Heritage_Head Posted July 26, 2019 Author Posted July 26, 2019 8 hours ago, WMcD said: I think it is not just the horn . . . the cost of the driver is probably a big consideration with respect to home units. It is, IMHO, a bit discourteous to ask Roy for the reasoning of Klipsch's choices in business matters or technical matter and I'd never do it. Further, it wouldn't work! So why annoy friends? WMcD Fair enough... I cant argue your opinion 1. because its your opinion. 2. I agree with all of it. Never intended to be rude or be in poor taste. But after reading your opinion that maybe it was (a bit poor taste/discourteous) and taking a sec to think. It is a bit out of lineI/maybe a bit poor tase or even rude. I never expected a detailed actual klipsch full break down on the topic (if it was ever discussed at all). I wasn't even per say expecting or asking for Roys response. Being that hes klipsch and thats always going to be a by the books answer (for good reason) So that in itself makes the title of my thread maybe tacky/rude. I would love even a basic answer yes. But Roys hands will always be potentially tied making the request unfair to him (being I know this) .... But I was just being curious and was even more than even hearing Roys opinion, To get others to comment on maybe the rumor they heard or there basic opinion on the matter. This forum as a whole is the klipsch everything you need or want to know capital of the world. Its not even close. So even other members opinions was the main intent. The title gave it a maybe possible Roy appearance, and as klipsch addicts hes about as famous as it gets of people physically (not passed on) able to post. My apology to any members I may have offended and to Roy for exploiting and asking maybe an unfair question. Quote
glens Posted July 26, 2019 Posted July 26, 2019 13 minutes ago, Heritage_Head said: Never intended to be rude or be in poor taste. But after reading your opinion that maybe it was (a bit poor taste/discourteous) and taking a sec to think. It is a bit out of lineI/maybe a bit poor tase or even rude. I'm not being referred to in that, but I don't feel it's a discourteous or dis-anything-else question to ask. It'll be answered in whichever manner, or unanswered, but asking it isn't out of line IMO. 1 Quote
Heritage_Head Posted July 27, 2019 Author Posted July 27, 2019 17 minutes ago, glens said: I'm not being referred to in that, but I don't feel it's a discourteous or dis-anything-else question to ask. It'll be answered in whichever manner, or unanswered, but asking it isn't out of line IMO. I see both sides. My thinking was that or to be honest i never really even contemplated it anything (like some threads I start I think about if it might be poor taste). Roy is handcuffed to his employment to klipsch and titling a thread for his response puts him in a potentially stuck in the middle deal. Maybe its fine and talk away.... or maybe its a current klipsch strategy so any answer wouldn't possibly be the type of answer as creator and engineer of klipsch products would want to be stuck with as an answer. So I guess my apology is for putting him in maybe an unfair [position. Possibly he might look bad to some members for not showing and responding. But he again possibly knows any thing he's able to say wont be any better than not replying. A discussion or debate with a person who cant do either can be seen as an unfair request. My intent was good but my delivery was a bit reckless. Quote
glens Posted July 27, 2019 Posted July 27, 2019 I disagree. The worst spot he could be put in would be having to say "I can't discuss that here at this time." Next worse would be having to say "I don't want to discuss that here at this time." Or he could ignore the question altogether, if he's even aware of it... Any way: no harm, no foul in my estimation. 2 Quote
Emile Posted August 16, 2019 Posted August 16, 2019 Add-on ... Recall @MenloBob's awesome K-510 w/ dual woofer design. By chance, found a company that makes a "BIG" CF-4 D'Appolito design speaker. Comp is Tyler Acoustics who makes a PD-30 speaker. MTM configuration with 15" Pro Eminance woofers ... do not know the size of the horn or CD. See ... http://www.tyleracoustics.com/pro_dynamics.html . Yes, they also have bigger models with 18" woofers, etc Just thought this might be of interest to those looking for "bigger" Epic speakers 2 Quote
