Taz Posted December 8, 2013 Share Posted December 8, 2013 (edited) I am still reluctant to go cordless. Is then 18v and 20v stuff good? I hate having batteries run out or torque go down when you need it. A corded 4A to 6A drill can do wonders. I love my 18v tools. Keep a battery in the charger while using the other one in the tools. That way I never run out of power. As for my little 18v impact driver, I put wheels on a PU and planned to tighten with a lug wrench before taking it home. Well I forgot. When I got home I took a lug wrench to them. No need, they were all tight. Edited December 9, 2013 by Taz Quote Link to comment Share on other sites More sharing options...
JL Sargent Posted December 9, 2013 Share Posted December 9, 2013 What do I use the impact for? So many uses. So much time saved. Here are a few examples: Can install one 8 x 4 ft sheet of 1 1/16" thick 19ply shipping container flooring with a Dewalt 1/2" 18v impact gun on on one charge. This over doing the same job with an electric impact that weights twice as much and have to have a generator/welder running to even use. Installing lug nuts on wheels, installing bigger lag bolts is another good one for this tool. Dewalt, Ryobi, etc 1/4" drive cordless impact is used for smaller rusted fasteners and screws on outdoor industrial equipment that any other way would take forever. Swapping out torn or missing mudflaps on chassis is one example. Running in bolts on engine parts before torque wrench saves time. If it has more than one or two fasteners I use an impact of some kind. Simply put these guns get the fasteners tighter, quicker, than any other way. It is better than a drill for everything except drill bits. Quote Link to comment Share on other sites More sharing options...
tigerwoodKhorns Posted December 9, 2013 Author Share Posted December 9, 2013 (edited) If I still did a bunch of Auto work I would get the impact. I stopped the car stuff a while ago. I am thinking about this 1/2" Makita for a strong 1/2 drill that can also be used for mixing thinset: http://www.amazon.com/Makita-6302H-2-Inch-Variable-Reversible/dp/B00004YOEM/ref=sr_1_68?s=power-hand-tools&ie=UTF8&qid=1386564881&sr=1-68 $104 after the holiday discount. Should last a lifetime. This looks like a nice 3/8" drill to add too, but I would like a keyless chuck. The Makitas with the keyless did not get really good reviews and this one seems indestructible: http://www.amazon.com/Makita-6407-8-Inch-Variable-Reversible/product-reviews/B000244WWG/ref=dp_top_cm_cr_acr_txt?showViewpoints=1 I like Dewalt tools, but the reviews all say that their drills ramp up to speed too quickly. The low speed control is important and I have had good luck with Makita tools. Edited December 9, 2013 by tigerwoodKhorns Quote Link to comment Share on other sites More sharing options...
JL Sargent Posted December 9, 2013 Share Posted December 9, 2013 Those both look like they will do the jobs you decribe well. Quote Link to comment Share on other sites More sharing options...
Rivernuggets Posted December 10, 2013 Share Posted December 10, 2013 I have had good luck with Makita tools. Same here. Bought this Makita jigsaw last year and it does a great job:http://www.amazon.com/Makita-4350FCT-Top-Handle-L-E-D-Light/dp/B0010X2GLC Angled cuts or curves are not a problem, even in cross laminated plys of hardwood. Also have a large Makita belt sander. They make good stuff. Quote Link to comment Share on other sites More sharing options...
tigerwoodKhorns Posted December 10, 2013 Author Share Posted December 10, 2013 OK, got a question for you. I have a very old B&D jigsaw (1970s or 1980s) that I only use when absolutely necessary. I cannot get a nice smooth cut out of it (circles are not exactly round). Is the Makita a big improvement? It will be worth it to get a new one if I do not dread using it. Quote Link to comment Share on other sites More sharing options...
