hanksjim1

No problem...many early Khorns were sold for mono use and later another one added for stereo...cabinets would have the same construction and with identical drivers, Bob's your Uncle. Also recommended; get a good pair of new or rebuilt factory xovers from @Deang.

With your budget, suggest you keep an eye out for good used VPI and Clearaudio TTs... This site has good general info on all things TT: https://www.vinylengine.com/

tweeters have been upgraded...

Nice table. Do you have a cartridge in mind? MM or MC? Tonearm/cartridge matching makes a big difference in my experience. Also, if you haven't visited this site, you may want to for additional info (all things TT): https://www.vinylengine.com/

Yup, looks like a troll...

@chassell Curious...if you don't mind sharing...how much did you get them for?

Fourplay

Welcome to the forum! Just post some pics (must be less than 2mb) to the garage sale forum, folks will help with pricing...let us know where you are located, price can change depending.

not sure with what they used, but, I have had good luck with Titebond II...widely available just about everywhere...yes, also use the long clamps.

It's been three years since the OP posted...hope everything worked out for him!

Here's the Klipsch view...real world graphs depend quite a bit on room acoustics....I am sure other folks will chime in...

I've had good luck with these for lowering preamp gain into a power amp ahead of my Khorns...there are different values available depending on how much attenuation you need, just FYI https://www.ebay.com/itm/385665171453?epid=1600316098&hash=item59cb6f7ffd:g:MJwAAOSwSQxkf-zo&amdata=enc%3AAQAIAAAA4DBKIuLPb50IbhH%2Fb%2BaNaqnUp7wpZqyuYuWlPx1SL3SpS8nX6A74rAw1gTOPFmzAB7edv%2FOtpRIewOWHwpM5q%2FrFsKGjeyhKnxLq47fEJRhL8EnwQuJ1vZm8II0hFAa3F9LEg6lfLJ6WxzTvR859%2BhzZXuCGjzLUpmP6hoHfoUkG%2FWYsOE1Bu6C5D%2FxVs1Yn%2B0l7zpHPIs9NfaubjckXVkHTYQjpNcdxDlpSIGnmxwLzJzHqXet1uFTD4qT%2Ff0C2sZay4LjwskJPUeDjNeondSsX9EKY3vQdEBixg6FAnWKL|tkp%3ABk9SR7iW39uSYg

I believe PWK specified a 4 ohm version for the Khorn... These woofers were highly prized in the day. They were also used in the mighty Jensen Imperial p15ll or K33J TS Parameters-2.pdf

The reason I asked is I have seen the original ones go for over $2K each...

That's for 2 right? Original or reissue? I've seen the reissues new for $1,500, just saying. That being said I have no idea what the going price for used WE300b's is.

Yeah, should be fun getting those through the US mail...LOL

The politically correct answer: K-402

Nice upgrade for LaScalas https://seattle.craigslist.org/tac/ele/d/tacoma-klipsch-woofers/7620092942.html

Which drivers are you using? Best of luck with the sale!

Price varies somewhat according to location in my experience (California is high, central, rural Montana; not so much)....where are they located? That being said I've seen similar speakers go for $3k to $5K. Be sure to post in the "garage sale" section here on the forum to reach a bunch of likely interested parties...

They are also very well known for their modifications to the Decca cartridges: https://www.kenkessler.com/hi-fi/garrott-decca-cartridge/

L and right drivers out of phase with each other? Double check and make sure all connections are correct / loosen and re-tighten all crossover screws. "Muddy" sounds like something is definitely wrong. Have you measured the ohms of each driver (both tweeters working)? Finally, pics of the wired crossovers might help.

I think the early Cornwalls had a different speaker layout (first two pics are labelled 1958)....mid looks like a K-1000?

$40-50? just a guess...

Thanks for editing your post and confirming you are a troll...moderator?