Pete H Posted December 2, 2019 Author Share Posted December 2, 2019 Lets have @rockhound, get the details on everything first and figure out the needs. As long as we have a couple dedicated 20 amp circuits and the proper size cords ( I have quite a few), I'm sure we'll be able to work with it. Quote Link to comment Share on other sites More sharing options...
Dave A Posted December 2, 2019 Share Posted December 2, 2019 1 minute ago, Thaddeus Smith said: The Great Pilgrimage Revival OK tell me how it used to be. Quote Link to comment Share on other sites More sharing options...
Thaddeus Smith Posted December 2, 2019 Share Posted December 2, 2019 2 minutes ago, Dave A said: OK tell me how it used to be. An extension cord from the laundry room out to the grassy area on the other side of the pool. In the conference/ballroom there were plenty of outlets for some power strips, etc. We're not talking big stacks like at Rodney's. Maybe some Heresy's or similar sized pro variants. Cornwalls if someone is feeling froggy. I'm fairly confident that it won't hamper the event whatsoever. Quote Link to comment Share on other sites More sharing options...
Dave A Posted December 2, 2019 Share Posted December 2, 2019 Ah no that is not quite true if I show up. 1 1 Quote Link to comment Share on other sites More sharing options...
CECAA850 Posted December 2, 2019 Share Posted December 2, 2019 19 minutes ago, Dave A said: That could be a big problem Carl. How long is long and what do they have to hook up to? Pretty much all you'll find there are conventional wall outlets. I'd be surprised if they were 20A. Quote Link to comment Share on other sites More sharing options...
Thaddeus Smith Posted December 2, 2019 Share Posted December 2, 2019 8 minutes ago, Dave A said: OK tell me how it used to be. 2 minutes ago, Dave A said: Ah no that is not quite true if I show up. Well what am I answering then? Quote Link to comment Share on other sites More sharing options...
Dave A Posted December 2, 2019 Share Posted December 2, 2019 Well in my shop I have run everything off a 20 amp outlet. But it is an honest 20 amp and that 20 amp breaker is dedicated to that four way only. I have not tripped the breaker yet but it also does not compete with other things for juice. Quote Link to comment Share on other sites More sharing options...
Dave A Posted December 2, 2019 Share Posted December 2, 2019 2 minutes ago, Thaddeus Smith said: Well what am I answering then? Both of them in which ever order you please. Quote Link to comment Share on other sites More sharing options...
billybob Posted December 2, 2019 Share Posted December 2, 2019 Mallette was there a fewyears ago Cannot recall how he did it but, he was outside as recall from photos posted at the time. Inside may be more viable but, weather should plan for both anyway. Dave had a good power cord. Quote Link to comment Share on other sites More sharing options...
Pete H Posted December 2, 2019 Author Share Posted December 2, 2019 Depending on where we're pulling power from for an outside rig, I'm quite certain that we can get some 20 amp circuits as that's a commercial structure and even though it's not new, I'm sure it was code to run minimum #12 wire for all there runs and especially in the laundry facility where there would be dedicated circuits for individual appliances. I'll bring the electrical box just in case, but lets get the information first so there's no surprises. Quote Link to comment Share on other sites More sharing options...
CECAA850 Posted December 2, 2019 Share Posted December 2, 2019 1 minute ago, billybob said: Mallette was there a fewyears ago Cannot recall how he did it but, he was outside as recall from photos posted at the time. Inside may be more viable but, weather should plan for both anyway. Dave had a good power cord. It was my system in the outside picture. I was using a 150 wpc ATI with KP-301 II's. There wasn't any power where we were so we ran a cord from the laundry room, across the pool cover over to where we eventually set up. 1 Quote Link to comment Share on other sites More sharing options...
CECAA850 Posted December 2, 2019 Share Posted December 2, 2019 Where's @MenloBob? I'd love to hear his 510 creations. Quote Link to comment Share on other sites More sharing options...
Dave A Posted December 2, 2019 Share Posted December 2, 2019 Well my Super MWM's are running off two Crown xli800 amps and to be honest the amps are turned half way up and I have never approached full volume on my PC controls inside my shop. I have no idea how loud they would be if I did and they are not thirsty for sure. The other gear I would bring would be as efficient so gobs of power would not be needed. Quote Link to comment Share on other sites More sharing options...
Thaddeus Smith Posted December 2, 2019 Share Posted December 2, 2019 Pretty sure my female counterpart will be there as well, if we can figure out logistics for farm and kids. I told her it was a scaled back event and all she heard was "sexy weekend away without kids, and oh btw booze and music and other folks from the forum." 1 Quote Link to comment Share on other sites More sharing options...
CECAA850 Posted December 2, 2019 Share Posted December 2, 2019 25 minutes ago, Thaddeus Smith said: sexy weekend away You didn't mention the Super 8 I take it. Quote Link to comment Share on other sites More sharing options...
Pete H Posted December 2, 2019 Author Share Posted December 2, 2019 I did send an inquiry to Hempstead Hall to check $$ and availability. It's at the U of A Hope campus. They have some big conference rooms and it's in Hope. Quote Link to comment Share on other sites More sharing options...
babadono Posted December 2, 2019 Share Posted December 2, 2019 1 hour ago, Pete H said: "Southern Midwest Audio Gathering" It's all good Pete, I was replying to the Dude more than anything. 1 Quote Link to comment Share on other sites More sharing options...
Pete H Posted December 2, 2019 Author Share Posted December 2, 2019 1 minute ago, babadono said: It's all good Pete, I was replying to the Dude more than anything. It would be all better if you're coming! Quote Link to comment Share on other sites More sharing options...
Pete H Posted December 2, 2019 Author Share Posted December 2, 2019 https://www.hopearkansas.net/pView.aspx?id=6507&catid=583 Klipsch auditorium available to non-profits for $100 per day. Being a forum group, might even get a discount? FYI, it's 1000 miles for me and I'm bringing gear so no complaints about how far it is. I was pulling for Bardstown KY so I could go back to Buffalo Trace Quote Link to comment Share on other sites More sharing options...
CECAA850 Posted December 2, 2019 Share Posted December 2, 2019 The community center linked on that page might be an option also. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.