CECAA850 Posted December 10, 2013 Share Posted December 10, 2013 OK, got a question for you. I have a very old B&D jigsaw (1970s or 1980s) that I only use when absolutely necessary. I cannot get a nice smooth cut out of it (circles are not exactly round). Is the Makita a big improvement? It will be worth it to get a new one if I do not dread using it. HERE's what you need. It's pricey, but you won't dread using it. Quote Link to comment Share on other sites More sharing options...
Moderators dtel Posted December 11, 2013 Moderators Share Posted December 11, 2013 I am still reluctant to go cordless. Is then 18v and 20v stuff good? I hate having batteries run out or torque go down when you need it. A corded 4A to 6A drill can do wonders. I love my 18v tools. Keep a battery in the charger while using the other one in the tools. That way I never run out of power. As for my little 18v impact driver, I put wheels on a PU and planned to tighten with a lug wrench before taking it home. Well I forgot. When I got home I took a lug wrench to them. No need, they were all tight. I love my 18v drill, never tried any higher voltage, it gets used alot, my normal corded drill died and I never replaced it. If it's something really tough I do have one of those old time Break your wrist and arms geared drills at about 20 pounds and dangerous . I was drilling a 1'' hole in a old stump one day and the bit became jammed, almost broke my arm and came to a stop only after it coiled up about 20' of extension cord, it really scared me and I hate to us it now. Quote Link to comment Share on other sites More sharing options...
mustang guy Posted December 11, 2013 Share Posted December 11, 2013 (edited) I am still reluctant to go cordless. Is then 18v and 20v stuff good? I hate having batteries run out or torque go down when you need it. A corded 4A to 6A drill can do wonders. I love my 18v tools. Keep a battery in the charger while using the other one in the tools. That way I never run out of power. As for my little 18v impact driver, I put wheels on a PU and planned to tighten with a lug wrench before taking it home. Well I forgot. When I got home I took a lug wrench to them. No need, they were all tight. I love my 18v drill, never tried any higher voltage, it gets used alot, my normal corded drill died and I never replaced it. If it's something really tough I do have one of those old time Break your wrist and arms geared drills at about 20 pounds and dangerous . I was drilling a 1'' hole in a old stump one day and the bit became jammed, almost broke my arm and came to a stop only after it coiled up about 20' of extension cord, it really scared me and I hate to us it now. I was cutting a 2" hole through a 1/8" steel bulkhead between some peddles in a car over the summer and like to ripped my fingers off. I self stitched with butterflies, but damn that hurt. I then read the directions on the $35 drill bit which said "WARNING: Use only cordless drill." dtel, I'm with you. I love my 18V cordless drill. Mine is a Ryobi and I bought an extra battery. It has plenty of power, battery lasts, and most importantly charges very quickly. Edited December 11, 2013 by mustang guy Quote Link to comment Share on other sites More sharing options...
mustang guy Posted December 11, 2013 Share Posted December 11, 2013 If you are looking to replace that old impact wrench, here is what I bought, and LOVE. It is lightweight, extremely strong, and durable so you can drop it without worrying. http://www.ingersollrandproducts.com/am-en/products/tools/impactools/maintenance-automotive-impactools/1-2-drive/2135timax-series Quote Link to comment Share on other sites More sharing options...
Moderators dtel Posted December 11, 2013 Moderators Share Posted December 11, 2013 That's a nice impact, I would need a new compressor first, BUT I need a bigger workshop even before that, it never ends. Quote Link to comment Share on other sites More sharing options...
The Dude Posted December 11, 2013 Share Posted December 11, 2013 Thats not a bad price, I have IR impact I purchased 12 years ago. It still works, I use it at my home. I would like to have it rebuilt then I just end up buying a new one. Quote Link to comment Share on other sites More sharing options...
