Klipsch Employees Chief bonehead Posted February 10, 2021 Klipsch Employees Share Posted February 10, 2021 Just wanted to let everyone know that we are concerned about the problems with customer service. Here is the response I got from the head guy..... “we’re dealing with unprecedented traffic and are drastically increasing the size of the team to get back to world class service asap.“ We have more than doubled the customer service reps as of last week. We appreciate your patience. Thanks. 15 3 Quote Link to comment Share on other sites More sharing options...
babadono Posted February 10, 2021 Share Posted February 10, 2021 This is GOOD news. Quote Link to comment Share on other sites More sharing options...
USNRET Posted February 10, 2021 Share Posted February 10, 2021 Should I will send my unqualified but eager resume. I promise to answer the phone. 3 Quote Link to comment Share on other sites More sharing options...
Dave1291 Posted February 10, 2021 Share Posted February 10, 2021 Atta boy Chief! Thanks for the heads up. I love turning heads w/my gear. They all leave going wow and nose a bit more. After hearing my 2-channel system a couple months ago my brother-in-law wanted a new Sony home theater system. They tried to push a Sony speaker system with it but he went with a Klipsch system and just loves it. I haven't heard it yet but as long as he's happy that's a good thing! Kudo's to corporate! BTW, what's your extension in case he has problems? 😂 🤣 😂 😎 1 Quote Link to comment Share on other sites More sharing options...
billybob Posted February 10, 2021 Share Posted February 10, 2021 Good decision... 1 Quote Link to comment Share on other sites More sharing options...
OO1 Posted February 10, 2021 Share Posted February 10, 2021 Excellent News - Quote Link to comment Share on other sites More sharing options...
Peacemaker Posted February 10, 2021 Share Posted February 10, 2021 Sounds like someone was asleep at the wheel, albeit for a short time. Good to hear this is being resolved immediately and meeting the standards of the Klipsch brand. Sent from my SM-N960U using Tapatalk Quote Link to comment Share on other sites More sharing options...
OO1 Posted February 10, 2021 Share Posted February 10, 2021 Nobody was sleeping at the wheel , Covid 19 infected the planet which in turn affected klipsch Operations and a whole lot of other manufacturers as well ---and it takes time to come back to normal while most everybody is working remotely for safer distancing and isolation -- -the faster infection rates will be lowered , the faster workers can come back to the workplace - 2 Quote Link to comment Share on other sites More sharing options...
yamahaSHO Posted February 10, 2021 Share Posted February 10, 2021 It took some time for my ticket to be answered, with a bit of help from contacting Klipsch over FB, but I wasn't in a hurry and the price I paid for what I was looking for was more than fair. :) Quote Link to comment Share on other sites More sharing options...
pbphoto Posted February 10, 2021 Share Posted February 10, 2021 7 hours ago, RandyH000 said: Nobody was sleeping at the wheel , Covid 19 infected the planet which in turn affected klipsch Operations and a whole lot of other manufacturers as well ---and it takes time to come back to normal while most everybody is working remotely for safer distancing and isolation -- -the faster infection rates will be lowered , the faster workers can come back to the workplace - Does this have anything to do with staffing a help desk? 1 Quote Link to comment Share on other sites More sharing options...
Peacemaker Posted February 10, 2021 Share Posted February 10, 2021 9 hours ago, RandyH000 said: Nobody was sleeping at the wheel , Covid 19 infected the planet which in turn affected klipsch Operations and a whole lot of other manufacturers as well ---and it takes time to come back to normal while most everybody is working remotely for safer distancing and isolation -- -the faster infection rates will be lowered , the faster workers can come back to the workplace - I understand what has and is happening, however, in my opinion the acknowledgement and changes they are implementing now should've been done sooner. Always room for improvement, even during a crisis. 1 hour ago, pbphoto said: Does this have anything to do with staffing a help desk? I second that question. 1 Quote Link to comment Share on other sites More sharing options...
OO1 Posted February 10, 2021 Share Posted February 10, 2021 5 hours ago, pbphoto said: Does this have anything to do with staffing a help desk? --I'm gonna surprise you --but I get through every time , and , no problem with staffing at all - 1 Quote Link to comment Share on other sites More sharing options...
babadono Posted February 10, 2021 Share Posted February 10, 2021 1 hour ago, RandyH000 said: --I'm gonna surprise you --but I get through every time , and , no problem with staffing at all - Please share with all the # you call..in case some how or other the wrong # is being used 1 Quote Link to comment Share on other sites More sharing options...
OO1 Posted February 10, 2021 Share Posted February 10, 2021 1 hour ago, babadono said: Please share with all the # you call..in case some how or other the wrong # is being used Last time , I Called klipsch - it was first thing in the morning , phone numbers are online -klipsch.com - klipsch can be reached by FB @yamahaSHO may have a link - you can PM @Trey Cannon by indicating your email info and your question - 2 Quote Link to comment Share on other sites More sharing options...
