tickertape Posted April 15, 2021 Posted April 15, 2021 (edited) Hello, all. I just got a set of Chorus IIs but the passive radiators don't match plus one is torn. Any advice on how to approach them? Are these 1994s? The serials are consecutive. I got 2 Chinese made Synergy S2 with these Chorus IIs. The intact one has a rubber surround, while the torn one has folded paper fiber surround. EDIT: I pulled them and they're both marked KD16. The rubber surround one is probably a replacement and looks like it has what is probably a date on it 01/04/08. I located a 2018 thread that says the Forte III version fits tightly. I wonder if the Forte III from Klipsh (if still available) is a rubber surround? EDIT: it looks to be a rubber surround by looking at the online catalogue. I sold some Cornwall IIs in Walnut(?) several years ago and found some LaScala club finish for a friend, both in the 90s. Klipsch will work for me. Edited April 15, 2021 by tickertape 1 Quote
billybob Posted April 15, 2021 Posted April 15, 2021 Welcome to the forum! Bumping this up where our creative members can advise. @tickertape Quote
001 Posted April 15, 2021 Posted April 15, 2021 hi. the forte 3 will work as mentioned in previous threads on here but they are cosmetically different & i think some have said they require minor modification to the opening to fit right, possibly a little too tight? you can also have your passives reconed from simply speakers, they offer a recone kit with the pleated fiber surrounds so they will look correct for chorus 2, you can buy just the kit & do it yourself or ship to them to be installed. https://www.simplyspeakers.com/Klipsch_bymfg_16-0-1.html Quote
billybob Posted April 15, 2021 Posted April 15, 2021 Please post a link to the "online catalogue" tickertape. Thanks! Quote
OO1 Posted April 15, 2021 Posted April 15, 2021 On 4/14/2021 at 9:28 PM, tickertape said: Hello, all. I just got a set of Chorus IIs but the passive radiators don't match plus one is torn. Ir is important to use the correct parts , otherwise , the speakers won't sound right - the Chorus II shipped with the KD-16 Passive radiator -----while the Forte III uses the KD-15 -2 very different parts in terms of specs - Given both your KD-16's are identical part numbers , both do perform equally , the torn woofer can be repaired temporarily with Black speaker rubber cement - Finally , the KD 16 Passive radiator recone kits from ----Simply Speaker are Aftermarkets kits versus klipsch Original which are made for your speakers 1 Quote
001 Posted April 15, 2021 Posted April 15, 2021 1 hour ago, RandyH000 said: Ir is important to use the correct parts , otherwise , the speakers won't sound right - the Chorus II shipped with the KD-16 Passive radiator -----while the Forte III uses the KD-15 -2 very different parts in terms of specs - didn't @Chief bonehead & others recently confirm the forte3 passive is the same spec as & will work for the chorus2? can you explain how they are "very different specs"? 1 Quote
Klipsch Employees Chief bonehead Posted April 15, 2021 Klipsch Employees Posted April 15, 2021 The forte 4 drone will work for the forte 3 and 2. The chorus drone is different but can be ordered at klipsch. if I did say that before, then I was wrong. 4 Quote
wuzzzer Posted April 15, 2021 Posted April 15, 2021 I repaired a torn woofer by using rubber cement to glue a strip of tissue paper to each side of the woofer. It didn't look great but it seemed to have worked. 3 Quote
The Dude Posted April 15, 2021 Posted April 15, 2021 8 minutes ago, wuzzzer said: I repaired a torn woofer by using rubber cement to glue a strip of tissue paper to each side of the woofer. It didn't look great but it seemed to have worked. I have seen similar repairs that worked as well. Being a passive, I would think that it is less crucial. 2 Quote
tickertape Posted April 15, 2021 Author Posted April 15, 2021 (edited) Thanks, all. And thanks for the follow up on the Forte style usage. A temp repair to get by will be attempted. The catalogue I mentioned is actually the Klipsch webpage where the Forte images are located under the Heritage offerings. The rear view shows a rubber surround used. My radiators share the "KD-16" designation, but the rubber surround one has a 7 digit part number too and an apparent date of 01/04/08. The pleated one just says KLIPSCH KD-16 and "9310" which I'm guessing is an original date, but maybe it's a part number? No other markings I noticed. The Simply Speakers images show a pleated surround so I'd have to do both. A rubber surround version will satisfy my ear. I'm just running a Carver receiver for now. There's a Hafler preamp and a Rotel amp around somewhere. Anyone know which phone number is the correct one for parts ordering? I see 544-7724 for order from Klipsh.com, P: 317-860-8100 / 800-544-1482 Klipsh headquarters and P: 317-860-8100 / 800-544-1482 for the Indianapolis Engineering location. Edited April 15, 2021 by tickertape 1 Quote