Rivernuggets Posted December 11, 2013 Share Posted December 11, 2013 (edited) OK, got a question for you. I have a very old B&D jigsaw (1970s or 1980s) that I only use when absolutely necessary. I cannot get a nice smooth cut out of it (circles are not exactly round). Is the Makita a big improvement? It will be worth it to get a new one if I do not dread using it. I don't know Black & Decker jigsaws of the 70s-80s, but I can say this Makita makes smooth cuts. It has a four position blade tilt adjustment. At zero it's a straight 90 degrees for a smooth cut. Or rotate/adjust to cut faster for rough cuts. Edited December 11, 2013 by Rivernuggets Quote Link to comment Share on other sites More sharing options...
tigerwoodKhorns Posted December 16, 2013 Author Share Posted December 16, 2013 Gotta bump this thread. What type of jigsaw, barrel or d handle? The Makitas have an LED that looks like a nice feature. Bosch or Makita? Quote Link to comment Share on other sites More sharing options...
McMiRA Posted December 16, 2013 Share Posted December 16, 2013 I just picked up a dewalt cordless. Seems to have the same build quality as the old corded on that it replaced. I'm sure it's a great saw but I have only made one cut with it so far using a throw away blade that I twisted rushing some holes in the pouring rain. I'm sure it'll be great when I get a chance to run a good blade on some good wood. Quote Link to comment Share on other sites More sharing options...
Rivernuggets Posted December 16, 2013 Share Posted December 16, 2013 Gotta bump this thread. What type of jigsaw, barrel or d handle? The Makitas have an LED that looks like a nice feature. Bosch or Makita? I'm the Makita jigsaw pusher. It's a D handle. The LED is a nice feature.....your shadow doesn't get in the way of seeing your intended cut. It's motor also blows most of the dust away from the blade area. Here it is: http://www.amazon.com/Makita-4350FCT-Top-Handle-L-E-D-Light/dp/B0010X2GLC Quote Link to comment Share on other sites More sharing options...
JL Sargent Posted December 17, 2013 Share Posted December 17, 2013 I noticed on R Nugs link that there is a $25 off orders over $100 on Makita tools so that one goes down to $125.00. Can't buy a new one on Ebay for that right now. Quote Link to comment Share on other sites More sharing options...
tigerwoodKhorns Posted December 17, 2013 Author Share Posted December 17, 2013 (edited) OK, got a question for you. I have a very old B&D jigsaw (1970s or 1980s) that I only use when absolutely necessary. I cannot get a nice smooth cut out of it (circles are not exactly round). Is the Makita a big improvement? It will be worth it to get a new one if I do not dread using it. I don't know Black & Decker jigsaws of the 70s-80s, but I can say this Makita makes smooth cuts. It has a four position blade tilt adjustment. At zero it's a straight 90 degrees for a smooth cut. Or rotate/adjust to cut faster for rough cuts. I am looking at that one and the Makita Barrel handle one. http://www.amazon.com/Makita-4351FCT-Barrel-L-E-D-Light/dp/B0013E4AKI/ref=sr_1_4?s=hi&ie=UTF8&qid=1387248929&sr=1-4&keywords=makita+jig+saw This Bosch one looks good too: http://www.amazon.com/Bosch-JS470EB-7-Amp-Barrel-Grip-Jigsaw/dp/B004323NQ4/ref=sr_1_4?s=hi&ie=UTF8&qid=1387249034&sr=1-4&keywords=bosch+jig+saw JL, Amazon also has the same $25 off, free shipping and their prices tend to be lower. They have the same deal on Dewalt. Edited December 17, 2013 by tigerwoodKhorns Quote Link to comment Share on other sites More sharing options...
Rivernuggets Posted December 18, 2013 Share Posted December 18, 2013 What are the advantages of a barrel type handle? Quote Link to comment Share on other sites More sharing options...
tigerwoodKhorns Posted December 18, 2013 Author Share Posted December 18, 2013 It is supposed to be a more comfortable holding position to control the saw. If the saw does not vibrate much, the D handle is probably just fine. I don't know. On a similar topic, I also need a new welding helmet (MIG welding). Any suggestions? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.