Jeff Matthews Posted February 22, 2022 Share Posted February 22, 2022 Hi, Everyone. It's been a while. My brother asked me to post to get information, including contact information, on anyone who can recap his LaScala xovers back to factory spec? Thanks. Quote Link to comment Share on other sites More sharing options...
wuzzzer Posted February 22, 2022 Share Posted February 22, 2022 JEM Performance Audio. They're the only Klipsch authorized facility for that kind of work. https://jemperformanceaudio.com/ Quote Link to comment Share on other sites More sharing options...
Budman Posted February 22, 2022 Share Posted February 22, 2022 https://jemperformanceaudio.com/ they will sell you the caps but getting them to rebuild them ? i'm not sure they will do that but it never hurts to ask Quote Link to comment Share on other sites More sharing options...
billybob Posted February 22, 2022 Share Posted February 22, 2022 Think you have to send in your old networks after convincing you have no business with a soldering iron around you. Quote Link to comment Share on other sites More sharing options...
OO1 Posted February 22, 2022 Share Posted February 22, 2022 48 minutes ago, Jeff Matthews said: Hi, Everyone. It's been a while. My brother asked me to post to get information, including contact information, on anyone who can recap his LaScala xovers back to factory spec? Thanks. PM @JEM Performance Quote Link to comment Share on other sites More sharing options...
Moderators Travis In Austin Posted February 22, 2022 Moderators Share Posted February 22, 2022 3 hours ago, Jeff Matthews said: Hi, Everyone. It's been a while. My brother asked me to post to get information, including contact information, on anyone who can recap his LaScala xovers back to factory spec? Thanks. Get the caps, bring some vinyl with the crossovers and new caps to San Antonio and Luther and I will do it for you (I will supervise, Luther will solder). Quote Link to comment Share on other sites More sharing options...
Moderators Travis In Austin Posted February 22, 2022 Moderators Share Posted February 22, 2022 1 minute ago, Travis In Austin said: Get the caps, bring some vinyl with the crossovers and new caps to San Antonio and Luther and I will do it for you (I will supervise, Luther will solder). Or, have him come to PWK BDAY Bash on March 9, 10, 11 and 12 in Hope, bring his crossovers and new replacement caps and we will get @Trey Cannon to do it for him, or even teach him how to do it. Which networks are they? Quote Link to comment Share on other sites More sharing options...
Tony Whitlow Posted February 22, 2022 Share Posted February 22, 2022 Or, have him come to PWK BDAY Bash on March 9, 10, 11 and 12 in Hope, bring his crossovers and new replacement caps and we will get [mention=2154]Trey Cannon[/mention] to do it for him, or even teach him how to do it. Which networks are they?Trey will probably tell you the caps are fine Sent from my iPhone using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
Mark Z Posted February 22, 2022 Share Posted February 22, 2022 I did new caps on my 1994 Chorus2's and 1985 Heresy's. I used Dayton Caps from Crites. Night and day difference on the Heresy's in high's and clarity. Chorus 2's were a bit brighter, but not nearly as pronounced as the Heresy's. The Heresy's were also much easier as they have the Type 2 hand wired crossover set vs the cramped printed circuit board on the Chorus 2's. LaScala's might have the hand wired set up too. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.