TJman Posted November 6, 2020 Share Posted November 6, 2020 (edited) First post here! I recently picked up a pair of black lacquer Cornwall II's from 1987. I wasn't thrilled with the factory black and decided to strip the black using Citri strip and then sand down the remaining paint to refinish the veneer underneath the paint using Tung Oil. My question is.... What kind of veneer is this? It currently has one coat of Tung oil on it so far. I will include a few different pics of the process from start to finish. Let me know what you think! I have multiple pics, will need to upload one at a time. Edited November 6, 2020 by TJman 2 Quote Link to comment Share on other sites More sharing options...
Moderators Travis In Austin Posted November 6, 2020 Moderators Share Posted November 6, 2020 They normally finish ash with black don't they? @HDBRbuilder is the man who would know. Quote Link to comment Share on other sites More sharing options...
TJman Posted November 6, 2020 Author Share Posted November 6, 2020 From my understanding, they painted over many different types of veneers, especially on older speakers. Typically they would paint over any veneer that they determined had some sort of imperfection and then sell them as black speakers. Quote Link to comment Share on other sites More sharing options...
TJman Posted November 6, 2020 Author Share Posted November 6, 2020 How they originally looked. Quote Link to comment Share on other sites More sharing options...
Skelt Posted November 6, 2020 Share Posted November 6, 2020 53 minutes ago, TJman said: First post here! I recently picked up a pair of black lacquer Cornwall II's from 1987. I wasn't thrilled with the factory black and decided to strip the black using Citri strip and then sand down the remaining paint to refinish the veneer underneath the paint using Tung Oil. My question is.... What kind of veneer is this? It currently has one coat of Tung oil on it so far. I will include a few different pics of the process from start to finish. Let me know what you think! I have multiple pics, will need to upload one at a time. Birch 1 Quote Link to comment Share on other sites More sharing options...
OO1 Posted November 6, 2020 Share Posted November 6, 2020 1 hour ago, TJman said: What kind of veneer is this? second that ----if the speaker has not been painted , it would have been titled -RAW BIRCH ----klipsch used plywood with a birch veneer 1 Quote Link to comment Share on other sites More sharing options...
moray james Posted November 6, 2020 Share Posted November 6, 2020 1 hour ago, TJman said: First post here! I recently picked up a pair of black lacquer Cornwall II's from 1987. I wasn't thrilled with the factory black and decided to strip the black using Citri strip and then sand down the remaining paint to refinish the veneer underneath the paint using Tung Oil. My question is.... What kind of veneer is this? It currently has one coat of Tung oil on it so far. I will include a few different pics of the process from start to finish. Let me know what you think! I have multiple pics, will need to upload one at a time. what you have there is Birch and it looks lovely especially as it has only one coat of oil. nice job. 2 Quote Link to comment Share on other sites More sharing options...
Peter P. Posted November 6, 2020 Share Posted November 6, 2020 How did you manage to get the paint out of the wood grain? Usually, after stripping, some paint remains in the grain that even sanding can't reach, without risk of sanding through the veneer. Quote Link to comment Share on other sites More sharing options...
OO1 Posted November 6, 2020 Share Posted November 6, 2020 you use steel wool and a bit of stripper with long strokes ------ 1 Quote Link to comment Share on other sites More sharing options...
TJman Posted November 6, 2020 Author Share Posted November 6, 2020 I did not use steel wool. Sounds like I have birch veneer here! The grain on this veneer is not deep at all, so it wasn't difficult to sand it down past the paint. i used a fine sandpaper. I believe 320 grit, then moved to a 400 grit before applying tung oil. You can see in this picture (bottom side of the cabinet up) that i was experimenting with using tung oil as the finish on the bottom. I found that the veneer was reasonably thick on this speaker so sanding it down (gently and gradually) was not an issue and did not lead to any wearing of the veneer around the edges or anywhere else. Again, I was very gentle and used super fine sandpaper to do this. The side of the cabinet in this pic was stripped using citristrip but not yet sanded. Quote Link to comment Share on other sites More sharing options...
jcn3 Posted November 6, 2020 Share Posted November 6, 2020 @TJman - that really is fantastic work. Congratulations! Look forward to seeing the finished pair. Quote Link to comment Share on other sites More sharing options...
Pondoro Posted November 6, 2020 Share Posted November 6, 2020 You got some nice birch, most of the time it has less interesting grain. Birch can be pretty "blah", yours has a bit of curviness. Quote Link to comment Share on other sites More sharing options...
jorjen Posted November 6, 2020 Share Posted November 6, 2020 Birch but no butt joints like a CBR. interesting. Quote Link to comment Share on other sites More sharing options...
TJman Posted January 10, 2021 Author Share Posted January 10, 2021 Hello all! I wanted to update this post with the finished product! These were originally black CWII's! After stripping all the paint and lightly sanding I applied 5 coats of Watco Tung Oil to the birch veneer. I then built risers for them and replaced the original black grills with Cane grill cloth from Crites and also applied a new Klipsch Cornwall Script logo. Overall, I am very pleased with the outcome, and the wife loves them almost more than the CWIII's next to them! I will try to post a couple of pics but can only post one at a time. 4 Quote Link to comment Share on other sites More sharing options...
Fido Posted January 10, 2021 Share Posted January 10, 2021 that looks great! Beautiful Quote Link to comment Share on other sites More sharing options...
Toz Posted January 13, 2021 Share Posted January 13, 2021 Nice work! I would be interested in your thoughts on how they sound and compare to your other Cornwalls. Quote Link to comment Share on other sites More sharing options...
OO1 Posted January 13, 2021 Share Posted January 13, 2021 On 11/5/2020 at 11:51 PM, jorjen said: Birch but no butt joints like a CBR. interesting. MDF panels with a Birch veneer Quote Link to comment Share on other sites More sharing options...
OO1 Posted January 13, 2021 Share Posted January 13, 2021 On 1/10/2021 at 6:29 PM, TJman said: Hello all! I wanted to update this post with the finished product! These were originally black CWII's! After stripping all the paint and lightly sanding I applied 5 coats of Watco Tung Oil to the birch veneer. I then built risers for them and replaced the original black grills with Cane grill cloth from Crites and also applied a new Klipsch Cornwall Script logo. Overall, I am very pleased with the outcome, and the wife loves them almost more than the CWIII's next to them! I will try to post a couple of pics but can only post one at a time. how many hours in total was needed for stripping and sanding , did you leave the Front-back and lower panel black - grilles are usually the hardest part,, and they look perfect - Quote Link to comment Share on other sites More sharing options...
jorjen Posted January 14, 2021 Share Posted January 14, 2021 8 hours ago, RandyH000 said: MDF panels with a Birch veneer MDF in 1987? Ummmm........NO! Quote Link to comment Share on other sites More sharing options...
jimjimbo Posted January 14, 2021 Share Posted January 14, 2021 and another excellent example. Good Show! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.