Mighty Favog Posted August 28, 2018 Share Posted August 28, 2018 In the next year or so I plan on buying a tool box for the house. Chances are (cause I wear a silly grin) it'll about 73-inches long, botton unit only and weigh between 600 and 900 lbs. I also plan on buying a riding lawn mower. 42-46" with a 20hp motor. The driveway is about 120 ft. long at a 14-degree grade. With the gear ratio unknown, with said lawn mower/tracker be able to pull this beast of a tool box up this hill to the garage?? I also plan on getting some sort of 4WD vehicle for the winters to get up this Olympic sized ski jump of a drive way.... Quote Link to comment Share on other sites More sharing options...
WillyBob Posted August 28, 2018 Share Posted August 28, 2018 That quite a box..and a helluva grade.. Paved drive.... maybe I'm trying to relate my 8hp Troybilt tiller to that Quote Link to comment Share on other sites More sharing options...
Brac Posted August 28, 2018 Share Posted August 28, 2018 How far north are you, If I had that drive here in Maine I would consider putting radiant heat piping under it. Quote Link to comment Share on other sites More sharing options...
Mighty Favog Posted August 28, 2018 Author Share Posted August 28, 2018 1 hour ago, WillyBob said: That quite a box..and a helluva grade.. Paved drive.... maybe I'm trying to relate my 8hp Troybilt tiller to that It is paved. 6" concrete only 3-years old. Very good shape. 1 Quote Link to comment Share on other sites More sharing options...
CECAA850 Posted August 28, 2018 Share Posted August 28, 2018 Winch and a long cable. Quote Link to comment Share on other sites More sharing options...
Schu Posted August 28, 2018 Share Posted August 28, 2018 Torque is a more proper way of looking at the issue... not horsepower. 1 Quote Link to comment Share on other sites More sharing options...
JL Sargent Posted August 28, 2018 Share Posted August 28, 2018 No, I don't think that will work. I wouldn't trust a belt driven lawn mower for sure. One section of my driveway is 14 deg and another section is 15 deg. I have a 22hp riding mower and I don't get on those while cutting grass. I have a 25hp Yanmar 4x4 tractor with a 3pt finishing mower for those steep sections. Quote Link to comment Share on other sites More sharing options...
Coytee Posted August 28, 2018 Share Posted August 28, 2018 I bought Joe's monster box from him. When it arrived here, I had to use my front loader (full sized JCB backhoe/loader) to 'crane" it off the trailer and then stand it upright. Carried it (via backhoe) up gravel driveway and placed about three feet away from garage door where we put some plywood down on the gravel so it would ramp up the 2" or so lip from gravel to floor. I like the idea of a winch over your mower. I'm sure you would be concerned about what happens if the cable snapped! Perhaps you know someone that flies one of those crane helicopters?? If you want to pay to get my JCB there, we can crane it and then go dig a bunch of holes in your yard just for kicks & grins. (it's actually a fair amount of fun if you've never done it, I find it very relaxing) BTW, these are his pictures, I didn't take any as I was pulling it off. I did expect it to be a multi-person job but with some patience, I was able to get it off the trailer and to the garage single handed. Just had another thought come to me.... when you buy it.... will they have delivery service?? Quote Link to comment Share on other sites More sharing options...
Mighty Favog Posted August 28, 2018 Author Share Posted August 28, 2018 Had another thought. Wonder if a local towing companies will put it on a flatbed.... Quote Link to comment Share on other sites More sharing options...
richieb Posted August 28, 2018 Share Posted August 28, 2018 === depending on your tools of choice I’d guess $10-15K to fill that baby properly. Quote Link to comment Share on other sites More sharing options...
JJkizak Posted August 28, 2018 Share Posted August 28, 2018 I have pulled out 14 stumps (after cutting the roots as much as possible) with my 22HP Cub Cadet zero turn. With me on it it weighs 800 pounds and with a running start it knocks the crap out of those stumps. Your tool box would be a piece of cake. On second thought I could slowly push it up by hand. JJK Quote Link to comment Share on other sites More sharing options...
Coytee Posted August 28, 2018 Share Posted August 28, 2018 That kind of brings up a thought that I had.... Could you in essence, push it up with a vehicle? This certainly has some dangers.... but imagine two of you in front of the box "steering" it while someone you trust (100%) is slowly pushing from behind with a truck or something that has the muscle to not only push it up the hill but....(to me just as important) strong enough to hold it in place) After wrestling this one around with the backhoe, once it was on its wheels, it was not too difficult to move around. Once I got it off the plywood and onto the concrete garage, one person can wrestle it around. You certainly don't want it free-wheeling down your driveway.....WEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE and pancake some 8 year old on their Bigwheel..... Quote Link to comment Share on other sites More sharing options...
CECAA850 Posted August 28, 2018 Share Posted August 28, 2018 27 minutes ago, Mighty Favog said: Had another thought. Wonder if a local towing companies will put it on a flatbed.... Absolutely. That's how guys around here move the big boxes when they change jobs. No need to unload them either. They tie on with a winch, load it on the flat bed, level it out, tie it down and go. That's about the safest way to move one of those behemoths. Quote Link to comment Share on other sites More sharing options...
rplace Posted August 28, 2018 Share Posted August 28, 2018 How is it getting to the bottom of the driveway? By truck I would assume. Why wouldn't the delivery company bring it up the driveway? Every giant thing I have bought that has not been local came on a big honking truck to my lamp post by my front walk...and I've got a fairly long driveway. 1 Quote Link to comment Share on other sites More sharing options...
WillyBob Posted August 28, 2018 Share Posted August 28, 2018 can you pull the drawers out of the cabinet? I was concerned about the belt drive part of the drive on the mower. My troybilt would prolly pull my little Honda car... But is is gear drive. Low gear at WOT is still walk along side of it. Quote Link to comment Share on other sites More sharing options...
WillyBob Posted August 28, 2018 Share Posted August 28, 2018 a truck with lift gate... problem solved Quote Link to comment Share on other sites More sharing options...
Mighty Favog Posted August 28, 2018 Author Share Posted August 28, 2018 49 minutes ago, Coytee said: Just had another thought come to me.... when you buy it.... will they have delivery service?? I really can't depend on if they do or not. Most of the ones I'm looking at are used. But probably Snap On KRA series or Matco 4S. Quote Link to comment Share on other sites More sharing options...
Coytee Posted August 28, 2018 Share Posted August 28, 2018 4 minutes ago, WillyBob said: can you pull the drawers out of the cabinet? I'm guessing they can all be removed one way or another. Both my old one (Craftsman) and the one I just got from Joe (Snapon) have drawers that are removable. 1 Quote Link to comment Share on other sites More sharing options...
WillyBob Posted August 28, 2018 Share Posted August 28, 2018 that will knock a significant amt of weight off. Quote Link to comment Share on other sites More sharing options...
Mighty Favog Posted August 28, 2018 Author Share Posted August 28, 2018 10 minutes ago, rplace said: How is it getting to the bottom of the driveway? By truck I would assume. Why wouldn't the delivery company bring it up the driveway? Every giant thing I have bought that has not been local came on a big honking truck to my lamp post by my front walk...and I've got a fairly long driveway. The initial plan was to rent a trailor and pull it with a Toyota 4Runner (Class 3 hitch I think. It has a 7-pin light connection but no brake controller inside). I read on line that electric brakes aren't needed till the trailor's GVWR reaches 3,000 lbs. But my articulated trailor backing skills are nill to none. 😁 ......I know.....learn. But l'd rsther learn on a level surface first. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.