Trey Cannon

For home use.... Dolby-Atmos-Home-Theater-Installation-Guidelines 2017.pdf

Standard ATMOS locations......that's what the Dolby team tells me. That is the way I design.....I look at them as 90 deg...not 105...Just like most our other in ceiling gear. IF you get better coverage...gravy.

They will work great...We have used them in small cinemas....and homes. remember the depth...they are deeper than most home in ceiling speakers. OH...Roy D engineered them.

It does not...It has a special HF unit made from the R-2650-CSM... 2 0.75in. poly tw. I think that unit has a limited life time warranty. I will look through my junk to see if i can find one...BUT you are up for a hell of a fight to get that unit out. Everything is glued and screwed in that speaker. The "snot" they glue with is nasty good. If I had seen this last week, I just tossed a cabinet with the TW unit in it.... IF you blew the tweeter, then you must have been using a small amp and driving the snot out of it...too much power ALWAYS blew the woofer and or the TW caps. I never blew a TW in power testing. Power for speakers are like your car...you need more power at hand than you use at all times...You drive up to about 70-80 mph...your car has a good bit of power left at that point...you run that car at red line and it won't last long...the same with amps and speakers.

Jill DID build a new room for her horns...Before she took them home. Yes, we get good pricing and MANY of us have product. Some, just view it as a job...Most have quite a passion for audio. You won't get banned...just corrected. This story is TRUE.

I may have a few...😜

I think the plant can still build them....Call to check.

OK...not sure what they did...you do not have a picture of the 3000 series. they have IMG cones that are copper in color. you have pictures of the new CS-16C II. It started life a few years back as the R-1650-C. Great little entry level speaker. They have been updated to have the magnet grills and new plastic trim. In version II they went to a new vendor of parts and changed the drivers a little...just to get a little more from it. https://www.klipsch.com/custom-install/in-ceiling/custom-series

trey.cannon@klipsch.com 317-294-3239 9-5 EST ⚰️

I have to find it. Our house is a storage location right now. Our stuff, Kids stuff, Mom's stuff.... a little birdy gave me your address.

Dolby-Atmos-Home-Theater-Installation-Guidelines 2017.pdf

W.D.S.T Klipsch Wide Dispersion Surround Technology surround speakers take a different approach to surround coverage than dipole and bipole surrounds. A Dipole models place drivers out of polarity to create a null on one axis of the speaker. It is popular to sit in the null, thus the loudest sounds come from indirect radiation from the speaker. A dipole, used in this manner creates a diffuse and non-localized rear sound field. 1) Some drawbacks to dipole surrounds include that the rear sound field is not confined to the rear. As much radiation is radiated forward as rearward. 2) A dipole also depends on other surfaces in the room to reflect the sound to the listener. 3) A dipole can only create a diffuse rear sound field. 4) Finally, a dipole is very inefficient at low frequencies, as the out of phase bass cancels. B Bipole models place drivers on several faces, with the idea that the radiation is equal in all directions, like a point source. 1) The problem is that the drivers interact, and actually radiate sound very erratically, with a different frequency response in each direction. 2) The sound field created is not coherent and as a result is not very realistic. C) Klipsch WDST surrounds are very much like a professional concert array. The high frequencies, made directional by the horn, are arrayed at the proper angles to provide even coverage, or with the same frequency response in all directions. The single woofer is crossed over where it is omni directional, thus creating a system that truly radiates sound equally in all directions. 1) WDST models provide balanced direct and reverberant sound field to listeners. Since the response is the same in all directions, the reverberant sound filed reaching the listeners from other directions, is balanced spectrally with the direct sound, creating a coherent, realistic rear sound field.

first we don't make bi-pole speakers... Most any surround will work...we use both versions in the cinemas. KPT-1200VBM is what I use...LS III in front

the K-510 is real close

This is an open letter I sent to the company today...I wanted to share here too. Happy Birthday Paul W. Klipsch! I would love to tell the old man that a few more times. I have been to a few of his birthday parties. I think my favorite one was his 96th. My wife at the time and myself were invited to visit them at a friend of theirs home in Hot Springs. We met with Steve and Becky Phillips there. They had just been to Hope for the first Pilgrimage and received the invite from Mrs. Valerie. Once we all were there, we ate, talked and listened. That’s right, we set and listened to Khorns with PWK on his birthday. In my book that has a supper high cool factor. Not long after that, Klipsch offered Steve a job and he and family moved up to Indy and I made a new best friend. I would like everyone to take a min. to think about their job and that PWK made that posable. We owe a ton to that man and I for one am very thankful. When Paul passed, I told Valerie that Gabriel needed help with his horn so they called Paul up to help. I look forward to hearing that horn someday. Trey Cannon – Systems Engineer

I have pictures of Steve Phillips and I listening at 124.9 at 15 ft. on the back of the couch in the listening room next to the chamber. 2 60th khorns aragon 3002 300x2 amp stageone pre/pro bs wires in the wall (some engineer ran cat 5 x6 for each run...he was fired)

Hello all...over the last few days I have been told that I no longer work for Klipsch... ....Not by Klipsch mind you, but by others. Not sure where this came from, but I am still here. " well my card let me in this morning...we will see after lunch ;)"

The part we have now is a TI driver. you will have to replace them all. K-792-ti

Send these type of request to prosystemdesign@klipsch.com...send me the layout and my team will make suggestions. Trey Cannon.

Maybe...I will look

I bet that was WWR days... Roy may remember.

Yes, they can be ordered "RAW"

Yes Sir it will work well. Not quite the impact that the low mid of the Jub, but holds its own.

I started getting feedback about 10am.....You guys have fun...wish I was there.

No matter what you hear...it's not true. I expect a full download after this gathering. Remember I have my spy's.....