All Activity

YEAH!!! @billybob Guud Stchuphff Got this going here

1-If your Yamaha has bass management, use the LFE input and turn the crossover on the sub as high as it’ll go and set the crossover point on the Yamaha. 2-Any shielded RCA cable will work. 3-No. SVS makes them along with many other companies but you’ll have to figure out if they’ll fit your sub.

Can’t wait to hear some more information about this. Welcome to the Forum.

Welcome to the forum. You will get a lot of great info. on this question. Travis

Welcome to the Forum. Nothing too basic here. We will get this answered for you. Can you post a photo or two of them. Can you get a model number from the one outside or is it flush mounted to a ceiling also. A photo of where the wires come out of the wall might help as well. You should have 3 pairs of wires exiting somewhere. One pair for each speaker. They may have had a speaker selector box to select which speakers, 1, 2 or 3 or any combination. Then we need to figure out if the speakers are the normal type that can be run with a typical 3 ch. receiver, or if they are a 70v sound distribution system. Don’t be overwhelmed, this stuff is pretty darn easy once we help you answer some basic questions. Photos of speakers, model no. a plus, and photo where these wires come out will get you the answers. Travis

Under...

I am throwing this out for a trade potential, it’s been fully recapped. new transistors, diodes, resistors where needed and required. Dolby board pinned and recapped as well. Sounds wonderful and is a looker too. Wood housing is very nice with no damage. would love a pair of Klipschorns or La Scalas in less than great shape as long as drivers are correct. I have enough veneer to play with and want to make some special speakers for my space. i can drive 150 miles from mobile Alabama for a meet up if anyone is interested. thanks for looking.

Rotel RA-1592 Integrated Amplifier for sale. Very nice condition with no scratches or marks, and working perfectly. Plenty of clean power and detail on both my A/D/S and Klipsch speakers. The RA-1592 is a combination of Rotel's powerful 200 watt Class AB amp; the RB-1582 MkII, and the award winning RC-1590 pre-amp. This gives the best of both worlds in one unit. This is a very powerful and robust amp that delivers it's 200 watts with what Rotel calls "dual-mono block topology. The pre-amp runs clean and quiet, and includes the superb AKM 32-bit/768kHz digital-to-analog converter (DAC). Balanced XLR inputs, speaker outs A and B and includes the Rotel remote. RCA pre-outs, dual sub-woofer outs, plus trigger outs to turn on and off other connected units. The RA-1592 weighs 37 pounds net weight and will ship in the factory Rotel box. Pictures are included in the ad and please feel free to contact me with any questions. $895.00 plus shipping cost: $45.00 flat rate, lower 48 states only, reasonable requests only. Rotel RA-1592 had a retail price of $2399.00 Thanks for looking! Includes: Power cable, RCA cable, Rotel CD disk, USB cable and remote.

40 some Odd nights:

Power Play:

Yep. I have two AU717 and an AU919 that need to be restored due to the glue. I have an AU719 and one AU717 that have been gone through. I have the G8000, 9090db and the AU7700 that didn't get the corrosive glue.

If you can, do it Bruce...

I would love a pair of Khorns. 3.5 hours away and I have a truck.

Play ball:

We bought a house with these installed. We 2 in the ceilings and one outdoors. Do I need something special to use them? Is there a switch to select where should play such as inside only, all, or just a selected speaker? Sorry for the very basic questions.

I concur, Greg at Nelion has restored and upgraded 4 Carver amps for me: M1.0t, M1.5t, and two M4.0t's in the past 1-1/2 years. I got the premium upgrade service on all the amps that was available at the time, although shortly after I got my M4.0t's back, he announced an upgrade option to these that pushed output to 475 watts or something like that. Well these drive Khorns so don't need the power anyway. The first amp was turned around in 2 weeks, the second, in one month, and the two M4.0t's took 2 months (went in at the same time). Highly recommended

Nice guy Gorgeous amplifier GLWYS!

So, Birthday Bash People, Keeping it lite. My CDs have been sent. Late but sent. There should be enough for attendees. *The Story I had a vinyl record test pressing produced of an album of music that I made. The music was produced through a Heresy IV speaker system. The musical experience was unique. Quite unique. Before you think that I am simply promoting my music and looking for cheap way to do that - STOP! What was achieve that day was an uncanny experience that I hope would be the key to a possibly better speaker system. I’m taking a lot of personal innovation in getting this information out to everyone. Because you really should hear the music the way that I heard it that day. If and when you hear it, you will understand. Audio signals produced through speakers do not typically bend in that manner. I produced music. I’m pretty certain that everyone’s mouth hanging open meant that something just happened. , yeah about 74 minutes or something.

@tagger

Almost had them sold, but fell through. Still available!

Still interested in these! Shoot me a pm

Back home in NY. While the trip to see the folks in Florida went well, and I am always thrilled to see Mom and Dad. The fact that it is now 62F outside and not 96F with 100% humidity makes me happy in a way mere words cannot do justice to.