gnatnoop Posted May 12, 2011 Share Posted May 12, 2011 That gloss black will show every speck of dust. It will be a constant headache. You better sell them (to me, of course). funny but true! however, a $4 swiffer works wonders! Quote Link to comment Share on other sites More sharing options...
SWL Posted May 13, 2011 Share Posted May 13, 2011 A good cleaning every so often with Caig Deoxit and pipe cleaners is a good idea. I do the deoxit and a brass wire brush on the tube pins every so often......but as far as the sockets go, is it ok to just shoot the deoxit directly into it? I've never done it, didn't want to get too carried away but I'm assuming that if I did that I would let it sit for a considerable amount of time before powering it back up? ...still a tube newbie. [:$] Quote Link to comment Share on other sites More sharing options...
tube fanatic Posted May 13, 2011 Share Posted May 13, 2011 A good cleaning every so often with Caig Deoxit and pipe cleaners is a good idea. I do the deoxit and a brass wire brush on the tube pins every so often......but as far as the sockets go, is it ok to just shoot the deoxit directly into it? I've never done it, didn't want to get too carried away but I'm assuming that if I did that I would let it sit for a considerable amount of time before powering it back up? ...still a tube newbie. The propellant in the aerosol deoxit evaporates rather quickly. However, using that method isn't suitable for the sockets as it's impossible to get only a minimal amount in there. You don't want to saturate the socket pins as it can drip through the bottom and make things a bit messy underneath. Applying a thin coating of deoxit to the tube pins using the deoxit wipes is the best method. Alternatively, you can get the deoxit in a bottle with an applicator brush and simply brush on a tiny amount. A slight coating is all that is needed to improve the metal to metal contact. Quote Link to comment Share on other sites More sharing options...
SWL Posted May 13, 2011 Share Posted May 13, 2011 Actually, the procedure I was doing: 1. Brass wire brush the tube pins. 2. Spray minimal deoxit on the pins. 3. Brass wire brush pins while still moist. 4. Shoot pins with compressed air then pop tubes back in the amp. Is this kosher or detrimental in any way? Quote Link to comment Share on other sites More sharing options...
tube fanatic Posted May 13, 2011 Share Posted May 13, 2011 Actually, the procedure I was doing: 1. Brass wire brush the tube pins. 2. Spray minimal deoxit on the pins. 3. Brass wire brush pins while still moist. 4. Shoot pins with compressed air then pop tubes back in the amp. Is this kosher or detrimental in any way? Not detrimental, but overkill unless you are doing it on NOS tubes which have been stored in a damp environment and are showing significant corrosion/oxidation on the pins. Even there, using your procedure initially only, and following with a once or twice/year wipe would be sufficient. Quote Link to comment Share on other sites More sharing options...
SWL Posted May 13, 2011 Share Posted May 13, 2011 Thanks tube fanatic. [] Quote Link to comment Share on other sites More sharing options...
Audible Nectar Posted May 14, 2011 Share Posted May 14, 2011 Wow that's more wpc than I would have gussed, that much tube power could make any Klipsch jump, very nice. They DO make the Heritage "jump" - but it's the CONTROL, delicacy, and authority the VRDs exhibit that really set them apart. They really are the "do it all" amplifier for Heritage.....40+ hours a week for three years and I never ever get tired of using them. As much as I love my MC30 based system, the VRDs are (like the Cornwalls being "speaker of the house") - amplifiers of the house. The more I have and use them, the more they justify ownership. Quote Link to comment Share on other sites More sharing options...
gnatnoop Posted May 14, 2011 Share Posted May 14, 2011 audible nectar > The more I have and use them, the more they justify ownership. feel the same way. even at low listening levels they amaze... Quote Link to comment Share on other sites More sharing options...
SWL Posted May 14, 2011 Share Posted May 14, 2011 even at low listening levels they amazeThe sign of a good system. [] Quote Link to comment Share on other sites More sharing options...
greg928gts Posted May 14, 2011 Share Posted May 14, 2011 even at low listening levels they amazeThe sign of a good system. That is so true! Nice looking amps Michael, I'm sure they're going to make the Belle's really sing. Greg Quote Link to comment Share on other sites More sharing options...
USNRET Posted June 3, 2011 Author Share Posted June 3, 2011 Well it's been a minute or two but the ex truck just dropped off amp #2. Let's see if it survived this trip. The original delivery was a little rough on one amp so it was back to Craig for some surgery. The patient recovered well but the Dr's orders are they they must exercise all night tonight to limber up the nos tublings. The household has been warned not to bother daddy tonight. Quote Link to comment Share on other sites More sharing options...
joessportster Posted June 3, 2011 Share Posted June 3, 2011 Wow to bad ups damaged the twins. I quit using UPS they seem to be the worst of all the carriers. Joe Quote Link to comment Share on other sites More sharing options...
USNRET Posted June 3, 2011 Author Share Posted June 3, 2011 Wow to bad ups damaged the twins. I quit using UPS they seem to be the worst of all the carriers. JoeFair is fair, I mis-spoke on the previous post. It wasn't UPS it was the other guys. Quote Link to comment Share on other sites More sharing options...
seti Posted June 3, 2011 Share Posted June 3, 2011 Does anyone remember the study that was done between the shipping companies? I wish I could find the article because they shipped electronics that measured number of drops bumps and shocks. The findings were interesting. If you wanted your package to stand the best chance of making it through without damage do not put fragile or handle with care stickers on your package. This increased your chances of drops and damage. Quote Link to comment Share on other sites More sharing options...
Marvel Posted June 3, 2011 Share Posted June 3, 2011 I ordered a piece of gear from a musician's website. The tape around the box was printed with: Delicate Electronic Equipment - Please Toss Underhand Bruce Quote Link to comment Share on other sites More sharing options...
USNRET Posted June 3, 2011 Author Share Posted June 3, 2011 We use these at work: http://www.shockwatch.com/shipping_handling_monitors/impact_indicator/index.php Quote Link to comment Share on other sites More sharing options...
USNRET Posted June 5, 2011 Author Share Posted June 5, 2011 All working just perfectly now! Quote Link to comment Share on other sites More sharing options...
NOSValves Posted June 7, 2011 Share Posted June 7, 2011 Nioce looking setup! You have a PM Quote Link to comment Share on other sites More sharing options...
tillmbil Posted June 7, 2011 Share Posted June 7, 2011 Waht is on shelf number two from the top? Almost looks like another VRD Quote Link to comment Share on other sites More sharing options...
garymd Posted June 7, 2011 Share Posted June 7, 2011 Waht is on shelf number two from the top? Almost looks like another VRD I'm guessing a phono-pre. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.