dm465531 Posted September 28, 2016 Posted September 28, 2016 Well I got my first tube piece of stereo equipment and I am pleasantly surprised. I picked up a Fisher 400 from a friend of mine who told me everything was working on it and the price was right. I took a chance and it pairs with the Heresy II rather well. Only listening to my chromecast but I should get my turntable back in shortly. What are the best products to clean metal surfaces with and the best way to get rid of the filth? New to tubes and like it. 1 Quote
muel Posted September 28, 2016 Posted September 28, 2016 Magic Eraser works well without damaging the print. It's like... well... Magic! I'd still be careful and if you scrub enough it will still remove more than you want. Try in inconspicuous spot first of course. Assuming that it isn't causing any trouble, I'd work over the whole thing in multiple passes. That way you get a more even result and can stop before you go too far. Be careful with the face plate. Quote
dirtmudd Posted September 28, 2016 Posted September 28, 2016 http://www.nevrdull.com. use the same caution as above mentioned Quote
RRR Posted September 28, 2016 Posted September 28, 2016 I like Simple green and a soft paint brush for face plates while soaking the knobs in a Simple green/water solution scrubbing after with a scrub brush. Quote
dm465531 Posted September 28, 2016 Author Posted September 28, 2016 Thanks for the help fellas. Quote
tube fanatic Posted September 29, 2016 Posted September 29, 2016 Do you know if the receiver has been restored? If not, it's worth very serious consideration. Also, keep in mind that the output tubes used are very costly (at least to me)- even the modern version isn't cheap so you want to be sure that all operating voltages and circuit parameters are within spec. https://www.tubedepot.com/products?utf8=✓&keywords=7868 http://www.thetubestore.com/Tubes/7868-Tube-Types/Electro-Harmonix-7868 http://www.thetubestore.com/Tubes/7868-Tube-Types/7868 Maynard Quote
dm465531 Posted September 30, 2016 Author Posted September 30, 2016 As far as I know it has not been restored. I am not that knowledgeable on how to replace transistors and capacitors. I have thought about ordering a restore kit but haven't yet. I played a few songs and did not notice any fluctuations in sound. I will check out the tube site tomorrow. Thanks Quote
tube fanatic Posted September 30, 2016 Posted September 30, 2016 Restoring a unit like this is definitely not a beginner's project, especially since the voltages encountered under the chassis can be lethal. In addition, if you plan to use the FM tuner section, and replace various caps in it, alignment will be necessary afterwards. This requires some fairly sophisticated test equipment. If you really like the receiver, and plan to keep it, I'd send it out for a professional restoration. Maynard 2 Quote
jimjimbo Posted September 30, 2016 Posted September 30, 2016 Recommend you contact Craig at http://www.nosvalves.com/ 2 Quote
Rjk1972 Posted October 2, 2016 Posted October 2, 2016 I'll second Craig. He did amazing work on my 500c and that was after another tech did a half *** job on it. Very affordable too. It is one amp I will be keeping forever. Quote
JJkizak Posted October 2, 2016 Posted October 2, 2016 And don't worry about the output tubes going blue when you hit a huge bass note at loud volumes. JJK Quote
muel Posted October 6, 2016 Posted October 6, 2016 Once in a while I think about selling my 500c but then I'll spend the day letting it play music for me and I wonder what in the world was I thinking. That is a fun receiver! Quote
geoffr Posted October 24, 2016 Posted October 24, 2016 I had my 400 restored and totally love it. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.