Panelhead Posted December 1, 2020 Share Posted December 1, 2020 Please do not laugh. But try 2 Micromega MyAmp integrated amplifiers. Only issue for me is they only have RCA inputs. Doubt if the bass bin needs more than 60 watts. If you do, that is shakin’. Quote Link to comment Share on other sites More sharing options...
Ziggurat Posted December 1, 2020 Author Share Posted December 1, 2020 2 hours ago, Panelhead said: Please do not laugh. But try 2 Micromega MyAmp integrated amplifiers. Only issue for me is they only have RCA inputs. Doubt if the bass bin needs more than 60 watts. If you do, that is shakin’. I wouldn't laugh... all suggestions are valuable. Having 200+ watts at hand did get me in a frac of hot water with my neighbor five houses down the other night..... 🙂 1 1 Quote Link to comment Share on other sites More sharing options...
Panelhead Posted December 1, 2020 Share Posted December 1, 2020 7 hours ago, Ziggurat said: I wouldn't laugh... all suggestions are valuable. Having 200+ watts at hand did get me in a frac of hot water with my neighbor five houses down the other night..... 🙂 Back when I had Altec horns, my nearest neighbor was at least 500’ away. She called at 2:00 am demanding to “TURN IT DOWN. Said her kids were crying. That was with a lowly Carver Cube. Early 80’s. Today I am sure one of those headphone amps or a 45 tube amp would be plenty loud. Seems that 1 watt gets plenty loud. The MyAmps surprised me. Purchased one because I always like Micromega products. And Accesories4Less was closing them out at 229.000 USD. Matched up so good with LS II that I ordered a couple more. Tried stereo connection, balanced bridged, currently passive biamp. They are easy to integrate into system with active subs. 1 Quote Link to comment Share on other sites More sharing options...
Ziggurat Posted December 10, 2020 Author Share Posted December 10, 2020 Well, some good news... found a pair of Bryston 7bST amps here in NZ .. whaddyall reckon? 500wpc of Canadian goodness be 'nuff for the Jube bins? 🙂 4 Quote Link to comment Share on other sites More sharing options...
Schu Posted December 10, 2020 Share Posted December 10, 2020 Look for a pair of bel canto class D's... they have a dampening factor >1000 1 Quote Link to comment Share on other sites More sharing options...
rigma Posted December 10, 2020 Share Posted December 10, 2020 Ziggurat both myself and Mike use Jensen IsoMax transformers near the input of the of the amp (within a foot) and have no hum. rigma (marion) Quote Link to comment Share on other sites More sharing options...
MC39693 Posted December 10, 2020 Share Posted December 10, 2020 @Ziggurat you just can't beat Canadian muscle! (Let the games begin). Seriously, Bryston gets a lot of good reviews here along with Classe, but hard to find a real "deal". I think your bass bins will be happy. Quote Link to comment Share on other sites More sharing options...
Ziggurat Posted December 10, 2020 Author Share Posted December 10, 2020 4 hours ago, Schu said: Look for a pair of bel canto class D's... they have a dampening factor >1000 Dammit - a pair of those came up locally last week, "Bel Canto" sounded a bit fruity for me, so I passed. Hopefully the Bryston's DF of 300 @ 20hz should be sufficient. 4 hours ago, rigma said: Ziggurat both myself and Mike use Jensen IsoMax transformers near the input of the of the amp (within a foot) and have no hum. rigma (marion) Great info - thank you. I have Deuland resistors arriving with extremely low inductance so I can build build an L-Pad with circa -12db to get the amp idle noise to near zero. I think I mentioned the cheap resistors I have in there have taken a fraction of 3d effect out, hopefully the Deulands will be better. Switching to SPDIF (optical) output on my PC has helped - no hard-wire connection to the downstream components. The PC is the main problem, sending noise back through the AC, and through it's own outputs, it seems. Time for a Bluesound Node 2i, methinks - get the PC right out of the system. I will also run a couple of new, filtered lines from my switchbox which should help. My house is old, and the wiring system is less than ideal. Quote Link to comment Share on other sites More sharing options...
Ziggurat Posted December 10, 2020 Author Share Posted December 10, 2020 26 minutes ago, MC39693 said: @Ziggurat you just can't beat Canadian muscle! (Let the games begin). Seriously, Bryston gets a lot of good reviews here along with Classe, but hard to find a real "deal". I think your bass bins will be happy. Heres hoping, aye? 🙂 🙂 🙂 Quote Link to comment Share on other sites More sharing options...
babadono Posted December 10, 2020 Share Posted December 10, 2020 14 hours ago, Ziggurat said: Well, some good news... found a pair of Bryston 7bST amps here in NZ .. whaddyall reckon? 500wpc of Canadian goodness be 'nuff for the Jube bins? 🙂 These are going to BLOW!(you out of the room that is). Quote Link to comment Share on other sites More sharing options...
babadono Posted December 10, 2020 Share Posted December 10, 2020 4 hours ago, rigma said: Jensen IsoMax transformers +1 Quote Link to comment Share on other sites More sharing options...
