ToolShedAmps Posted July 24, 2018 Share Posted July 24, 2018 It's been awhile since I've posted to the forum for various reasons. However, I thought this would be an appropriate vehicle to allow those interested to see the construction of an amplifier from start to finish..... the ToolShed way. As many of you may know, shortly after the pilgrimage we unexpectedly lost a great addition to our extended Klipsch family, Henry "Scott" Yocum. He was a jovial, kind-hearted, Klipsch lover that I came to know during the several months he was in my queue. We had half a dozen hour-long conversations about everything from music, speakers/amplifiers to food. He will be greatly missed. The amplifier that will be constructed on this build thread is his. Built exactly as he wanted it, with the exception that it will have his name etched into the top plate where the name of the amplifier normally goes. Hopefully, once completed, his family will listen to it through his beloved K-Horns and the music will touch them as it did him. So, if you have interest, tune-in as I'll be posting pics as well as text to walk y'all through this build over the next few weeks. Godspeed Scott..... Matt. 10 Quote Link to comment Share on other sites More sharing options...
Schu Posted July 24, 2018 Share Posted July 24, 2018 In 1 Quote Link to comment Share on other sites More sharing options...
Guest wdecho Posted July 24, 2018 Share Posted July 24, 2018 Glad to see you back posting Matt. I look forward to seeing your post on the build. Sorry about you losing your friend. Quote Link to comment Share on other sites More sharing options...
DizRotus Posted July 24, 2018 Share Posted July 24, 2018 Count me among those interested in following this. 1 Quote Link to comment Share on other sites More sharing options...
ssh Posted July 24, 2018 Share Posted July 24, 2018 I'm looking forward to pics, Matt, and I'll make sure that his family sees this. SSH 2 Quote Link to comment Share on other sites More sharing options...
Dave1290 Posted July 24, 2018 Share Posted July 24, 2018 Great tribute Matt. Being new around here is great imo. Nice to see family come together! I'd enjoy watching and learning more as you go! 1 Quote Link to comment Share on other sites More sharing options...
codewritinfool Posted July 24, 2018 Share Posted July 24, 2018 Great idea and I can’t wait to see the build. 1 Quote Link to comment Share on other sites More sharing options...
No.4 Posted July 25, 2018 Share Posted July 25, 2018 I love build threads, In. 1 Quote Link to comment Share on other sites More sharing options...
joshnich Posted July 25, 2018 Share Posted July 25, 2018 Way In! 1 Quote Link to comment Share on other sites More sharing options...
Shakeydeal Posted July 25, 2018 Share Posted July 25, 2018 In too! 1 Quote Link to comment Share on other sites More sharing options...
rockhound Posted July 25, 2018 Share Posted July 25, 2018 This is awesome Matt!!!! 1 Quote Link to comment Share on other sites More sharing options...
ToolShedAmps Posted July 25, 2018 Author Share Posted July 25, 2018 OK, a brief description of Scott's amplifier is in order before we begin. His amplifier will be a variation of my PWK Special Edition Euphoria Stereo 45 amplifier. His will be a Two-stage, Triode-Strapped Pentode (E180F/E280F/D3a) driving a 2A3 Triode. It will be tube rectified via GZ37 or 5U4g. DC filament heaters for the driver stage and AC heating for the 2A3's. I am including top-plate mounted "hum" pots for the 2A3 filaments for the very 1st time so that Scott's family can even elect to swap in some of the very inexpensive Chinese tubes and have a means of balancing the heater rails. Additionally, as gobs of power is unnecessary to drive K-Horns, we had elected to use a pair of my very favorite output transformers with a 5K primary winding which will yield approx. 4 watts RMS into the typical Klipsch 8 Ohm load. For the DIY'ers among you, I will publish the schematic for the circuit and power supply "as built" at the end of the thread. As per usual, every amplifier begins with the wood base. Scott had decided on the "standard" Klipsch 2Tone flavor of Curly White Oak and Black Walnut. I'll post pics this evening. Cheers! Matt. 4 Quote Link to comment Share on other sites More sharing options...
guywithwine Posted July 25, 2018 Share Posted July 25, 2018 Great gesture! Scott was a key supporter of the Klipsch Museum and great sound. We miss him... 3 Quote Link to comment Share on other sites More sharing options...
