glens Posted January 17, 2020 Posted January 17, 2020 Are you saying you treated the inductors and voice coils with that "contact enhancer"? I ask because they have an enamel coating (insulation), yet it seems as though that's what you'd said you did (and reported a difference in sound?). I'm curious now about that product, and if perhaps you're related in any way to the family name Medwin. 3 Quote
billybob Posted January 17, 2020 Posted January 17, 2020 Rather enjoying your thread here. Welcome some more... 1 1 Quote
babadono Posted January 17, 2020 Posted January 17, 2020 Interesting. You may enjoy @Youthman 's rebuld of the crossover: Or is it @Deang's rebuild of youthman's crossovers? Quote
CECAA850 Posted January 17, 2020 Posted January 17, 2020 1 minute ago, Randyh said: he cleaned all the boards , the copper coils and the contacts of all the resistors and the capacitors with the NASA Contact Enhancer. that stuff is somewhat similar to DEOXIT , if I am not wrong here - I was under the impression that it's made to be applied to contacts that open and close like a relay. That's why I'm confused. Well......one of the reasons I'm confused. 1 1 Quote
glens Posted January 17, 2020 Posted January 17, 2020 I'm a little more confused than that, for additional reasons, I suppose. 1 1 Quote
billybob Posted January 17, 2020 Posted January 17, 2020 Like fine wine, it takes time. Abit of intrique whether called for or not, we shall see... Quote
MicroMara Posted January 17, 2020 Author Posted January 17, 2020 7 hours ago, babadono said: Interesting. You may enjoy @Youthman 's rebuld of the crossover: Or is it @Deang's rebuild of youthman's crossovers? Hello Babadono, I already know Youthman and DeanG from the community, but have never had any contact with them. I'm curious if and when they will notice my thread ... Thanks and regards 1 Quote
MicroMara Posted January 17, 2020 Author Posted January 17, 2020 7 hours ago, Randyh said: he cleaned all the boards , the copper coils and the contacts of all the resistors and the capacitors with the NASA Contact Enhancer. that stuff is somewhat similar to DEOXIT , if I am not wrong here - Hello Randyh 🙂 It is not a deoxite ... I do not know the chemical composition of the fluid, but my wife is a qualified chemist by profession and comes from physical chemistry, so the use of chemical fluids to optimize the flow of electrons in copper structures is not a voodoo for her. These fluids are used in many technical areas today ... Thanks and regards 1 Quote
MicroMara Posted January 17, 2020 Author Posted January 17, 2020 8 hours ago, glens said: I'm a little more confused than that, for additional reasons, I suppose. Hello Glens, what exactly makes you confused? Thanks and regards 1 Quote
MicroMara Posted January 17, 2020 Author Posted January 17, 2020 8 hours ago, billybob said: Rather enjoying your thread here. Welcome some more... Hello Billybob 🙂 I've only been in the community for a good 30 hours. Actually I thought that my thread would hardly interest a person ..... I think I was probably wrong ... Thanks and regards 2 Quote
MicroMara Posted January 17, 2020 Author Posted January 17, 2020 8 hours ago, CECAA850 said: I was under the impression that it's made to be applied to contacts that open and close like a relay. That's why I'm confused. Well......one of the reasons I'm confused. Hello CECAA850 🙂 what confuses exactly, I try to answer all ambiguities ... but I'm not a physicist. Everything I modify with the RF 7 MK II is based on my personal experience, well over 40 years in private use. I am not (yet) doing this professionally, but would be an option ... 1 Quote
MicroMara Posted January 17, 2020 Author Posted January 17, 2020 8 hours ago, billybob said: Like fine wine, it takes time. Abit of intrique whether called for or not, we shall see... If you mean the fluidum (?) You are right .... The fluidum works only through electricity. And of course .... a good wine always takes time and this thread too .... Thanks and regards 2 Quote
MicroMara Posted January 17, 2020 Author Posted January 17, 2020 8 hours ago, billybob said: Like fine wine, it takes time. Abit of intrique whether called for or not, we shall see... If you mean the fluidum (?) You are right .... The fluidum works only through electricity. And of course .... a good wine always takes time and this thread too .... Thanks and regards 1 Quote
polizzio Posted January 17, 2020 Posted January 17, 2020 9 hours ago, glens said: I'm curious now about that product, and if perhaps you're related in any way to the family name Medwin. My thoughts exactly. Welcome to the forum, MicroMara. Quote
CECAA850 Posted January 17, 2020 Posted January 17, 2020 2 hours ago, MicroMara said: Hello CECAA850 🙂 what confuses exactly, I try to answer all ambiguities ... I stated what confused me. What contacts in the crossover does this fluid improve? Quote
CECAA850 Posted January 17, 2020 Posted January 17, 2020 16 hours ago, MicroMara said: ..This application has massively improved the step response and the pulse speed of the chassis. This was measured? Quote
polizzio Posted January 17, 2020 Posted January 17, 2020 4 hours ago, MicroMara said: Hello Randyh 🙂 It is not a deoxite ... I do not know the chemical composition of the fluid, but my wife is a qualified chemist by profession and comes from physical chemistry, so the use of chemical fluids to optimize the flow of electrons in copper structures is not a voodoo for her. These fluids are used in many technical areas today ... Thanks and regards This cannot be for real. Optimizing the flow of electrons in copper structures (inductors) with NASA Contact Enhancer? Huh? Somebody's yanking our chain for fun, right? 1 Quote
CECAA850 Posted January 17, 2020 Posted January 17, 2020 15 minutes ago, polizzio said: Somebody's yanking our chain for fun, right? Sadly I think not. 1 Quote
babadono Posted January 17, 2020 Posted January 17, 2020 If it is used by NASA there should be data, like an MSDS report. The government runs on paperwork. Please post the name and a link to this fluid you are using. Thank you. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.