billybob Posted April 15, 2021 Posted April 15, 2021 (edited) Yes passives are repaired everyday. Have used silicone myself with good results. Welcome again! Edited April 15, 2021 by billybob 1 Quote
001 Posted April 15, 2021 Posted April 15, 2021 4 hours ago, Chief bonehead said: The forte 4 drone will work for the forte 3 and 2. The chorus drone is different but can be ordered at klipsch. if I did say that before, then I was wrong. so your previous statement that the forte 3 passive will work for the chorus 2 is now wrong? "You don't need the parameters. All you need is me saying that the drone in the III will work in the ii. That's all. " didnt a bunch of people buy the forte 3 passives for their chorus 2 based on this info? & is the KD16 for the chorus 2 available for sale from klipsch? as of the comment in 2018 the member said he was told by klipsch the KD16 is not available & they referred him to simply speakers. just trying to clarify this for the OP & future members that may read that thread or the others saying the forte 3 passive is correct for chorus2. 1 Quote
Frzninvt Posted April 15, 2021 Posted April 15, 2021 The weighting needs to be identical to the original drone or they will not work correctly. Quote
oldred Posted April 15, 2021 Posted April 15, 2021 Simply speakers does a good job....had a couple of pairs of Forte II pairs done by them.....They stopped doing repairs for a while...but is seem like they are back at it... Can't got wrong sending them out to them.... George, 2 Quote
001 Posted April 16, 2021 Posted April 16, 2021 18 hours ago, Frzninvt said: The weighting needs to be identical to the original drone or they will not work correctly. that is correct, im trying to get confirmation regarding the forte 3 passive being used in the chorus 2... it was stated more than once in the recent past that its acceptable to use the F3 in a CH2... Quote
jjptkd Posted May 9, 2021 Posted May 9, 2021 On 4/16/2021 at 9:48 AM, EpicKlipschFan said: that is correct, im trying to get confirmation regarding the forte 3 passive being used in the chorus 2... it was stated more than once in the recent past that its acceptable to use the F3 in a CH2... On 4/15/2021 at 9:47 AM, Chief bonehead said: The forte 4 drone will work for the forte 3 and 2. The chorus drone is different but can be ordered at klipsch. if I did say that before, then I was wrong. Pretty clear here the Chief had previously made an error and has owned up to it, it happens. I imagine the Forte passive would work in a pinch but tuning would be off because of different weight? If exact weights for each were known they could be modified to work if actual KD-16's are no longer available. 1 Quote
001 Posted May 10, 2021 Posted May 10, 2021 23 hours ago, jjptkd said: Pretty clear here the Chief had previously made an error and has owned up to it, it happens. I imagine the Forte passive would work in a pinch but tuning would be off because of different weight? If exact weights for each were known they could be modified to work if actual KD-16's are no longer available. yes errors happen. after re-reading that thread i wonder how many people have kd15 passives in their chorus 2 & dont realize they are different? might be a good idea to at least update that thread so hopefully the people who posted that they did it & future readers see it & know it's not correct... i know i would want to know about it. Also chief says above that the chorus drone can be ordered from klipsch, is this correct? is it newly available? i never got confirmation on that question. 1 Quote
finallygotmyheresies Posted May 20, 2021 Posted May 20, 2021 On 4/15/2021 at 9:47 AM, Chief bonehead said: The forte 4 drone will work for the forte 3 and 2. The chorus drone is different but can be ordered at klipsch. if I did say that before, then I was wrong. Can I return Forte 3 Passive radiators that are still new in the box and get them replaced with new Chorus II PR's? You were very adamant at defending your position that the Forte 3 PR was a acceptable replacement for the Chorus 2. The process of ordering parts from Klipsch has never been especially pleasant nor quick. Quote
314carpenter Posted May 20, 2021 Posted May 20, 2021 28 minutes ago, finallygotmyheresies said: Can I return Forte 3 Passive radiators that are still new in the box and get them replaced with new Chorus II PR's? You were very adamant at defending your position that the Forte 3 PR was a acceptable replacement for the Chorus 2. The process of ordering parts from Klipsch has never been especially pleasant nor quick. What did you pay for them? If you have any issue getting an RMA on those I am sure there is interest here for them. 1 Quote
finallygotmyheresies Posted May 20, 2021 Posted May 20, 2021 10 hours ago, 314carpenter said: What did you pay for them? If you have any issue getting an RMA on those I am sure there is interest here for them. Their price is very reasonable when bought directly from Klipsch which is why I went with new versus a rebuild kit. I paid about $85 ea delivered. Shipping alone would be $40-50 without a business rate. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.