MenloBob Posted August 16, 2019 Posted August 16, 2019 35 minutes ago, Emile said: Recall @MenloBob's awesome K-510 w/ dual woofer design. I'm currently working up plans for triple K510s with single woofers for a built in LRC wall unit in our master bedroom. We're planning a remodel and now is my opportunity to get something upstairs. The idea is about a 10' wide entertainment cabinet with Heresyish sized cabs embedded left, right and center. Might use Hypex's Fusion DSP plate amps for this build. 2 Quote
Emile Posted August 16, 2019 Posted August 16, 2019 1 hour ago, MenloBob said: triple K510s with single woofers for a built in LRC wall unit Awesome ... looking forward to it Quote
Emile Posted August 17, 2019 Posted August 17, 2019 21 hours ago, Emile said: "BIG" CF-4 D'Appolito design speaker. Comp is Tyler Acoustics who makes a PD-30 speaker. MTM configuration with 15" Pro Eminance woofers ... do not know the size of the horn or CD Update ... horns are 6.5x6.5x12 and driver is a 1 inch type, crossed at 2000Hz. Bit disappointed?? Quote
ClaudeJ1 Posted August 17, 2019 Posted August 17, 2019 On 7/26/2019 at 7:11 PM, PrestonTom said: It is a possibility. However in a two-way you are typically crossing somewhere between 500-1000. The higher the crossover point, the more difficult it is for the woofer to deliver a clean sound (unless you use tiny woofers in which case you are giving up low frequency extension). If you cross with a lower point then the tweeter driver may have difficulty. You really do limit yourself when you try and design a two-way system. There aren't nearly as many choices. Except for the problem with vertical polar control, I am happy with a 2 inch throated K-510 horn. There is a decent selection of affordable (frequently used with new diaphragms) drivers that can do the job (EV DH 1, or JBL 2445/6 for example). Good luck, -Tom Good advice, Tom. I have owned all of the drivers and horns you mention and can attest to the veracity of your comments with measurements and listening. Physics is physics. Quote
pzannucci Posted August 18, 2019 Posted August 18, 2019 21 hours ago, Emile said: Update ... horns are 6.5x6.5x12 and driver is a 1 inch type, crossed at 2000Hz. Bit disappointed?? Crossing from 15s at 2k, hmm... yup Horn looked a little small for what you would expect. 1 Quote
MenloBob Posted August 28, 2019 Posted August 28, 2019 Well the Cornwall4 has been announced with an all new K702 mumps midrange. Will be interesting to see how it compares in size to the K510.. https://www.klipsch.com/news/klipsch-refreshes-iconic-cornwall-speaker-enthusiasts-get-first-listen-at-rocky-mountain-audio-fest-2019 2 Quote
PrestonTom Posted August 28, 2019 Posted August 28, 2019 It will be quite interesting to see more of the specs on this new Cornwall. 1 Quote
CECAA850 Posted August 28, 2019 Posted August 28, 2019 43 minutes ago, MenloBob said: Well the Cornwall4 has been announced with an all new K702 mumps midrange. Will be interesting to see how it compares in size to the K510.. https://www.klipsch.com/news/klipsch-refreshes-iconic-cornwall-speaker-enthusiasts-get-first-listen-at-rocky-mountain-audio-fest-2019 Mumps! Quote
avguytx Posted August 28, 2019 Posted August 28, 2019 So is this horn larger than the Heresy III horn hopefully? It's crossing over at 700Hz like before? I guess it's hard to say just yet. $6,000 a pair MSRP? That's one way to recoup the expense for a new mid horn. 2 Quote
MenloBob Posted August 29, 2019 Posted August 29, 2019 On 8/28/2019 at 11:09 AM, CECAA850 said: Mumps! I think I'm gonna make Mumps! tshirts for Pilgrimage next year... 1 Quote
CECAA850 Posted August 30, 2019 Posted August 30, 2019 40 minutes ago, MenloBob said: I think I'm gonna make Mumps! tshirts for Pilgrimage next year... Nice. I'm the number one mumps fan. Quote
MenloBob Posted September 11, 2019 Posted September 11, 2019 Looks like are wishes have been granted, K510s in a 2 way home tower. Hopefully the LCR speakers will be orderable separately from the subs for 2 channel. Thanks team! https://www.klipsch.com/cedia 3 Quote
pzannucci Posted September 11, 2019 Posted September 11, 2019 5 hours ago, MenloBob said: Looks like are wishes have been granted, K510s in a 2 way home tower. Hopefully the LCR speakers will be orderable separately from the subs for 2 channel. Thanks team! https://www.klipsch.com/cedia Thank you for the brochure though I don't see anything about a K510 in that document. Please point out the page. Quote
billybob Posted September 11, 2019 Posted September 11, 2019 Pro Cinema modules/bundle...wonder if that the 510 in the LCR rendering s... cool looking... Quote
billybob Posted September 11, 2019 Posted September 11, 2019 What an idea...Pro Cinema home Behind the scenes... this may fulfill some fantasies. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.