jwc Posted February 10, 2008 Share Posted February 10, 2008 Roy, do the polars match up well with the scala bass bin and the K402? I don't think I've ever heard or seen "coverage specs" on the scala. By the way....I got my K402's. Opened one and fine shape. Haven't opened the second one. Thanks for the help getting them. jc Quote Link to comment Share on other sites More sharing options...
bodcaw boy Posted February 10, 2008 Share Posted February 10, 2008 Roy, do the polars match up well with the scala bass bin and the K402? I don't think I've ever heard or seen "coverage specs" on the scala. By the way....I got my K402's. Opened one and fine shape. Haven't opened the second one. Thanks for the help getting them. jc i will have to refresh my memory but if i remember correctly, the polars match in a wide region giving a wide range for crossover freq. i will see what i can find. did you like the small 402 horn?[8-|] in Christ, because of God's grace, roy Quote Link to comment Share on other sites More sharing options...
Deang Posted February 11, 2008 Share Posted February 11, 2008 I got two emails asking about a passive for the JubScala. Diehard tube guys aren't going to bite on the Crowns. Heck, diehard solid state guys won't even bite on them! Quote Link to comment Share on other sites More sharing options...
Coytee Posted February 11, 2008 Share Posted February 11, 2008 I got two emails asking about a passive for the JubScala. Diehard tube guys aren't going to bite on the Crowns. Heck, diehard solid state guys won't even bite on them! Tell them about the Dx38 and they can keep their tubes or solid state or both! If they still don't like that, for gosh sake, shut up, take their money & make them some passives!! [G] Sell them what they want & not what they need. Quote Link to comment Share on other sites More sharing options...
jwc Posted February 11, 2008 Share Posted February 11, 2008 Roy, you have a PM. jc Quote Link to comment Share on other sites More sharing options...
Guest " " Posted February 11, 2008 Share Posted February 11, 2008 Are we talking a k-402 with 1 lascala bass bin or with 2 double stacked lascala bass bin's? Quote Link to comment Share on other sites More sharing options...
jwc Posted February 11, 2008 Share Posted February 11, 2008 a k-402 with 1 lascala bass bin best I understand it. Quote Link to comment Share on other sites More sharing options...
bodcaw boy Posted February 11, 2008 Share Posted February 11, 2008 jcpipes,just as i thought, the coverage patterns overlap from about 400 hz to about 800 hz so the polar patterns will be a fine fit with the 402; for the 510, from about 400 to about 600, smaller overlap but achievable.in Christ, because of God's grace,roy Quote Link to comment Share on other sites More sharing options...
jwc Posted February 11, 2008 Share Posted February 11, 2008 Wow. Now that is great news. More the reason to slap some Roy horns on the scala. Integrate a jub bin later or live-on with a scala and killer subs. Roy, you guys may have to put the LS II bin as a item alone. Seriously. I know I would buy some. Heck, put them on the Cinema lineup with black splattered paint. So what if they don't meet THX specs. Us nuts will go for em. Everyone will want one as a center. jc Quote Link to comment Share on other sites More sharing options...
IndyKlipschFan Posted February 12, 2008 Share Posted February 12, 2008 For a center, or three up front too! Quote Link to comment Share on other sites More sharing options...
IB Slammin Posted February 12, 2008 Share Posted February 12, 2008 Pipester, You have a PM. tc Quote Link to comment Share on other sites More sharing options...
jwc Posted February 12, 2008 Share Posted February 12, 2008 Pipester, You have a PM. tc I don't see it. jc Quote Link to comment Share on other sites More sharing options...
jacksonbart Posted February 12, 2008 Share Posted February 12, 2008 I want to create a RFWALL. What's it gonna take? Quote Link to comment Share on other sites More sharing options...
Wrinkles Posted February 20, 2008 Share Posted February 20, 2008 Wow. Now that is great news. More the reason to slap some Roy horns on the scala. Integrate a jub bin later or live-on with a scala and killer subs. Roy, you guys may have to put the LS II bin as a item alone. Seriously. I know I would buy some. Heck, put them on the Cinema lineup with black splattered paint. So what if they don't meet THX specs. Us nuts will go for em. Everyone will want one as a center. jc JWCullison, I have not heard of anyone doing this yet, but with all the discussion a while back about the LaScala bass bin mod, just maybe this would be something someone will attempt and place the 402 on top. I will eventually, but not in the short term near future. I do not even have the 402s yet (ordered however). I will be using the Crowns XTI1000 amps and not knowing much about the amps now, I wonder about the EQ that was stated as necessary for the bass bin mod. How much can be EQ'd with these amps and with the LaScala program that is recommended to be used, would it cover the lower frequencies that probably would need a boost at the same time EQing the recommended fequencies? Any thoughts, anyone? I'm just trying to look ahead. Wrinkles Quote Link to comment Share on other sites More sharing options...
jwc Posted February 20, 2008 Share Posted February 20, 2008 I wonder about the EQ that was stated as necessary for the bass bin mod I'm not sure what you are asking? There are settings available for the K402 on top of the scala using the DSP section of those Crowns. There will be no guesswork. When you get the amps and the K402's...someone can send the settings to you. Does that answer your question? jc Quote Link to comment Share on other sites More sharing options...
bhendrix Posted February 20, 2008 Share Posted February 20, 2008 Hi Wrinkles, I emailed you the file for the amp settings the other day. Did you receive it? Bill Quote Link to comment Share on other sites More sharing options...
Wrinkles Posted February 21, 2008 Share Posted February 21, 2008 Hi Wrinkles, I emailed you the file for the amp settings the other day. Did you receive it? Bill Bill, I received the files. Thankyou. My recent question seems to have been confusing. I will attempt to reword. Sorry. The question stems from a thread I startedthe middle of last year on the use of the ported Bass Bin modificationwhere a chamber is placed under the LaScalas and the doghouse floorremoved allowing the LaScala bass to supposedly extend down into the low30s . In that thread a contributor discussed the probable need forfrequency boost down in that frequency area. So, my question is can theCrowns, in the software, boost that area of the frequency band atthe same time it is providing the necessary adjustments presentlyprovided in the files provided?It seems that an area of weakness in the LaScala non-version 2 isthe limited low end. If I felt that the bass from the LaScala bins was not deepenough, then I was thinking ahead as to how to remedy this. One optionis of course subwoofers, but I'm not sure I would want to use up anymore realestate.I hope I reworded the question better. So, has anyone ventured down this path using Jubscalas with bass bin mod? Thanks everyone, Wrinkles Quote Link to comment Share on other sites More sharing options...
DrWho Posted February 21, 2008 Share Posted February 21, 2008 So, my question is can the Crowns, in the software, boost that area of the frequency band at the same time it is providing the necessary adjustments presently provided in the files provided? Yes, absolutely (as long as there are extra filters left to be used) Quote Link to comment Share on other sites More sharing options...
Marvel Posted February 22, 2008 Share Posted February 22, 2008 Wrinkles, If you need any of the info on the bass mod, let me know. I have a folder with most of the info in it. Bruce Quote Link to comment Share on other sites More sharing options...
Wrinkles Posted February 22, 2008 Share Posted February 22, 2008 Bruce, I am interested. I will not be moving on it soon, but maybe late spring or summer. I will have little time until then. Are these web addresses or paper info? Wrinkles Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.