USNRET Posted June 26, 2011 Share Posted June 26, 2011 Power Grid Changes Quote Link to comment Share on other sites More sharing options...
JL Sargent Posted June 26, 2011 Share Posted June 26, 2011 It's interesting to me that the story did not mention exactly what they are referring to and that is 60hz. It never occured to me that the grid corrected for deviations to that frequency and mostly for the benefit of electric clocks? I really doubt that a small variance in the grids freq. now and again will hurt anything including our precious audio gear. Quote Link to comment Share on other sites More sharing options...
Groomlakearea51 Posted June 26, 2011 Share Posted June 26, 2011 Freqs in Europe are 50 Hz. No problems between there and here for audio equip (I lived over there for a substantial majority of my years). Only thing I did when I came back was change fuses in equipment (double the amp rating for half the current voltage, e.g: from 2 amp to 4 amp for change from 240 VAC to 120 VAC) [H] Quote Link to comment Share on other sites More sharing options...
JJkizak Posted June 26, 2011 Share Posted June 26, 2011 Checking the frequency many many years ago with a very good frequency counter it checked 60.000 hz. Large frequency changes (10hz) will reak havoc on motors and such if it is of prolonged and stacato duration. JJK Quote Link to comment Share on other sites More sharing options...
Speakmeister Posted June 26, 2011 Share Posted June 26, 2011 The frequency of the electricity is one reason why Japan is having energy shortages due to the Fukashima meltdown, one half of Japan is 50Hz and the other 60Hz. I bet you can figure out what technology we gave them during reconstruction and what the Euros did. Quote Link to comment Share on other sites More sharing options...
CECAA850 Posted June 26, 2011 Share Posted June 26, 2011 Just think what it will do to turntable speed. Quote Link to comment Share on other sites More sharing options...
JJkizak Posted June 26, 2011 Share Posted June 26, 2011 With some of the music now-a-days it might sound better. JJK Quote Link to comment Share on other sites More sharing options...
Islander Posted June 26, 2011 Share Posted June 26, 2011 Line frequency doesn't seem to be as critical as it used to be. Most power supplies ("wall warts") are now marked "50-60Hz 100-240V". The power inlet on my E-V Dx38 is marked "90-250V 50-60Hz". As for turntable speed, the Technics units use a quartz-locked circuit that's independent of line frequency. Turntables with synchronous motors might have an issue. Quote Link to comment Share on other sites More sharing options...
Mighty Favog Posted June 26, 2011 Share Posted June 26, 2011 "The test is tentatively set to start in mid-July, but that could change." ...depending on what the frequency is.... Quote Link to comment Share on other sites More sharing options...
seti Posted June 26, 2011 Share Posted June 26, 2011 Turntables with synchronous motors might have an issue. I guess it is a good thing mine runs through a powervar. I would be very sad if anything happened to my 301. Quote Link to comment Share on other sites More sharing options...
Jay481985 Posted June 26, 2011 Share Posted June 26, 2011 The frequency of the electricity is one reason why Japan is having energy shortages due to the Fukashima meltdown, one half of Japan is 50Hz and the other 60Hz. I bet you can figure out what technology we gave them during reconstruction and what the Euros did. They also drive on the swordhand side as well..... Silly Brits Quote Link to comment Share on other sites More sharing options...
Guest " " Posted June 26, 2011 Share Posted June 26, 2011 the changes could result in loosing 12 seconds per year on your clock. keep in mind that UPS that you have in your homes can have up to 10% frequency variation and still be sold as a 60Hz UPS. Quote Link to comment Share on other sites More sharing options...
ZachA Posted June 28, 2011 Share Posted June 28, 2011 I think its funny how they dont minchin what the Hz could reach, like someone else said, if they go to far up or down it can screw up sensitive electronics that dont have a power line filter... Like some serg protectors and high end UPS supplies have. Quote Link to comment Share on other sites More sharing options...
oldtimer Posted June 29, 2011 Share Posted June 29, 2011 It's a bad idea which has the potential to give us more of a third world vibe. We have our own city (taxpayer) owned municipal electric utility, hopefully we won't participate. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.