MC39693 Posted July 25, 2018 Share Posted July 25, 2018 This is going to be a great read and gesture, good on you Matt. 2 Quote Link to comment Share on other sites More sharing options...
rigma Posted July 26, 2018 Share Posted July 26, 2018 I am in. 1 Quote Link to comment Share on other sites More sharing options...
ToolShedAmps Posted July 26, 2018 Author Share Posted July 26, 2018 Hey all, as promised, here are a few detailed photos of how my amp bases are built in house. The base dimensions are 12" X 9 1/2" X 3 1/4". Comprised of 16 separate pieces, the 5/8" sides and front/back are "finger" joined and glued. The 8, 1/2" X 1/2" cleats are glued 1/8" from the top and bottom of the frame allowing for a reveal for the top and bottom plates to sit flush. When dry, finally the 4 glue blocks for the feet are glued in. When all is dry, everything is sanded from 100 grit all the way to 380 grit. NOW the fun starts! Every amp base has 8 coats of pre-catalyzed lacquer applied with 400 grit block sanding between each and every coat. After the last coat is applied and allowed to cure completely (2 days) the base is rubbed out with grey then white Scotchbrite pads. The last step is waxing the bases with Black Bison "dark" paste wax (this is the step represented by the photos), allowed to dry for a few days prior to buffing on my wheel with carnuba wax. The next installment will address the 1/8" (3mm) 6061 Aluminum plates, how I cut them to dimension and mill them. Cheers! Matt. 4 Quote Link to comment Share on other sites More sharing options...
ToolShedAmps Posted July 26, 2018 Author Share Posted July 26, 2018 A couple more pics showing the cleats. 3 Quote Link to comment Share on other sites More sharing options...
richieb Posted July 26, 2018 Share Posted July 26, 2018 I'm waiting to see how you go about acid etching the face and top plates. Being very familier with the process on an industrial level I'm curious how you go about this at the "cottage" level. Should I assume etched stainless? Quote Link to comment Share on other sites More sharing options...
ToolShedAmps Posted July 26, 2018 Author Share Posted July 26, 2018 22 minutes ago, richieb said: I'm waiting to see how you go about acid etching the face and top plates. Being very familier with the process on an industrial level I'm curious how you go about this at the "cottage" level. Should I assume etched stainless? Hi Richie, No, actually it's 6061 Aluminum, not stainless steel. And that process will be highlighted following the next installment. I do use fairly benign chemicals, however, when combined and the aluminum plates are added the witches brew becomes fairly violent (I don't recommend anyone try this at home). Matt. Quote Link to comment Share on other sites More sharing options...
Guest wdecho Posted July 26, 2018 Share Posted July 26, 2018 7 hours ago, ToolShedAmps said: Hey all, as promised, here are a few detailed photos of how my amp bases are built in house. The base dimensions are 12" X 9 1/2" X 3 1/4". Comprised of 16 separate pieces, the 5/8" sides and front/back are "finger" joined and glued. The 8, 1/2" X 1/2" cleats are glued 1/8" from the top and bottom of the frame allowing for a reveal for the top and bottom plates to sit flush. When dry, finally the 4 glue blocks for the feet are glued in. When all is dry, everything is sanded from 100 grit all the way to 380 grit. NOW the fun starts! Every amp base has 8 coats of pre-catalyzed lacquer applied with 400 grit block sanding between each and every coat. After the last coat is applied and allowed to cure completely (2 days) the base is rubbed out with grey then white Scotchbrite pads. The last step is waxing the bases with Black Bison "dark" paste wax (this is the step represented by the photos), allowed to dry for a few days prior to buffing on my wheel with carnuba wax. The next installment will address the 1/8" (3mm) 6061 Aluminum plates, how I cut them to dimension and mill them. Cheers! Matt. Being a woodworker I can really appreciate that wood and quality of build. Great job Matt. I should say woodworker at heart, more heart than woodworker now. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.