Garage Sale
Have audio-related equipment to sell? Post here!
Remember, Klipsch is not responsible for resulting transactions - buy with caution! No dealers, please.
Rules for Posting in this Section
The original Terms of Service apply.
Additional policies for posting your Ad:
- Klipsch is not involved with sellers or buyers from this section in any way, and cannot be held liable for any problems occurring with transactions.
- Klipsch is not responsible for verifying the authenticity of sales posted here.
- Remember to be diligent with any online transaction, verifying the legitimacy of the seller and item before purchasing.
- Klipsch reserves the right to delete any post without warning.
- Audio related items only.
- No commercial advertising or sales solicitations by a business.
- Public discussions concerning transactions or disagreements are not permitted. You must contact the seller directly.
- You may post a link to your item on sites such as eBay, Audiogon, and Craigslist, however discussions/disagreements concerning these sites or any payment site (i.e., PayPal) are not permitted.
- Reporting issues: If you feel someone has abused this section of the forum, you must report it directly to a Klipsch Admin or mod using the "report" button. Do not post about thses issues on the forum.
- Please keep topics ON-TOPIC, and avoid "thread-crapping". Topics should only be "Garage Sale" ads. Post about other topics in their relevant sub-forums elsewhere on the Klipsch boards.
- Any post violating the above guidelines will be subject to being closed and/or deleted, and the posting member warned. Repeat violators are subject to being banned.
- Continued abuse of this section will result in its discontinuation without notice.
Please also be aware that Klipsch warranties are non-transferable.
Subforums
-
- 54.8k
- posts
13439 topics in this forum
-
- 19 replies
- 2.1k views
-
- 10 replies
- 2.1k views
-
- 0 replies
- 227 views
-
- 5 replies
- 962 views
-
- 3 replies
- 205 views
-
- 2 replies
- 439 views
-
- 3 replies
- 211 views
-
- 0 replies
- 582 views
-
- 19 replies
- 2.8k views
-
- 0 replies
- 456 views
-
- 6 replies
- 1.2k views
-
- 4 replies
- 744 views
-
- 1 reply
- 509 views
-
- 3 replies
- 1.4k views
-
- 2 replies
- 621 views
-
- 26 replies
- 2.4k views
-
- 12 replies
- 2.1k views
-
- 0 replies
- 205 views
-
- 2 replies
- 446 views
-
- 4 replies
- 546 views
-
- 20 replies
- 4.4k views
-
- 0 replies
- 388 views
-
- 21 replies
- 1.7k views
-
- 15 replies
- 1.7k views
-
- 7 replies
- 875 views
.thumb.JPG.e865cb9742a8f1a873e5b238842d7c3f.JPG)
-
Recent Posts
-
By Invidiosulus · Posted
This afternoon my bourbon buddy was playing some tapes on his reel to reel down in the shop. -
-
I am aware of that. I was curious to know if some enterprising individual may have found an analogue. I do see Copper colored speakers (and parts) on Aliexpress. I'd even be curious to know if the copper color'd polypropylene/aluminum sheets are available. bob. -
Hi! As the title says, looking for unblemished drivers for my RF-7 Series 1s. I am hoping the find 2 of them! Thanks, bob
-
Another thought that I had, is whether or not it is feasible to "Transplant" a RF-7II or RF-7III driver from the "Round" basket to the "Square-ish" basket from a donor RF-7 10" driver? This would entail re-foaming the edge of the cone to the older basket. This isn't an ideal solution but perhaps could work. Another idea I have kicked around is create an adaptor ring that could be inserted into the RF-7 cavity and allow the RF-7II/III speaker to used as a drop-in replacement. Bob..
-
there are no copper style recone kits on the market -
By Full Range · Posted
Apart from waking the neighbour’s ‘Did you notice that the record collection grew as well - just like your situation -
-
The Mystery Man came over An' he said: "I'm outa-sight!" He said, for a nominal service charge I could reach Nirvana t'nite If I was ready, willing 'n able To pay him his regular fee He would drop all the rest of his pressing affairs And devote His Attention to me But I said Look here brother Who you jivin' with that Cosmik Debris? Now what kind of a mask man are you anyway? Look here brother Don't you waste your time on me The Mystery Man got nervous An' he sorta, fidget around a bit He reached in the pocket of his Mystery Robe An' he whipped out a shaving kit Now, I thought it was a razor An' a can of foamin' goo But he told me right then when the top popped open There was nothin' his box won't do With the oil of Afro-dytee An' the dust of the Grand Wazoo He said "You might not believe this Pancho, but it'll fix up that war paint for you too" An' I said Look here brother (thank you mask man. thank you) Who you jivin' with that Cosmik Debris? Ah, mask man is a ****** Look here brother Don't you waste your time on me I've got troubles of my own, I said An' you can't help me out So take your meditations an' your preparations An' ram it up yer snout "BUT I GOT A KRISTL BOL!", he said An' held it to his horse So I snatched it All away from him An' I showed him how to do it right of course I wrapped a newspaper 'round my head So I'd look like I was Deep I said some Mumbo Jumbos then An' told him he was goin' to sleep I robbed his rings An' pocket watch An' everything else I found I had that sucker hypnotized He couldn't even make a sound I proceeded to tell him his future then As long as he was hanging around I said "The price of pajamas has just gone up An' yer ol' swarmy have just gone down" Look here swarmy Who you jivin' with that Cosmik Debris? (Now is that a real poncho or is that a Seattle poncho who can tell anymore?) Don't you know You could make more money in sindication So don't you waste your time on me Ohm shonty, ohm shonty, ohm shonty-ohm
-
Hi Everyone, Has anyone taken a look at re-coning the copper style speakers? I am guessing that the trick is to find the copper color'd material to generate a cone, in the first place. I bet there is a reasonable demand for this type of fix! I have some unblemished drivers on their way to me, to replace some on my RC-7. I may attempt to disassemble one of the blemished ones, to see what is needed. Ideally, I want to find at least two R-1089-AVs for the RF-7 (series 1s.) These are pretty hard to find. These would certainly be a candidate for a re-cone operation, if I could figure it out. Bob.
-