codewritinfool

Yeah I'm in my early 50's and I'm not feelin' it. That was just awful. All I saw was a bunch of flashy ego with awful lyrics, awful dancing, and awful vocals. I was not impressed. Maybe I'm too old now.

Which 300B amp did you acquire?

Is that Dave? If so, I agree with Jack.

I chose the top for the cut because my crossover is in the top section. Made for a shorter LF cable.

yes.

Please never ever toss factory cabs. Someone here will give them some love.

I did a similar thing but used a Speakon. I also did a round on the edges with a router.

I left part of the HF front panel behind to cover that area of the peak. It was ultimately covered with trim in my case so I knew it wouldn't show. Essentially a 3/4" shim. Since I was rebuilding the tops anyway, it didn't matter that I lost part of the front panel.

They do now.

https://www.engadget.com/2020/01/16/bose-closing-down-stores/

RIP

RIP Moving Pictures was the first CD I ever owned. Still my favorite Rush album. If you can, please donate $21.12 to your favorite cancer research organization.

For those of you who know what this is, Micro-Cap circuit simulation software is now free. http://www.spectrum-soft.com/download/download.shtm From their website: Numerous features contribute to Micro-Cap 12's power. Among them are: Integrated schematic editor and simulator. Dynamic analysis updates waveforms and curves as you edit Native digital simulator Worst Case analysis to find the statistical and extreme limits of performance Smoke Analysis to assess how close the circuit is to violating maximum operating limits. Integral circuit optimizer with multiple optimization methods. Integrated active and passive filter design function Device library with over 33,000 parts. Analog and digital behavioral modeling Schematic waveform probing. On-schematic voltage/state, current, power, and condition display During the run plotting Smith charts / Polar plots. Multidimensional parameter stepping. Monte Carlo analysis. 3D plotting. Performance functions and plots Measure functions to measure circuit behavior Optimizing parts modeler Gummel-Poon, Mextram and Modella bipolar models Berkeley BSIM 1, BSIM 2, BSIM3, and BSIM4 MOSFET models The latest Philips device models, including MOS 11, 20, 31, 40, and PSP 102 Hefner IGBT model IBIS model translator Animated LEDs, switches, bars, meters, relays, stoplights, and DC motors Lossy transmission lines Jiles-Atherton nonlinear magnetics model PCB interface to popular packages Transient analysis - for investigating time domain circuit behavior AC analysis - for investigating small signal behavior DC analysis - for plotting static DC variables Transfer Function analysis - for calculating the DC transfer function Stability analysis - to find the stability limits for linear circuits Harmonic distortion analysis Intermodulation distortion analysis Extensive mathematical operators and variables.

Is anything from the heritage lineup at CES this year? Like La Scalas or Klipschorns?

Why can't we have a gofundme for a new server, if @Chad specs it?

Your link is broken. This is the correct link: http://www.itishifi.com/2012/08/klipsch-tscm.html

I have kind of a budget setup for my splits and THTLP. I used the DCS385-4 coupled with an SD100 plate amp. For my little outdoor rig, the SMSL Q5 Pro (35W / ch into 8 ohms) has a "sub out" (single RCA) that crosses over at 200Hz. The SD100 has its own level control and its own crossover control. I usually set it to around 100Hz, sometimes lower. I exclusively use my setup outdoors. @Schu is right. The trick is to balance it with the LS. Repeated listening and walking around will help get it dialed in. You don't want to notice the sub by itself. You want to hear the entire thing as one cohesive unit, without holes and without peakiness.

Yeah and hopefully a party at your place someday too!

Thank you, Jim. Too bad that log was lost.

Thanks, guys. I was hoping to get a photo of the production log for my Klipschorns.

Happy New Year. I’m listening to solder cool down over here. Also listening to gunfire outside.

Could someone please look up production log info for 2F847 & 2F848? Thank you!

I have an Emotiva Stealth DC-1 that I really enjoy.

I have a Brennan B2. I like it ok, but it isn't foolproof at all. It needs some serious development time to make it great. I started to design my own until I found the Brennan in roughly the same form factor. I'm thinking about working on my project again because I believe I can do it better.

Agreed. Storage is cheap. If you're going to rip CDs, store them as FLAC.