jimjimbo Posted July 22, 2014 Share Posted July 22, 2014 Just bought a beautiful Pioneer receiver, SX-1250, awesome condition, 165 watts/channel. However, as is the case with many of these vintage components, the speaker connectors on the rear are the sketchy spring loaded types that look like they will only accept a maximum of 14 awg. There is no way I'm hooking up any of my Heritage speakers with 14 awg wire....Any suggestions on how to modify these connectors or other thoughts? Thanks. Quote Link to comment Share on other sites More sharing options...
Schu Posted July 22, 2014 Share Posted July 22, 2014 whats wrong with those connectors? Quote Link to comment Share on other sites More sharing options...
CECAA850 Posted July 22, 2014 Share Posted July 22, 2014 other thoughts? It can't be done and you'll never be happy with it. Send it to me, I'll be happy to pay shipping. 1 Quote Link to comment Share on other sites More sharing options...
CECAA850 Posted July 22, 2014 Share Posted July 22, 2014 Will a banana end fit in there? Quote Link to comment Share on other sites More sharing options...
TasDom Posted July 22, 2014 Share Posted July 22, 2014 http://www.monoprice.com/Product?c_id=104&cp_id=10401&cs_id=1040115&p_id=5975&seq=1&format=2 Quote Link to comment Share on other sites More sharing options...
muel Posted July 22, 2014 Share Posted July 22, 2014 http://www.monoprice.com/Product?c_id=104&cp_id=10401&cs_id=1040115&p_id=5975&seq=1&format=2 That's what I use on mine. Quote Link to comment Share on other sites More sharing options...
babadono Posted July 22, 2014 Share Posted July 22, 2014 Or these solder type from parts express: http://www.parts-express.com/gold-12-awg-speaker-pin-connector-pair-solder-type--091-300 I've used them on both speakers and amps that have those "squeeze" type connections. Accepts up to 12 AWG, cute little red and black booties for polarity. Quote Link to comment Share on other sites More sharing options...
twistedcrankcammer Posted July 22, 2014 Share Posted July 22, 2014 jimjimbo, #14 gauge wire will support 1800 watts, so there is no need for larger wire unless you have some really long runs to take care of. If you have to have a larger wire, pin connectors are your friend. I run silver plated #10 gauge wire and my brother in law runs #8 on his K-Horns. There is no sonic improvement, it is only a bragging right thing. There is nothing wrong with running lamp cord. Roger 1 Quote Link to comment Share on other sites More sharing options...
Taz Posted July 22, 2014 Share Posted July 22, 2014 (edited) I'd be careful how you use these adapters. Ask me how i KNOW? I had the red and black speaker wire at the amp touch. A little heat shrink tubing would have saved it. I do prefer a soldered wire as it seems easier to place into the amp speaker out out, If I had a preference for one of the other adapters I would use heat shrink tubing to mark and PROTECT the speaker wires Solder 1/2" inch of 14 G on each 12 G wire to connect to receiver. Have done this and it works. Can't say what I want, total brain fart??? Pull a few strands off the #12 G wire so it will fit the spring loaded speaker wire connector. Then solder the end of the wire. If you use just the smallest dab of solder you can it makes a nice looking connector and works well. Better then any connector to fit adapt a larger wire to smaller clip wire connector. I'm sure there are better but I don't know of them Edited July 22, 2014 by Taz 1 Quote Link to comment Share on other sites More sharing options...
proklipsch Posted July 22, 2014 Share Posted July 22, 2014 Just bought a beautiful Pioneer receiver, SX-1250, awesome condition, 165 watts/channel. However, as is the case with many of these vintage components, the speaker connectors on the rear are the sketchy spring loaded types that look like they will only accept a maximum of 14 awg. There is no way I'm hooking up any of my Heritage speakers with 14 awg wire....Any suggestions on how to modify these connectors or other thoughts? Thanks. Pioneer SX-1250 back end.JPG Pioneer SX-1250 back end right.JPG I saw someone else ask if you could fit banana plugs in there, and the answer is obviously no, but yeah, see if you can replace them with the twisty posts that you stick nanner plugs in! I use nanner plugs all around! Quote Link to comment Share on other sites More sharing options...
muel Posted July 22, 2014 Share Posted July 22, 2014 Whoops... I forgot to add that I put electrical tape on one of the ends to prevent shorts. Taz was right about the danger but I was lucky enough to notice that they might touch before I turned on the receiver. Quote Link to comment Share on other sites More sharing options...
RRR Posted July 22, 2014 Share Posted July 22, 2014 Why not just use your wire strippers to reduce your ends to 14 gauge wire, then solder the ends to prevent shorts. No need to buy fancy connectors. 1 Quote Link to comment Share on other sites More sharing options...
Taz Posted July 22, 2014 Share Posted July 22, 2014 (edited) Whoops... I forgot to add that I put electrical tape on one of the ends to prevent shorts. Taz was right about the danger but I was lucky enough to notice that they might touch before I turned on the receiver. I was using tape and did not realize it had come loose. Thus I now support the use of Heat shrink tubing. "Why not just use your wire strippers to reduce your ends to 14 gauge wire, then solder the ends to prevent shorts. No need to buy fancy connectors" I Agree with this not buying fancy connectors. Edited July 22, 2014 by Taz Quote Link to comment Share on other sites More sharing options...
eth2 Posted July 22, 2014 Share Posted July 22, 2014 Congratulations on the SX1250. I have been looking at them for awhile but have not found one on the right condition. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.