Ziggurat Posted December 10, 2020 Author Share Posted December 10, 2020 Just now, babadono said: These are going to BLOW!(you out of the room that is). Perfect for those low-level late-night whiskey sessions then 🙂 Quote Link to comment Share on other sites More sharing options...
babadono Posted December 10, 2020 Share Posted December 10, 2020 1 minute ago, Ziggurat said: Perfect for those low-level late-night whiskey sessions then 🙂 Aye Quote Link to comment Share on other sites More sharing options...
Ziggurat Posted December 10, 2020 Author Share Posted December 10, 2020 1 minute ago, babadono said: Aye Cant see them ever breaking a sweat... damn... just looking at the slew rate in the specs...! Quote Link to comment Share on other sites More sharing options...
Chris A Posted December 10, 2020 Share Posted December 10, 2020 6 hours ago, rigma said: Ziggurat both myself and Mike [mikeTN] use Jensen IsoMax transformers near the input of the of the amp (within a foot) and have no hum. rigma (marion) Me, too... The RCA analog-only connection into the First Watt F3 picks up a fair bit of common mode noise (power line 60/120/180/240 Hz hum). The ISO-MAX reduces that noise floor at least 20-30 dB in my experience, even though my connecting RCA analog cables are just over 1 ft. in length. The ISO-MAX filter doesn't subjectively affect the sound quality at all. They're a bit spendy however. I recommend them highly, nevertheless. All my other connections (i.e., seven other stereo amplifiers) are XLR/balanced and have no issues with noise floor. Chris Quote Link to comment Share on other sites More sharing options...
Ziggurat Posted December 11, 2020 Author Share Posted December 11, 2020 4 hours ago, Chris A said: Me, too... The RCA analog-only connection into the First Watt F3 picks up a fair bit of common mode noise (power line 60/120/180/240 Hz hum). The ISO-MAX reduces that noise floor at least 20-30 dB in my experience, even though my connecting RCA analog cables are just over 1 ft. in length. The ISO-MAX filter doesn't subjectively affect the sound quality at all. They're a bit spendy however. I recommend them highly, nevertheless. All my other connections (i.e., seven other stereo amplifiers) are XLR/balanced and have no issues with noise floor. Chris Is this what you are referring to team? Quote Link to comment Share on other sites More sharing options...
Chris A Posted December 11, 2020 Share Posted December 11, 2020 Here is a link to the particular version that I use: https://www.parts-express.com/jensen-iso-max-pi-2xx-dual-channel-xlr-line-input-isolator--246-0124 Chris Quote Link to comment Share on other sites More sharing options...
Ziggurat Posted December 11, 2020 Author Share Posted December 11, 2020 1 minute ago, Chris A said: Here is a link to the particular version that I use: https://www.parts-express.com/jensen-iso-max-pi-2xx-dual-channel-xlr-line-input-isolator--246-0124 Chris Thanks Chris Quote Link to comment Share on other sites More sharing options...
Ziggurat Posted December 17, 2020 Author Share Posted December 17, 2020 A quick update. I've picked up the Bryston 7bst monoblocks and set them up to power the Jube bins. They took some time to fully warm up, but once they did, the rewards were very apparent... The bass is now super fast, clean, dry, immediate - free of blurring. Really hearing seperate tones right down to the lower registers.. I even seem to have picked up a few extra hz! (Need to confirm this) Again, the characteristics of these amps are considerably different to the other gear, with the closest comparison being the Macrotech. But the Brystons have an edge over the big Crown in terms of speed and clean edges... I don't envy my neighbors tonight.... 1 Quote Link to comment Share on other sites More sharing options...
Chris A Posted December 17, 2020 Share Posted December 17, 2020 One of the things that I found with using the zero-phase crossover approaches is that, even after further FIR filters were applied to my surround array using Dirac, the reduction in phase growth (i.e., lagging phase as the frequency decreases) is flattened back toward zero phase, the perception of bass goes up, rather dramatically in fact. Last year in the K-402-MEH thread, I posted the following figure from a tube amplifier (Mullard ECL86 amplifier, 3 w/channel, apparently single-ended, documented in 1962) that raised my eyebrows a bit: Notice how the the phase shift of the amplifier itself adds about 45-60 degrees of phase lead below 175 Hz. This is probably some part of what you're hearing with your Bryston SS. If you added FIR filtering to your Jubs using something like rePhase, Dirac, JRiver, etc., you would perceive even more bass response, in my experience, all due to the correcting phase shift back toward zero phase at low frequencies. Additionally, you'll notice that the phase lag at higher frequencies of this tube amplifier is compensating for some of the typical phase lead that you see above 10 kHz, another interesting effect from tubes. Now, if you ask me what I actually think about tube amplifiers, you might get a totally different response than you might otherwise think (I don't like them), I do see a couple of reasons why people think they're injecting "magic" into their systems. They're also injecting something else that isn't magic (soft clipping is typical, especially for very low power SETs, etc.) that I don't care for, and a bunch of other nonlinear stuff that I would prefer not to deal with. But if you're into "euphonic distortion" of tubes/valves, this is one effect that is no longer in the "magic" pile, something that's easily measurable. Chris 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.