Leaderboard

Manowar - Defender Tora Tora - Phantom Rider MaelStrom - Step One * This whole album is nice. Found it in California after I spent some time in Hawaii. MY sister-in-law and I took in a bit at wine country and while at a music store I got this cassette and a DUNE Laserdisc for my brother. Eviction - Living in Emptiness Forbidden - Through Eyes of Glass

Great tune @Tim Sr.. The majority of people think of Foxy Lady or another great song and totally forget about the message Jimi was truly sending to the people. There was almost always a guitar within reach and he played them all depending on his mood. People should have heard him play the blues. Prolly not much of that out there. I never looked. Insanely good. No guitar he was spinning something.

Focus today is getting one of the R2R's back up n running... for now. Little mood encouragement today

The first crossover is back in place and this one will be reinstalled in a few minutes. Then I'll listen to some tunes.

Deadwax Side 1 T2 P AL 33453-4R Side 2 P BL 33453-4A

saw an ad in fb selling a set of drums described as not banged up I thought that was what you did to drums. ???

Yes to this. I have had the HII and that is all correct. I remembered that Bruce had the square cups and I had the round terminal cups, which we thought was strange. A few weeks ago, I found out that the round cups were the 4 Ohm. I have some H 1.5(?) that have the plastic K701 with K53 drivers that are mounted inside. The horns have the crescent cut for the woofer, just like for the HII. I just now bought some H 1.5(?) that had the cast metal K700 horn with the K53 driver. I had it out for the swap, and then Mookie pointed out the threaded-to-flat adapter. His H1 had the K700 with the K55 and my H1.5 had the K700 with the K53 driver. I'm not sure why this is, maybe Klipsch was trying to use the in-stock parts, which was smart.

Today I got water hydrojet massages on a waterbed, I swam and walked a lot .Tomorrow I get a @dirtmudd pack and electrical stimulation against the pain points in my back, I'm curious. The food is now really good, a large selection of menus and salads and non-alcoholic drinks. In general, the days go by very quickly, I've already been here for 5 days. The daily routine is determined by sporting activities, targeted individual medical treatments and information about solutions to health problems. It really is a good clinic, it has repeatedly received awards in recent years as one of the top clinics for orthopaedic treatment

They are '89, wih rectangular terminal cups. A bit of a pain, but came up with a way to finish the second one more easily. They sound great!! Will see after a couple of days. Thanks to Dean for the caps! Super appreciate the help.

Snake Eyes. Scott 299A, 22 years post NOSValves restoration. Other than biasing occasionally, nothing has been done to it. Did some "tube rolling" once to see if I was an "audiophile"...couldn't tell a difference so still just a guy that likes music. Feeding Forte IIs. Nothing to compare it to, it's all I've used since around 2002-2003.

WOW!

just listening , btw ....3 sat is a german-austrian-swiss community tv channel

Well, I haven´t seen the car at all , just long legs 😍

a real timeless dreamcar 😍 the most beautiful cabrio ever made by BMW

A few photos of a tube amp project completed recently. Two channels, about 20WRMS/ch into 8Ohms. Based somewhat on the Scott 299C output stage but using a solid-state, HV power supply design capable of substantially more power than is required for the push-pull 7591 pairs. Chassis CAD files were sent out for quote, the supplier (New England based) responded with pricing for larger quantities than I was considering. Placed an order for a small lot of chassis assemblies. All metal chassis assemblies are best for RFI/EMI/noise immunity. The chassis assembly is the high-cost item in the build. Uses oversized Hammond or Lundahl output transformers. Still waiting on a few finishing touches (knobs, graphics). Was considering silk screening the top plate but perhaps some other time.

And placed about 8 tons of DG..made a path from upper to lower level.

$1275 and $5 shipping? Am I missing something? 😂

This is crazy, never realized so many iterations of H1.5. Mine are same as H1 save K53, K52 plastic midrange horn. The cabinet is all plywood with the floating thinner 5/8" plywood back. The crossover is E-2 internal on a board. The K53, K52 plastic midrange horn is rear mounted.

more Art...

Yes, both of them.

I watched the Rugby match too. Scrap the NFL and put Rugby in its place.

Glad you got a copy, 65 €? OUCH! yeah.. I had no idea it was up to this price... I can understand why though.

I would be playing Vinyl, or R2R but I have to concede to the time it will take to get things back together. Making major moves of ones system, just takes....time. I just have to stick with it and be able to realize "Some form of" the joy of the completed system. Until then... YouTube! or other Flac and the what nots.

