RickD Posted October 6, 2023 Share Posted October 6, 2023 My listening chair is approximately 13ft and centered on my modified Khorns. I've have a 17-18 foot ceiling in my living room and a stairway behind my chair. When I climb the stairs I notice an improvement in sound (detail) when my feet are even with the top of the recliner. Is there a way to bring that sweet spot down to normal listening height? I'm not complaining about the sound I have now but if there is a way to make it better. I am all ears. 1 Quote Link to comment Share on other sites More sharing options...
CWOReilly Posted October 6, 2023 Share Posted October 6, 2023 Maybe raise the rear of the speakers an inch or two? 1 Quote Link to comment Share on other sites More sharing options...
OO1 Posted October 6, 2023 Share Posted October 6, 2023 removing the top hat/collar will lower the mids horn / tweeter just enough to bring down the sweet spot Quote Link to comment Share on other sites More sharing options...
Ceptorman Posted October 6, 2023 Share Posted October 6, 2023 Sounds like you need to mount your chair on an altar! 1 Quote Link to comment Share on other sites More sharing options...
Shakeydeal Posted October 6, 2023 Share Posted October 6, 2023 It might not be the height, but the distance. Try to replicate the same height, but at your current sitting position. If it doesn’t sound the same as on the stairs you may just need to pull your chair back. 3 Quote Link to comment Share on other sites More sharing options...
JMeader Posted October 6, 2023 Share Posted October 6, 2023 Another area to look at is your room and speaker reflection points. I have La Scala's and in My Room raising the speakers off the floor improves my sound stage a noticeable amount. My room is 17 wide 22 long with a 14 ft rounded ceiling and I sit 14 feet away from my speakers which are 6 ft + seperated Suggestion get 4 rubber door stoppers and put them in the back of your speakers and see what happens Good Luck and Enjoy The Music 1 Quote Link to comment Share on other sites More sharing options...
billybob Posted October 6, 2023 Share Posted October 6, 2023 ... Quote Link to comment Share on other sites More sharing options...
OO1 Posted October 6, 2023 Share Posted October 6, 2023 khorns are 2 piece cabs , the top hat can be lifted on it's own 1 Quote Link to comment Share on other sites More sharing options...
RickD Posted October 6, 2023 Author Share Posted October 6, 2023 9 hours ago, CWOReilly said: Maybe raise the rear of the speakers an inch or two? I thought about that. I have hardwood floors so I could put a folded cloth in the rear an slide the speaker back in the corner. Quote Link to comment Share on other sites More sharing options...
RickD Posted October 6, 2023 Author Share Posted October 6, 2023 8 hours ago, Ceptorman said: Sounds like you need to mount your chair on an altar! Or buy an old style barber chair with the telescoping height adjustment. Quote Link to comment Share on other sites More sharing options...
RickD Posted October 6, 2023 Author Share Posted October 6, 2023 2 hours ago, OO1 said: khorns are 2 piece cabs , the top hat can be lifted on it's own Maybe the solution is to have a custom collar made of walnut that would tilt the top hat forward. 1 Quote Link to comment Share on other sites More sharing options...
Peter P. Posted October 6, 2023 Share Posted October 6, 2023 I say "no". There are too many factors regarding the room that affect the sound. Apparently the OP prefers the midrange and tweeter to be off-axis to their listening position. And it sounds like they have hardwood floors. Aiming the speakers toward the floor would produce different reflections. Pointing the top hat upward, providing the same off-axis sound, might work but would look weird. Carpeting the room might change the sound to your satisfaction, but I'd recommend experimenting with space rugs first. Of course that may not be an option for them aesthetically. You could elevate the entire Klipschorn to result in the same off-axis seating angle as standing on the stairs but again, that would be an eyesore to some. Quote Link to comment Share on other sites More sharing options...
RickD Posted October 6, 2023 Author Share Posted October 6, 2023 I'm wondering why the speakers sound better from above. My ceiling shape is / | (not to scale or pitch). So as I go up the stairs I have a vertical wall behind me and the sloped wall above the speaks. Quote Link to comment Share on other sites More sharing options...
