CECAA850 Posted February 27, 2019 Share Posted February 27, 2019 4 minutes ago, Sound.Theory said: Are there schematics for the rp-280f towers, rp-450c center channel, and rp-502s surrounds? They're pretty new models. Unless sonmeone has removed their set and drawn them up I doubt it. Link to comment Share on other sites More sharing options...
stepher Posted March 7, 2019 Share Posted March 7, 2019 (edited) On 1/23/2019 at 9:40 AM, stepher said: Hi All, UPDATE No. 2 Just got an "official" KG2.2 Crossover Schematic (Ver. B?) from Klipsch directly for those who may be interested (See KG2.2B.... below...and apologies I couldn't figure out how to show it as an image . No info on whether the caps are NPO electrolytics (all may be) or some form of film caps. Also no info on tolerance or voltage specs. However, most of the info I've seen indicate 100VDC. Tolerance is up to you (10%, 5% or 1%), depending on how much you want to pay for the caps. Enjoy and cheers.... Quote UPDATE: Brain must not yet be engaged Forgot to attach a schematic I found (iirc on audiokarma.org). I added the notes on the lower left from someone's comments...thus not sure what's valid. ----------------------------------------------------------------------------------------------------------------------------------------------------------- I'm looking to "refresh" the x-over caps in my KG 2.2s (I'm original owner). I was wondering if there was a "real" schematic out there for these spkrs (might also be for KG2.5s since they are somewhat similar...or maybe not). I've come across a couple of schematics but some cap and res values are different (old saying: "A man with no watch never knows the time. A man with 2 is never sure."...I'm a man with 2 Thanks in advance...cheers.... KG2.2 Crossover Schematic (maybe).pdf KG2.2B Crossover Schematic.pdf Edited March 7, 2019 by stepher Link to comment Share on other sites More sharing options...
CANT Posted March 12, 2019 Share Posted March 12, 2019 Here's a schematic for the KPT-310... I left off the 200ohm/polyswitch protection on HF Link to comment Share on other sites More sharing options...
CANT Posted March 18, 2019 Share Posted March 18, 2019 Schematic for the KPT-942... left off the 200ohm/polyswitch protection on HF again Link to comment Share on other sites More sharing options...
CGNMan59 Posted March 23, 2019 Share Posted March 23, 2019 New to the forum and currently own KG3.5's. I have decided to change out the caps first on these. Today I took out the crossover to confirm the capacitors. What is interesting is the pcb is for KG3 and KG1. The 8uf cap is soldered into a location that is labeled 7uf. I'll go with the 8uf unless somebody has a reason to go with a 7uf. Link to comment Share on other sites More sharing options...
Dave A Posted May 11, 2019 Share Posted May 11, 2019 Judging by what is marked on that board I think it may have been designed for more than one speaker and components changed to suit. 1 Link to comment Share on other sites More sharing options...
wvu80 Posted June 1, 2019 Share Posted June 1, 2019 CF-4 v3 schematic Klipsch CF-4 Schematic(1)(1).pdf Link to comment Share on other sites More sharing options...
Konstantin / SLP Posted June 6, 2019 Share Posted June 6, 2019 (edited) I bought used Cornwall III and they don't sound like they should. 😥 This pair is about 10 years old and their cabinets/horns/drivers have signs of repair/upgrades. I believe the drivers are not properly connected. Does anyone have a crossover scheme for Cornwall III? 🙏 Thanks, Konstantin. Edited June 6, 2019 by Konstantin / SLP 1 Link to comment Share on other sites More sharing options...
watson96 Posted June 8, 2019 Share Posted June 8, 2019 (edited) ☺️ Edited February 7, 2021 by watson96 1 Link to comment Share on other sites More sharing options...
moray james Posted June 8, 2019 Share Posted June 8, 2019 On 6/8/2019 at 3:51 AM, watson96 said: It must be a great trade secret! You scoff at the company as if what they do is child's play and that any fool could reproduce or better their results with some on line free design program. Figuring out crossovers is complicated stuff otherwise we could do it ourselves. Who wants to give their experience and insights into how to design well away to the competition? I came across this schematic on line I cannot vouch for it. I don't have a CW3 or know anyone who has a pair. Perhaps someone who owns a set and is willing to pull the network and poke around can confirm or deny? 2 Link to comment Share on other sites More sharing options...
moray james Posted June 12, 2019 Share Posted June 12, 2019 Klipsch Tangent 30/40 schematic Link to comment Share on other sites More sharing options...