Got the pavers finished

Got the path from driveway to man gate finished

By golly I think you might make it afterall. You're surrounded by all kinds of valuable information that will help you immensely physically and mentally. Take advantage of it and apply as needed. Getting older is crazy. I've not got both my girls on my case about eating better and doing something physical. Diabetes sucks. Cut out 90% of fast food about a year ago and cooking smarter at home. Slowly replacing diet soda w/water and listening to my youngest jockette. She drinks a gallon of water EVERY day. She's got her routine and does it daily. Hot yoga, whatever that is, and runs a couple miles daily coupled with scripture & motivational readings. Now she's getting the oldest dialed in. She's lost 30 pounds and watches everything she eats. Now she has the kids doing it. Crazy! I'm out numbered. Got my water jug sittin here though. Sunny and about 73 this afternoon. Strange weather for sure here in Duckburg.

Hmmm, I thought the round cup was on the Heresy 1.5, when they got all the parts switched out. No more k55, etc.

Laptop → Dac → Preamp → Amps → Speakers ↓ Mini DSP → Powered Subs

This is very helpfu, @Natertotts - thank you so much, really appreciate you taking the time to write these suggestions.

I bought it allready , was available on vinyl as well but 65 € is too much ! I´m glad that I have this excellent music

I of course can not say to the CD or other media except the vinyl, which is one of the smoothest recordings I own. Got this back in the mid 70's on a fluke, and just loved it from the get-go. It is one of the few vinyl pressings I use for testing and evaluation of sound. @MicroMaraGlad you liked it

@grasshopper is it this ? Quiet impressive

I really like this, kind of a teaching session of Molly Tittle and Tommy Emmanuel. Amazing to hear them talk about the styles they use and hear examples.

Molly T. doing the Stones - She's a Rainbow

Just hope you can get that thing outta there @JohnJ The sooner the better! All quiet in Duckburg. 45 today and 65 on Sunday? Pffft Crazy but normal. Wiped out a mushroom, cheese ommelettemouse earlier. Added a lil Atomic Rooster from @oldtimer. Not bad at all. Carry on!

So, after thinking about it, speaking with the folks at Klipsch and taking in all of the great advice from all of you, here is what I think that I am doing. I'm probably going with the Heresy IV'S. If for some reason I feel that they need more bottom end I'll pick up a Rel HT/1510 at some point. This also gives me the opportunity later on to move the entire setup into my 20X20 spare bedroom/studio in order to grab something higher end and a set of Cornwalls for the living room. Who knows, maybe at that point I'll do something ridiculous and go larger than the Cornwalls.

I hope your still enjoying you Velodyne F1500R. I ran a cross a F1800R and it hits levels you wold not believe!! Link (great guy!) on this Forum sold me 2 of his KG 5.5s to go with the other ones I had and it's better then the theater!!! AL.

Any thoughts on this one (link)..... http://www.avtechsolutions.com/he_vstv1100.htm AL.

Bruce, thanks for your follow up! How much is the system that you would recommend? AL.

Bruce, thanks for your follow up! As far as $$$$, some thing reasonable under $200.00. I have seen the devices boost the signal for A/V cable going over 100 feet. I thought about going that route but blowing anothe hole in a concrete block foundation in some thing I'm trying to avoid. The signal only needs to go 30 feet, AL.

I have a set on KG-5.5 towers and they have a pointed fine mesh cover in the middle of the Tractrix horn, do all the K-85-K horns have this fine mesh cover? What is it for? I looking into buying a extra set of K-85-K horns and did not see this cover on them, can I buy this or is this something that Klipsch dropped? AL.

Excellent! Thanks for your follw up! Were you happy with the product? Did you see my Cerwin Vega! HED? I'm lookin in recovering the grills again and found this.......

On the pictures, wiil do! Sorry for the long post but getting the 4 back together was a challange, AL.

Her it goes, see if it works, AL.

Wow!! two 18" drivers and over 1200 Watts?? I have Velodyne F-1800R with one 18" and will break windows. The one listed looks like a well built unit and know it would be over kill, AL.

Thanks for your follow up! I think the KLF-C7 would be a perfect match to the KG 5.5/KG 1.5 that I currently have. I will be selling the RC-35 I have now because it doesn't match the sound of the KGs. Let me know all the details on the KLF-C7 as far as condition when it's available and what you would like for it. I think the KLF-C7 would be a better match then the Acadamy series, let me know, AL.