CWOReilly Posted October 6, 2023 Share Posted October 6, 2023 19 minutes ago, RickD said: I'm wondering why the speakers sound better from above. My ceiling shape is / | (not to scale or pitch). So as I go up the stairs I have a vertical wall behind me and the sloped wall above the speaks. Could be the reflection from sloped wall. Quote Link to comment Share on other sites More sharing options...
RickD Posted October 6, 2023 Author Share Posted October 6, 2023 5 minutes ago, Peter P. said: I say "no". There are too many factors regarding the room that affect the sound. Apparently the OP prefers the midrange and tweeter to be off-axis to their listening position. And it sounds like they have hardwood floors. Aiming the speakers toward the floor would produce different reflections. Pointing the top hat upward, providing the same off-axis sound, might work but would look weird. Carpeting the room might change the sound to your satisfaction, but I'd recommend experimenting with space rugs first. Of course that may not be an option for them aesthetically. You could elevate the entire Klipschorn to result in the same off-axis seating angle as standing on the stairs but again, that would be an eyesore to some. I do have hardwood floors. I have a couple of black dogs so an area rug would only be temporary, It would look like garbage after a few weeks. I know because I spent a few hundred on a large circular rug and it didn't take long before I hauled it to the dump. Another unrelated problem I recently solved was when ever a dog or person walked across the living room I occasionally experienced a short burst of static through my system. I solved that problem by installing a eeros Pro + mesh network and plugging my streaming mini pc directly into one of the nodes that sits directly under the amp. No more static. That puzzled me for awhile because the person or dog would be in the middle of the room 8 or 9 feet away from system when the static occurred and not in direct line with the router which is upstairs. Quote Link to comment Share on other sites More sharing options...
RickD Posted October 6, 2023 Author Share Posted October 6, 2023 9 minutes ago, CWOReilly said: Could be the reflection from sloped wall. I don't think the top hat projects sound up. Could be the large Volti 2" mid range horn and BMS driver. if I recall the volti horn flairs out on all sides and overlaps frequency with the B&C tweeter. So sound would be directed upward from the mid horn. The tweeter also flares in all directions. Quote Link to comment Share on other sites More sharing options...
RickD Posted October 6, 2023 Author Share Posted October 6, 2023 The easiest solution is to sit on the stairs. It's noticeably better sound up high but it still sounds great when in my usual sitting position Quote Link to comment Share on other sites More sharing options...
OO1 Posted October 6, 2023 Share Posted October 6, 2023 43 minutes ago, RickD said: Maybe the solution is to have a custom collar made of walnut that would tilt the top hat forward. -as it is , the dispersion pattern of the top hat is above your chair , the solution is not to raise but to lower the Mids -HF section by 1-2 inches , effectively lowering the dispersion pattern to the level of your chair . try this , remove the collar , remove the top hat , place the horn + tweeter directly on top of the bass bin , is it better ? Quote Link to comment Share on other sites More sharing options...
RickD Posted October 6, 2023 Author Share Posted October 6, 2023 16 minutes ago, OO1 said: -as it is , the dispersion pattern of the top hat is above your chair , the solution is not to raise but to lower the Mids -HF section by 1-2 inches , effectively lowering the dispersion pattern to the level of your chair . try this , remove the collar , remove the top hat , place the horn + tweeter directly on top of the bass bin , is it better ? I assuming that the collar is the wood spacer between the bass bin and the top hat. I would say that my eye level is even with the collar or close to it. I can't remove the mid-horn because it is integrated into the grill frame. The tweeter sits to the side of the mid horn. The best I can do would be to lower the top hat by removing the collar which I think has been done on their current Khorns. Another possibility is to put the top hat on a table next to the bass bin. I like nice sound but I think that would be taking it to the extreme. After I get done with my million other project I may experiment a little with this issue. Quote Link to comment Share on other sites More sharing options...
OO1 Posted October 6, 2023 Share Posted October 6, 2023 ok Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.