babadono

Does your AVR have a sub level control as well as the sub OFF/ON?

OK let's wait for the Y cable. Maybe that will do the trick. Why are the crossovers set to 250? Is that as low as main speakers can go?

Super silly question...but that's me Mr. Super Silly....no green LED and no sound? Or just no LED?

@mr clean What is your brothers first name? God loves names.

Wow really? Sounds like it definitely needs an active crossover and bi amping. Which I know you going to do

Is this from Norway?

I was thinking the same thing😇

Bruce, Very sorry to hear this. Prayers being said for you, your wife and family. Eric

Flux is your friend No doubt about it lead free solder sucks. It takes more heat to melt. In the over all picture of life on earth how big a problem is lead in solder? Really?

@PineappleDave Just by chance i saw this. If you want someone to be notified you need to quote one of their posts or put their forum name in with an asterisk. Have you had the cover off your unit? One of mine had a transformer that could be adjusted to 100 120 volt input. Maybe yours does too.

They're double walled like a thermos bottle. I love mine also. Don't smoke on it very often though. I smoked a turkey overnight once and it was delicious, so I know it is possible to keep it smoking a good long time like @rplace said.

Can you say "hormones"?

No freaking way.. when I grow out of it put me in a pine box and cover me with dirt.

Heard of crap from the IRS?........No never

Don't want to crap this thread too much..... Where to obtain is in first post. You still need to be close to corners for max bass capabilities just not perfect fit into corner like the KHorn. Some pics of my setup:

KHorn owner for 30+ years, now Jubilee for a little over a year....the comparison between the K400 and the K402...well there is no comparison. And the Jubilees Bass horn's freedom from absolutely perfect corners make the Jubilee over the KHorn a win,win,win. How do they sound? Dang good. And mine aren't really dialed in completely yet.

Out near Landers...don't get abducted be any aliens👽

two loads off of different taps of an output transformer? @tube fanatic is this OK?

@Ivaols FYI, I checked the schematic of the Xilica output. When the mute is engaged it shorts pin 2 to 3 on the XLR output connectors. So if you had those outputs muted and had XLR cables going from the outputs of the Xilica to the inputs of the ATI amp you already had pins 2 and 3 shorted at the input of your amp. If this was still too noisy for your likeness then it is 99.9% sure it is your amp causing the problem. If it were me I would still want to check for the Pin 1 problem I mentioned before. Noise is sometimes a dastardly thing to track down.

You have to know the secret handshake While offering a six pack with the other hand But seriously @MetropolisLakeOutfitters is da man.

We talked about this in another thread and Dave was going to bring but only to Rodney's not to the factory of course.

The more martinis I have the easier I fail the hi-pot test

And you're NOT bringing them to the pilgrimage

The speaker will not levitate with that Mac thingy on top.

Put 600 volts across it, let's see if it measures up