Chief bonehead

Attached are the 402 with ls and 402 with jub lf LS AND K-402-hf with k-691.docx KPT-KHJ-KF AND K-402-hf with k-691.docx

Dave. Send me a pm

It advisable.

Exactly Deano. 75 cent.

It was demeaning. That’s why I hid it. And if you don’t understand that, then that’s your problem.

Lol. Interesting that you know what the tone of my voice is in a typed message. But I guess I can’t help it, so I’m going to. Lousy prep.

Because there was two of these left, the price was raised. Not hard to understand. Sorry to hear that you are no longer interested.

Do you have the settings for this combo? I can’t seem to find it.

Correct. You have haven’t said either way. But some of the boneheads here just seem to be a little cranky and I can certainly take care of that. You might want to clean the diaphragms. Anything between the diaphragm and phase plug may buzz. and if you do want to replace the diaphragms, klipsch does offer titanium diaphragms as replacements.

Interesting…

Using two la scala bass bin does extend the low end because the mouths couple. And if you want to extend the horn loaded low end……kpt-1802.

Congratulations Michael!!!!

And for those of you that would rather not use gofundme and would rather send a check, please pm me and I can provide the address to mail the check. Thanks.

Well….I don’t model. I use actual curves and responses in my programs and designs. I have all the cool toys….

Links to buy tickets for the concerts at the pwk birthday bash. Press Release March Event.docx Links for the two, ticketed events: March 10 – Birthday Bash – “All That Jazz” Dinner on the Lawn, Silent Auction, & Jazz Trio Event Page: (Registration link at top as well) https://klipschmuseum.app.neoncrm.com/event.jsp?event=30& Registration Page: https://klipschmuseum.app.neoncrm.com/eventReg.jsp?event=30& March 11 – Music in the Evening at Klipsch Municipal Auditorium Event Page: (Registration link at top as well) https://klipschmuseum.app.neoncrm.com/event.jsp?event=35& Registration Page: https://klipschmuseum.app.neoncrm.com/eventReg.jsp?event=35&

Hmmm…..that’s not consistent with my tests. Because you have drivers and their accomplices acting together, they will have their own phase response. Time arrivals will let you zero in on when max energy is occurring. But you must have narrow bandwidth around the crossover point to even closer. but even that will not tell you where in period of that specific wavelength you are at because of the particular phase data of that acoustic device. Furthering tuning is needed and that can be define by an etc over a narrowband wide around the crossover point. AND max addition at crossover point.

Oh I see. Different animals. I only deal with getting two or more sections to get them not only time aligned but “period” aligned to that the amplitudes at crossover add up to the proverbial 6 db while eliminating as much interference at crossover.

If you measure the freq response, does that jive with the test?

Exactly.

What’s “large”? Just curious.

Sounds ok

My blind tests proved otherwise.

He did but then data and listening changed his mind. His friend Richard hyser changed his mind.

One

Bro. You got to do anything you can to not go around replacing bulbs. Well done…..