Jerrycfl1 Posted September 27, 2015 Share Posted September 27, 2015 Hi all, I just signed up to the board here, and I'm excited to become of the community that you guys have built ! I've been working with Klipsch Home audio gear in terms of sales and installation since 1987 , while working at Read Brothers Stereo in Chas SC, and then became involved with Pro Audio and Lighting in the late 90's. I have just repurchased a complete KP 600 system I originally owned years ago, and am now in the process of getting it back to 100%. My rig has 2 x 680 SW, 2 x 650 LF, 2 x 650 HF, 2 x Fly Bars, Aerquip Straps , Dolly Caster plates and 2 x 600 EC crossovers, all powered by a Carver/QSC rack. Overall the system is in very good shape, and I just need to re cone 2 x K41 M and replace 2 x K78 diaphragms and it should be ready to rock. Since I have the KP 650 MF modules open, I'll take some pics and post them for all to see I'm hoping that I can share some info on my rig, and would be glad to help answer any questions that I can. I am curious if any one has a specific paint recommendation for touch on the 600's ? They look in very good shape, but I would like to touch them up some. My KPs have some pretty cool quilted speaker covers that fit on the stack when its on the dolly, and I'll send pics of them too. Thanks again for all the valuable info that is on the site, and I look forward to meeting you guys. Jerry Seay Zenithlighting jerry@zenithlighting.com 4 Quote Link to comment Share on other sites More sharing options...
TasDom Posted September 27, 2015 Share Posted September 27, 2015 Welcome to the forum. You might enjoy this newer thread here: https://community.klipsch.com/index.php?/topic/159292-old-speaker-question-kp-600-series-loudspeaker-system/ Quote Link to comment Share on other sites More sharing options...
MORE KLIPSCH PLEASE Posted September 27, 2015 Share Posted September 27, 2015 Hey Jerry.... Welcome to forum.... Sounds like you have a killer system.... I would love to latch on to more of the Klipsch Pro line... The only pro-line I have is two sets of KP-362's and yes I love the way they sound. I power the one set with a Carver TFM-42 yea it get's em bumping for sure. What kind of Carver's are you using? I have always liked the way the Carver's sound with the Klipsch. Post some pic's for sure....again welcome... MKP :-) Quote Link to comment Share on other sites More sharing options...
twistedcrankcammer Posted September 27, 2015 Share Posted September 27, 2015 Hi all, I just signed up to the board here, and I'm excited to become of the community that you guys have built ! I've been working with Klipsch Home audio gear in terms of sales and installation since 1987 , while working at Read Brothers Stereo in Chas SC, and then became involved with Pro Audio and Lighting in the late 90's. I have just repurchased a complete KP 600 system I originally owned years ago, and am now in the process of getting it back to 100%. My rig has 2 x 680 SW, 2 x 650 LF, 2 x 650 HF, 2 x Fly Bars, Aerquip Straps , Dolly Caster plates and 2 x 600 EC crossovers, all powered by a Carver/QSC rack. Overall the system is in very good shape, and I just need to re cone 2 x K41 M and replace 2 x K78 diaphragms and it should be ready to rock. Since I have the KP 650 MF modules open, I'll take some pics and post them for all to see I'm hoping that I can share some info on my rig, and would be glad to help answer any questions that I can. Welcome Jerry! We hope you stay for a while and post often I already had a 6 Box KP-600 system and a buddy of mine Kevin Harmon, another friend Roy Delgado, and I just scooped up an additional 30 boxes. Kevin got 6 and already had 6 so he now has 4 stacks, Roy got two high frequency boxes and two mid frequency boxes which he plans on pairing with the new KPT-1802 Horn Sub, and I got the remaining 20 boxes. The original electronic cross overs are few and far between, Kevin has a pair, and I have a pair. Would love to see some pictures of your stuff! Roger I am curious if any one has a specific paint recommendation for touch on the 600's ? They look in very good shape, but I would like to touch them up some. My KPs have some pretty cool quilted speaker covers that fit on the stack when its on the dolly, and I'll send pics of them too. Thanks again for all the valuable info that is on the site, and I look forward to meeting you guys. Jerry Seay Zenithlighting jerry@zenithlighting.com 1 Quote Link to comment Share on other sites More sharing options...
Ceptorman Posted September 27, 2015 Share Posted September 27, 2015 Welcome Jerry….like George Costanza said…."now THAT'S an entrance"!!! Quote Link to comment Share on other sites More sharing options...
Coytee Posted September 28, 2015 Share Posted September 28, 2015 Is it me or does it seem like it's been raining KP 600's lately? Personally, I think it's a wonderful thing! 1 Quote Link to comment Share on other sites More sharing options...
Moderators Travis In Austin Posted September 29, 2015 Moderators Share Posted September 29, 2015 Welcome to the forum. Do you carry High End Lighting Systems? Quote Link to comment Share on other sites More sharing options...
Jerrycfl1 Posted October 12, 2015 Author Share Posted October 12, 2015 Hi all, been a little while, busy with a lot of Music Festivals that we are doing lighting for. I'm still working on getting my rig back up, and just got in the 10" recone kits that the KP 600s need. I'll try to post more updates BTW- if anyone comes across a set of KP 680s for sale, I may be in the market to add more to my rig And for any that may be interested, Zenith Lighting carries a wide range of Professional Lighting equipment, including ETC, VariLite,High End, Clay Paky, Martin, Robe, AVO and many more, so if I can be of any help on a lighting related project, please contact me @ jerry@zenithlighting.com. Thanks, Jerry Seay Quote Link to comment Share on other sites More sharing options...
Joey B KP600 Posted October 25, 2015 Share Posted October 25, 2015 Hi guys been off the forum for about two years. Good luck with your KP 600 I have a 24 box system I have been using for the better part of 20 years, still is the best sounding reinforcement I have ever heard!! If you need any help with them I know them very well as all I use is Klipsch. Good luck Joey B. 3 Quote Link to comment Share on other sites More sharing options...
twistedcrankcammer Posted October 26, 2015 Share Posted October 26, 2015 Joey B., Good talking to you a couple of weeks back and GREAT to see you on the forum again! Roger Quote Link to comment Share on other sites More sharing options...
Jerrycfl1 Posted June 3, 2016 Author Share Posted June 3, 2016 Finally getting around to working on the 600 Rig ! I just reconed the 10" Mids, my 1st attempt at doing so. They meter right, and the voice coils dont rub, so Im hoping that they'll sound right once back in the cabinets. I did run into a problem, both of my EC 600 crossovers have some of the Clip Indicator LED's on even when there is no signal present. I picked up a Furman 4 Way crossover to use while I get the EC 600s sorted out, any recommendations on who may be able to service the EC 600s for me ? I'm hoping to get my 600's up and operational in the next week or so, so I'll try to send over pics and let you guys know what progress has been made Thanks for any and all help . Jerry Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.