of those on eBay last week with the board and everything to mount them.

 

  • Thanks 1

Share this post


Link to post
Share on other sites
11 hours ago, Mighty Favog said:

I've always said those grills look like the metal grating of a wrought iron patio chair.

IMG_20200130_193252.jpg

 

Indeed they do.  Do you think she’d notice a couple holes?

 

woofer_back.thumb.jpg.aafbfb06a12b67da36cd830e18a4e1a6.jpg

 

woofer_front.thumb.jpg.ffa38643e3edf371e2fe4db739f198ab.jpg

 

1663340764_20181223_192451(Medium).thumb.jpg.a95f74fa5bf38e18615179726b6da9cb.jpg

 

The generic waffle grilles look and work fine, but I like the Klipsch look of the expanded metal.  They provide physical protection with minimal acoustic or visual obstruction.

  • Like 1

Share this post


Link to post
Share on other sites

DizRotus,

 

I am still deciding what to do with the pair of HIP's.  If I don't keep them intact  I'll be glad to sell these to you.  They are metal grills with wood frames.

 

So far I've removed all components and sanded the black paint off cabinets and filled in the handle hole on top.  I'm thinking about filing in the front vent and make them super Heresys ala Claude with vent on back and new veneer.

 

Also thinking about parting out the components and using empty cabinets with other Heresy parts I have.

Share this post


Link to post
Share on other sites
1 hour ago, longdrive03 said:

DizRotus,

 

I am still deciding what to do with the pair of HIP's.  If I don't keep them intact  I'll be glad to sell these to you.  They are metal grills with wood frames.

 

 

yep , sure hope that works out -for both of you -

Share this post


Link to post
Share on other sites
On 1/31/2020 at 7:22 AM, DizRotus said:

 

Indeed they do.  Do you think she’d notice a couple holes?

 

woofer_back.thumb.jpg.aafbfb06a12b67da36cd830e18a4e1a6.jpg

 

 

 find the manufacturer of this metal table and you might be pretty close  to getting what you need ,  this metal mesh looks very thick , however  , the HIP metal grills might be thinner gauge metal

Share this post


Link to post
Share on other sites

You can find this material with a google search. Search for "expanded metal" do not search for mesh or perforated (they are different products).

 

It should not be too difficult to cut depending on what you have access to. However for the the "molded" version (not the flat version) shown in one of the above photos it can become fairly involved and beyond most garage projects (especially if it is a thick material). 

You will need to find out the thickness or gauge of the material and what it is made out of (I assume steel, but I do not know). 

 

Good luck,

-Tom

  • Thanks 1

Share this post


Link to post
Share on other sites

Diz

 

Here is a pic of the grills.  Should know soon if I'm parting them out

IMG_0001.JPG

  • Thanks 1

Share this post


Link to post
Share on other sites
29 minutes ago, longdrive03 said:

Diz

 

Here is a pic of the grills.  Should know soon if I'm parting them out

 

- Hey Longdrive -----------can you please do us a favor and measure the thickness ( Gauge )  of the metal grille material - Most obliged

Share this post


Link to post
Share on other sites
37 minutes ago, longdrive03 said:

Diz

 

Here is a pic of the grills.  Should know soon if I'm parting them out

 

great man , DIZ will need these for sure

Share this post


Link to post
Share on other sites
42 minutes ago, longdrive03 said:

Diz

 

Here is a pic of the grills.  Should know soon if I'm parting them out

IMG_0001.JPG

 

Thanks for the pic.  Seeing the grilles out of the enclosures makes it easier to visualize and understand the differences. Apparently, the Kosher HIP grilles are flat, unlike the PE grilles, one of which is shown below, which are formed into convex domes.  Rolling flat expanded metal to match the contour of the PE grilles is not something I can—or want to—do.

 

It was mentioned above that the expanded metal grilles are more open than the PE waffle grilles, therefore, the waffle grilles would block and/or color the sound more than the expanded metal.  At the frequencies involved, I’m certain these old ears could not tell the difference at gunpoint in a blind comparison.

 

For me it comes down to aesthetics. I like the look of the formed PE grilles in the woofer openings with the round-over.  I prefer the openness of the expanded metal.  If it too was available with the contour of the PE grilles, the decision would be easy.  Either version will protect the woofers. At this point each has points for and against.

 

1663340764_20181223_192451(Medium).thumb.jpg.a95f74fa5bf38e18615179726b6da9cb.jpg

Share this post


Link to post
Share on other sites

here is a pic of the back of the grills.

 

Metal is approximately 3/32" thick.  Must be aluminum because magnets dont stick.IMG_0002.thumb.JPG.3d6f625e2b1785641fb26507a0bbd171.JPG  

  • Thanks 1

Share this post


Link to post
Share on other sites
3 minutes ago, longdrive03 said:

Must be aluminum because magnets dont stick

 

That’s interesting and a surprise.

  • Like 1

Share this post


Link to post
Share on other sites
1 hour ago, longdrive03 said:

here is a pic of the back of the grills.

 

Metal is approximately 3/32" thick.  Must be aluminum because magnets dont stick.

bolt on grilles -

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...