babadono

What?👂 Merry Christmas to one and all

Are these the mini-me horns that @ClaudeJ1 used to rave about?

Yes Sir

Here they are:

is this close enough? https://www.mouser.com/ProductDetail/Switchcraft/PJRAS1X2S02AUX?qs=mcPJWgAPNrf54bk5GcnDZQ%3D%3D&mgh=1&gad_source=1&gclid=EAIaIQobChMIjL-_i4-hgwMVXi-tBh0AIwGHEAQYBiABEgJGXPD_BwE Personally I would get rid of the PCB mount type. Get a standard panel mount type and add an inch of wire. It is the force transferred on the connector down to the PCB that breaks connections and cracks traces on circuit boards On the right the standard PCB mount jacks have been replaced with standard panel mount type. This is the main in and out connections. On the left are the PCB type that is the tape monitor loop connection which I left as is because I don't use. WHY DONT THIS CHEEZEBALL APP ALLOW ME TO ATTACH PICTURES

Fixed it fer ya.

Cotf?

$4000 for a 10 watt amp...does it really sound THAT good? Too rich for my blood, I won't be able to discern the difference.

RCA input jacks are unbalanced input connections. Yes the shield needs to go to the chassis on the left input just like the right. If it has always been like this you have been lucky. Or perhaps a solder joint has cracked or opened in some other fashion. Could even be lifted foil on the circuit board. What amp is it? Everything you wanted (or didn't) to know about grounding: https://centralindianaaes.files.wordpress.com/2012/09/indy-aes-2012-seminar-w-notes-v1-0.pdf

is OP @johnq saying he has his current receiver turned all the way up and he would like to be able to turn it up more?

DMH....Sent you a PM attached to an old PM...hope you get it. If you don't respond I'll send a new PM.

doing it is allowed I mean who gonna stop ya the Speaker Police? But posting about it is not.

Sorry...I just assumed all in this hobby know about REW. A super awesome FREE tool. And again sorry with my 40+ years of electronics experience the abbreviation Sig Gen is Signal Generator. And yes if you are serious get a UMIK from the miniDSP folks. Relatively inexpensive as far as microphones go and calibrated for our measuring purposes and integrates simply and easily with REW.

I dunno...tell the AVR the rear speakers are side surrounds? Can't hurt to try...or can it?...its impossible ,we'll all be killed.

Too bad it can't coincide with the EKlipsch

pull the plug?

How's about hook up REW, turn on the sig gen and find the annoying frequency? Just an idea. And does the annoyance change as you walk about.

A standing wave? At some particular frequency manifesting itself? Bass is a _itch in rooms, just the way it is, physics and all. We will only hear perfection in Heaven.

GL helping your friend with sale...what's up with the panels covering the opening of the bass horn? that's where the bass comes out

which crossover are you looking for? There have been several through the years. Many are here:

Super Duper!! Congratulations John.. "cuz we all need a place to call home..we all need a room of our own"

https://www.parts-express.com/Gold-Spade-8-AWG-6-2-Pair-095-670?quantity=1 I use these on Heritage crossover and speaker connections. Made for #6 screw and can go up to 8AWG. They also have ones for #8 screws. Check what your working with before ordering.

You are dating her?

What do you mean by it won't recognize it?

So many have tried Heresy(s) as their center...yours ears will tell you if you it is OK. You only have one wire pair coming to that position, they could still be wired in parallel.