Klipsch Employees Trey Cannon Posted February 11, 2021 Klipsch Employees Share Posted February 11, 2021 9 hours ago, RandyH000 said: Last time , I Called klipsch - it was first thing in the morning , phone numbers are online -klipsch.com - klipsch can be reached by FB @yamahaSHO may have a link - you can PM @Trey Cannon by indicating your email info and your question - I am glad to help where I can...questions I can do...orders and such...not so much. Good news...They just hired 6 new customer support folks...once trained, it should help a bit. prosystemdesign@klipsch.com I plan to be on vaca until the end of Feb. 5 Quote Link to comment Share on other sites More sharing options...
OO1 Posted February 12, 2021 Share Posted February 12, 2021 20 hours ago, Trey Cannon said: .They just hired 6 new customer support folks...once trained, it should help a bit. Much Obliged - Quote Link to comment Share on other sites More sharing options...
RoyBob Posted February 17, 2021 Share Posted February 17, 2021 Ka-1000 does anyone have a part number and manufacturer for the gain pot. 100K double gang. I'll assume it is logarithmic but that is a guess. No info on pot except Taiwan Alpha. No help from Klipsch or the service center except ship it to them for a 10 minute repair. Would like a direct replacement. Any help would be appreciated. Thank you. Quote Link to comment Share on other sites More sharing options...
barjohn Posted February 20, 2021 Share Posted February 20, 2021 I am more than a little frustrated. I have sent two sets of email questions to Klipsch CS via their web site, more than several weeks ago and about 2 weeks apart. No response. I placed an order for an item last week and paid for 2 day shipping, no sign of the item being shipped and a strange message on the order status reads: "Processing Exported" with no indication what that means. I emailed requesting the status of my order and just received an automated message illustrating how ignorant AI systems are when they try to guess what a human is asking. I have purchased a complete 5.1 Klipsch wireless system (not cheap) and frankly, I am starting to wonder if I made a good choice when the company takes weeks to respond, fails to ship product in a timely fashion and ignores customer requests. Please don't lay this on COVID. Whether employees are working mostly from home or not is not an excuse if they are working. I have tried calling but after sitting on hold for over an hour I gave up. I saw the post claiming they are expanding their CS but if true, these people must not being doing much. Many smaller companies, like WISA, Enclave Audio, and large companies like Amazon have managed to stay responsive through COVID, get orders out in a timely fashion and respond to customers. Is anyone here having any luck getting a response from the company and if so, what is your secret? 2 Quote Link to comment Share on other sites More sharing options...
billybob Posted February 21, 2021 Share Posted February 21, 2021 Welcome to the forum! How can we best help you? Thanks! Quote Link to comment Share on other sites More sharing options...
barjohn Posted February 21, 2021 Share Posted February 21, 2021 Thank you for the welcome! I found the answer to one of my questions by actually removing the bottom base from a Kilpsh RP-140wm speaker. That question was can you remove the base (is it just decorative?) or is it part of the speaker. I was hoping to get an answer without taking the base off in case it would somehow damage the speaker. What I discovered is that all of the electronics are mounted to the base so it is not just a decorative piece. The reason I wanted to remove it is that it is not a rectangle, but more of a trapezoid and I wanted to mount the speaker on a wall mount to make my little lady happy. She wanted them up high and not in the direct line of sight. I was able to mount them anyway as the clamps secure tightly enough and I added the Blu Tac for extra security. My other questions had to do with using the RP-140WMs with the SoundSend transmitter and I have since worked with WISA and SoundSend to try and resolve some of the issues that arose when I was trying to use the RW-51M speakers as front speakers and the Platin Monaco as rear and center channel speakers. I wound up going with the RP-140WMs all around with the RP-440WC as the center channel and RW-100SW for the sub (no RP-110WSWs to be found). I would love to go with the RP-440WF as front channels but those too are hard to find. When I find the sub and the towers at the right price I will probably buy them and replace the fronts and the sub. One huge advantage to the RP series for Wireless over the Reference series (besides the sound and build quality) is the ability to designate a speakers position from the back of the speaker and have it remember it even if unplugged. With the Reference series, it depends on the SS assigning the speaker a position and then you dragging it to the right position if it is wrong. Where it gets confusing is when it assigns two speakers to the same location. Trying to identify which speaker to move and move the right one is very tricky. With some speakers you can chime the speaker and then know which one to move but the Klipsch have a bug in their coding that doesn't allow a speaker to chime unless it is receiving audio (not published information) therefore it won't chime unless you first have an audio stream going to it. Normally, during setup you would not have an audio stream going to the speaker. Another issue is that you can't tell what version of firmware is loaded in your speaker with the SS and no way to update it without the HUB1. I just ordered a refurbished HUB1 for the purpose of finding out what software version they are and updating my speakers if needed. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.