Leaderboard

Just received my new pair of CWIII’s. Walnut with 70th gold luster grills. Have to say, look and sound pretty good. I have them paired with all McIntosh tube gear. Going to take some time to break in.

… i'd like to share my experience with a recent purchase of a store brand of coffee from an ice cream shop... don't do it... I still wonder why I did it... there are few word's to describe smokey kindlin' or tent pole shavings... wait a minute... why am I thinking about wood after drinking my new coffee stuff, dang, this is going to be around for about 6 weeks now, doggonnit'.

It's been said that this is a 'plug & play' solution..... you plugged it in and now get to play around trying to figure it out. I was wondering if perhaps you pulled my typical stunt (not even sure I know enough about it to properly describe it) Intuitively, it seems to me that a "High pass" should go on the tweeter and "Low pass" should go on woofer when it's the other way around. I've done that more than I care to admit and it will give you weird sound. I have to remind myself of what it means whenever I tinker with it so I don't screw it up.

There's 56 people in my direct family, so multiple birds will be cooked, and multiple methods of cooking. My favorite is my brother's deep fried version, smoked is pretty good also.

I have a problem eating too much already, that would not help at all. It would be like a never ending cycle until I explode. .

you did not learn the first time.. with mccrapfee ....

Clear lacquer coat.

Rec Tec RT 700

I did three 20 pounders @ 225 for 6 hours 9 minutes week before last.

Re. the wood supplied for smoking ... does he deliver to Calgary? Brother - in - law just got a Napa wine barrel for use in smoking ... try it, you'll like it too. But that stack of smoking wood looks great!

That lava lamp is much too modern and, as such, is definitely not timbre matched to those Khorns! The LL people went to a cheaper Chinese wax in 1994 that has completely different tonal characteristics. The least you could do is swap out the light bulb for one with a Crites filament. Pretty speakers, btw. Wish I lived closer. Matthew

He may just be the MVP candidate to beat. Bill

Brees has them cruising right along.

So what model or components of Cornwall 1,2 or 3 do you like.....😉

Thats what I did just a little after I could walk. Even made a few bucks doing it for a major soft drink company in high school.

Sanded veneer and stained veneer.

Glad I’m not closer.....for several reasons.

Location for locals and a phone number please. Cash money in hand.

Well I sold the pair I was using in stereo but yes, when I had them I stood them up vertically after rotating the horns, they are really pretty unbelievable as main speakers very crisp and detailed with bass aplenty.

MOOOOooooooOoOoOOO!

They sound really good in this room. On May 24, the Klipschorn garage speakers have been updated to operate in passive Bi-Amp configuration. I believe that they sound better this way. New picture of the 4 conductor wires on page 4 of this thread.

Just to comment on the DIY Dayton stuff. Ive built 4 of the 3 cubic foot boxes using the HF15 driver. Two used a plate amp (daytons own that has premilled marks on the MDF for where to install it if you choose) and two using an external crown amp. All have been used either with La Scala, Belle, and now Forte III and using a Marantz receiver they have all blended flawlessly... better performance for substantially cheaper than commercial stuff if you are willing to sink a few hours into it

Yes and one of their losses is to the Giants

Not yet. I was starting to give up after sending him a text and calling earlier in the day. Finally, he responded saying he wasn't feeling the greatest and that he would call me tomorrow about them to figure something out Still no indication that this is a scam or anything on my end. I pray it's not. I will let you know.

You'll want to take each driver out and test them with an ohm meter. Report back with your readings. Could be something fried in the crossover as well. Hate to replace drivers that are working only to find that that wasn't the problem. Also check all external wiring and wouldn't be a bad idea to connect a different speaker to that output as well. Lots of things that could be the culprit.

That looks much better.

If you haven't already added these, and no I didn't get to purchase them. I'm assuming sold for $1800.:

I just read The Five Little Bunnies. Man, it is profound.

so is your avatar !

Since Klipsch speakers have sound that holds up over time getting the RP-280F to me means getting quality sound. Is the 8000F an upgrade in sound? I don't know, but they would be in the same mid-tier category that Klipsch offers. I would not exchange one mid-tier speaker set for another. The bigger issue IMO is if a person were starting out with a new system or a complete upgrade I would go with the newest speakers. Not because of superior sound but because it will be easier going forward to match the L/C/R and surrounds.

I usually butterfly my bird and use dry herbs...

Ummm, is that some exotic disease? Have I caught it?

malocchio https://www.italiangenealogy.com/articles/italian-culture-traditions/il-malocchio-the-evil-eye Dio "throwing horns", a gesture commonly used by both artists and fans of heavy

I LITERALLY JUST saw a rat and his *** in fedex last night, does that count? First tien ever seeing that in SOCAL in a place of business.

Before either one meant or wanted.

Something about those older women when you are younger..... Shake it off son shake it off....its over and done with.

I say get the RB-61s for $200.00 or for less and be content. They are very fine speakers that punch way above their weight class. With that said, still continue to hunt for a deal on your desired RS-62s and cross that road when you get there. Then you could move the 61s somewhere else or sell them to help pay for the 62s. Just noticed you found 81s for $300.00. Also a good deal. Bill

HER TELEPHONE COMPANY PreviousNext An elderly lady phoned her telephone company to report that her telephone failed to ring when her friends called - and that on the few occasions when it did ring, her pet dog always moaned right before the phone rang. The telephone repairman proceeded to the scene, curious to see this psychic dog or senile elderly lady. He climbed a nearby telephone pole, hooked in his test set, and dialed the subscriber's house. The phone didn't ring right away, but then the dog moaned loudly and the telephone began to ring. Climbing down from the pole, the telephone repairman found: 1. The dog was tied to the telephone system's ground wire via a steel chain and collar. 2. The wire connection to the ground rod was loose. 3. The dog was receiving 90 volts of signaling current when the phone number was called. 4. After a couple of such jolts, the dog would start moaning and then urinate on himself and the ground. 5. The wet ground would complete the circuit, thus causing the phone to ring. Which demonstrates that some problems CAN be fixed by pissing and moaning.

Yes I have cavities under my Klipschorns, because I wanted the tweeters to be at ear level while standing.

These games are always won in the trenches. It's amazing how a good offensive line can make a QB shine, look at Brady, he has unlimited time to find a receiver.

Careful! I consider myself in the "my first stereo" stage and don't plan on getting worse---well, maybe might get a bur grinder. I grind my own before each batch with a basic whirly-gig grinder shaking at times for distribution for 15 seconds. I typically spend up to $12 for 3/4lbs, and use a Bunn coffee maker---it will brew a full pot in 3 minutes and definitely outperforms the slow drip kind. It also makes a quick pot of water for tea. Your upgrade would include the type of maker and grinding---simple.