Bacek Posted June 25, 2019 Author Share Posted June 25, 2019 Anyone knows what crossovers where used in lascala with k-55-m squaker? AL to al-3 or only some of them? Link to comment Share on other sites More sharing options...
Deang Posted June 25, 2019 Share Posted June 25, 2019 That is correct. AL, AL-2, and AL-3. Link to comment Share on other sites More sharing options...
Sound.Theory Posted July 17, 2019 Share Posted July 17, 2019 Anyone have schematics for the RF-7 III towers, RC-64 III center, and the RP-250S surrounds? Link to comment Share on other sites More sharing options...
babadono Posted July 17, 2019 Share Posted July 17, 2019 29 minutes ago, Sound.Theory said: Anyone have schematics for the RF-7 III towers, RC-64 III center, and the RP-250S surrounds? Ah... these are current products..... Good Luck. Link to comment Share on other sites More sharing options...
Vicaire Posted August 4, 2019 Share Posted August 4, 2019 On 08/06/2019 at 18:22, moray james said: Vous vous moquez de l'entreprise comme si son travail était un jeu d'enfant et que tout imbécile pourrait reproduire ou améliorer ses résultats avec certains programmes de conception gratuits en ligne. Trouver des croisements est une tâche compliquée, sinon nous pourrions le faire nous-mêmes. Qui veut donner son expérience et ses idées sur la manière de concevoir pour la concurrence? Je suis tombé sur ce schéma en ligne, je ne peux pas en témoigner. Je n'ai pas de CW3 ni connais personne qui en a une paire. Peut-être que quelqu'un qui possède un jeu et qui est prêt à tirer le réseau et à fouiller peut confirmer ou nier? Hello from France (Europe). Sorry for my bad english (or american). I got Cornwall III since 2014 and very happy with them (with a Pass Labs INT 30, miam !) but i'm not an electronic specialist, so impossible to say if this diagram is good or not. It would be good to find a diagram for Cornwall III !! Link to comment Share on other sites More sharing options...
billybob Posted August 4, 2019 Share Posted August 4, 2019 2 hours ago, Vicaire said: Hello from France (Europe). Sorry for my bad english (or american). I got Cornwall III since 2014 and very happy with them (with a Pass Labs INT 30, miam !) but i'm not an electronic specialist, so impossible to say if this diagram is good or not. It would be good to find a diagram for Cornwall III !! Looks like could be the schematic, not sure though... Your crossovers should be fine since only about only 5 years old... Welcome... Link to comment Share on other sites More sharing options...
Vicaire Posted August 5, 2019 Share Posted August 5, 2019 (edited) OK Billy, than'ks !! well, they only have 5 years but one of the boomers "died" in 2018. I don't know why, i never do "special nights" with my hifi..... In France it's impossible to find Klipsch Speakers, so i installed Eminence Kappa 15 instead of the originals. The Eminence are very good and work well. Edited August 5, 2019 by Vicaire 1 Link to comment Share on other sites More sharing options...
moray james Posted August 5, 2019 Share Posted August 5, 2019 3 hours ago, Vicaire said: OK Billy, than'ks !! well, they only have 5 years but one of the boomers "died" in 2018. I don't know why, i never do "special nights" with my hifi..... In France it's impossible to find Klipsch Speakers, so i installed Eminence Kappa 15 instead of the originals. The Eminence are very good and work well. if you still have the woofer that died you have nothing to loose by re flowing the solder joints of the tinsel leads to the terminal tab. That might correct the problem as cold joints do happen. If it still does not work you can lift the dust cap to see if you can access the other end of the tinsel leads to the actual voice coil wire and re flow those as well then if it still does not work it is time for a recone job. The Kappa was no doubt a good replacement choice. Enjoy your speakers. 1 Link to comment Share on other sites More sharing options...
billybob Posted August 5, 2019 Share Posted August 5, 2019 1 hour ago, Vicaire said: OK Billy, than'ks !! well, they only have 5 years but one of the boomers "died" in 2018. I don't know why, i never do "special nights" with my hifi..... In France it's impossible to find Klipsch Speakers, so i installed Eminence Kappa 15 instead of the originals. The Eminence are very good and work well. Think some here hold that speaker in high regard. They are your speakers to do with what you would like to do. If any questions, please start a new topic thread and we will address then... or continue here... Do you have any idea why your 15 inch woofer stopped working...?...welcome again. Link to comment Share on other sites More sharing options...
Recommended Posts